Parametric and structural optimization of the queuing network throughput

Consideration was given to the parametric and structural optimization of the throughput of various queuing systems. Solutions of these problems rely on a combination of the decomposition methods for optimization of the nonsmooth functions and search of the admissible solutions of the transportation problem, as well as on the majorant estimates of the efficiency of the integrated queuing systems.     

Mathematical models of formation of rational organizational hierarchies

A survey of Russian and foreign papers devoted to one of the burning trends of the theory of control of social and economic systems, i.e., mathematical models of formational of rational organization hierarchies is made. The following lines of investigations are emphasized: multilevel symmetrical hierarchies, hierarchies of knowledge, multilevel hierarchies of data processing, hierarchies and command theory, hierarchies of decision-making, hierarchies and contracts theory, and general model of optimal hierarchies search.     

Operating ratio of the technical systems,subjected to failures

The original way of definition of operating ratio in view of reliability of the equipment of the control, time of the control over periodic checks and time of restoration is offered. The received results allow to define the best value of operating ratio of system both in view of, and without taking into account operational expenses.     

ALTDSE: An Arnoldi–Lanczos program to solve the time-dependent Schrödinger equation

We describe a general ab initio and non-perturbative method to solve the time-dependent Schrödinger equation (TDSE) for the interaction of a strong attosecond laser pulse with a general atom. While the field-free Hamiltonian and the dipole matrices may be generated using an arbitrary primitive basis, they are assumed to have been transformed to the eigenbasis of the problem before the solution of the TDSE is propagated in time using the Arnoldi–Lanczos method. Probabilities for survival of the ground state, excitation, and single ionization can be extracted from the propagated wavefunction.

Program summary

Program title: ALTDSECatalogue identifier: AEDM_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEDM_v1_0.htmlProgram obtainable from: CPC Program Library, Queen's University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 2154No. of bytes in distributed program, including test data, etc.: 30 827Distribution format: tar.gzProgramming language: Fortran 95. [A Fortran 2003 call to “flush” is used to simplify monitoring the output file during execution. If this function is not available, these statements should be commented out.].Computer: Shared-memory machinesOperating system: Linux, OpenMPHas the code been vectorized or parallelized?: YesRAM: Several Gb, depending on matrix size and number of processorsSupplementary material: To facilitate the execution of the program, Hamiltonian field-free and dipole matrix files are provided.Classification: 2.5External routines: LAPACK, BLASNature of problem: We describe a computer program for a general ab initio and non-perturbative method to solve the time-dependent Schrödinger equation (TDSE) for the interaction of a strong attosecond laser pulse with a general atom [1,2]. The probabilities for survival of the initial state, excitation of discrete states, and single ionization due to multi-photon processes can be obtained.Solution method: The solution of the TDSE is propagated in time using the Arnoldi–Lanczos method. The field-free Hamiltonian and the dipole matrices, originally generated in an arbitrary basis (e.g., the flexible B-spline R-matrix (BSR) method with non-orthogonal orbitals [3]), must be provided in the eigenbasis of the problem as input.Restrictions: The present program is restricted to a ¹S^e initial state and linearly polarized light. This is the most common situation experimentally, but a generalization is straightforward.Running time: Several hours, depending on the number of threads used.References: [1] X. Guan, O. Zatsarinny, K. Bartschat, B.I. Schneider, J. Feist, C.J. Noble, Phys. Rev. A 76 (2007) 053411. [2] X. Guan, C.J. Noble, O. Zatsarinny, K. Bartschat, B.I. Schneider, Phys. Rev. A 78 (2008) 053402. [3] O. Zatsarinny, Comput. Phys. Comm. 174 (2006) 273.     

Low-temperature sol-gel intermediate layer wafer bonding

Silicon-to-silicon wafer bonding has been successfully performed using sol-gel intermediate layer, which is deposited by spinning acid-catalyzed tetraethylthosilicate solution on the surfaces of two silicon wafers to be bonded. The bond strength is up to 35 MPa at a bonding temperature of 100 °C, which is near to the fractured strength of bulk silicon. To investigate the effects of the press parameters, Draper-Lin small composite design is used, as it requires the minimum number of runs in the design of experiments. Statistic analysis shows that the bonding temperature is the dominant factor for the bond quality, while the interaction between bonding temperature and concentration is significant on bond strength. The physical mechanisms of the observed significant effects are discussed. The improvement of the wafer bonding using annealed sol-gel intermediate layer is also proposed.     

Density effects on the guided transmission of 3 keV Ne ions through PET nanocapillaries

Experiments for guided transmission of 3 keV Ne⁷⁺ ions through nanocapillaries in insulating PET polymers are reported. The ion guiding was studied for a two types of PET samples which consist of 200 nm capillaries with densities of and . The width of the emission profile and the fraction of transmitted ions were measured as a function of the capillary tilt angle. For the high capillary density the profile width of the transmitted ions is independent of the tilt angle in agreement previous studies. However, for the low-density sample the profile width was found to increase by a factor of 2 as the tilt angle increases from 0° to 8°. The results for the fraction of transmitted ions are used to evaluate the guiding angle, which specifies the guiding power of the material. The guiding powers were found to be equal for the two samples. The present results are discussed in terms of scaling laws, which have recently been established.     

Thermal ionization of Cs Rydberg states

Rates P_nl of photoionization from Rydberg ns-, np-, nd-states of a valence electron in Cs, induced by black-body radiation, were calculated on the basis of the modified Fues model potential method. The numerical data were approximated with a three-term expression which reproduces in a simple analytical form the dependence of P_nl on the ambient temperature T and on the principal quantum number n. The comparison between approximate and exactly calculated values of the thermal ionization rate demonstrates the applicability of the proposed approximation for highly excited states with n from 20 to 100 in a wide temperature range of T from 100 to 10,000 K. We present coefficients of this approximation for the s-, p- and d-series of Rydberg states.     

Insight to the express transport network

The express delivery industry is developing rapidly in recent years and has attracted attention in many fields. Express shipment service requires that parcels be delivered in a limited time with a low operation cost, which requests a high level and efficient express transport network (ETN). The ETN is constructed based on the public transport networks, especially the airline network. It is similar to the airline network in some aspects, while it has its own feature. With the complex network theory, the topological properties of the ETN are analyzed deeply. We find that the ETN has the small-world property, with disassortative mixing behavior and rich club phenomenon. It also shows difference from the airline network in some features, such as edge density and average shortest path. Analysis on the corresponding distance-weighted network shows that the distance distribution displays a truncated power-law behavior. At last, an evolving model, which takes both geographical constraint and preference attachment into account, is proposed. The model shows similar properties with the empirical results.     

Development of a high intensity Al beam from SiC targets for accelerated beam experiments at ISAC

An intense beam of ^26gAl has been developed for accelerated beam experiments at TRIUMF’s ISAC facility. Studies of the on-line production of Al radionuclides from thick silicon carbide targets have been performed as part of a program of beam development for astrophysical reaction studies at ISAC. While the release of short-lived Al nuclides from SiC was found to be slow, development of new target material forms and high-power target containers has allowed operation of SiC targets with proton currents of up to 70 μA on target. In addition, operation with the TRIUMF resonant ionization laser ion source (TRILIS) has produced ^26gAl beam intensities of 5.1 × 10¹⁰ s⁻¹.