~(131)I-Lym-2单克隆抗体实验研究

不同浓度的~(131)I-Lym-2 MoAb与ARH-77和CEM细胞进行结合试验,结果表明:随浓度增大,结合值均升高;实验组裸鼠模型9只获得动力学数据。实验组和对照组注射~(131)I-Lym-2 MoAb后144h解剖,进行生物学分布(％D/g)测定,实验组肿瘤为16.88±12.64,肌肉为0.72±0.56。结果表明,~(131)I-131-Lym-2MoAb对临床B细胞淋巴瘤的放射免疫分析、显像有良好的效果。     

空气中^131I的取样和测量方法的研究

本文介绍一种气态和气载~(131)I 取样器。着重介绍了一种指数分布源的效率刻度方法,讨论了与取样有关的一些问题。     

MPC850中复位逻辑和CPM协议切换的CPLD实现

介绍了用CPLD辅助设计方法在嵌入式系统中进行MPU复杂逻辑功能设计的总体方案。给出了通过对XC5144中复用控制寄存器进行配置以实现MPU复位逻辑和CPM协议切换的实现方案和设计要点。     

^125I,^131I诱发小鼠精子畸形发生率比较

本文选用 ICR 雄性小鼠,经腹腔分别注射不同剂量的~(125)I 及~(131)I,观察并比较它们对小鼠精子畸形发生率的影响及染毒后睾丸中放射性活度的变化。实验结果表明:(1)~(125)I 染毒后4—5周,0、185、370和555 kBq 各组精子畸形发生率分别为9.00‰、9.57‰、11.6‰及13.9‰;~(131)I 染毒后4—5周,上述各组精子畸形发生率分别为8.50‰、12.5‰、14.7‰和15.5‰;在相同注入量下,~(125)I 与~(131)I 诱发小鼠精子畸形发生率的差异各组均不显著(X~2检验,p>0.05)。(2)~(125)I、~(131)I 染毒后2h 至7天内,两者在睾丸中的放射性活度及变化规律相似,即在染毒后2h 达最高值,每克睾丸中~(125)I 和~(131)I 的放射性活度分别占初始注入量(370 kBq)的0.72％和0.50％,然后迅速下降,至一周时,仅分别占初始注入量的0.035％和0.011％。     

第三代伞状喷雾的分布特性及多片喷雾系统的应用研究

为解决前两代伞状喷雾在高背压下贯穿距不足的问题,借鉴碰撞喷雾方式,提出了第三代伞状喷雾概念。通过高速摄影对喷雾的分布特性进行了研究,结果表明:喷雾具有贯穿距可设定、扩散度高、空间分布均匀等特点。为避免碰撞后二次油束雾线相互干涉,又提出了一种多片喷雾概念,并在单缸四气门135柴油机上对多片喷雾燃烧系统进行了初步的性能试验,结果显示:系统能够有效地促进缸内均质混合气的形成;在供油提前角为19°CA时,全负荷范围内柴油机的油耗和碳烟排放均较低。     

Assumptions and Consequences of Treating Providers in Therapy Studies as Fixed Versus Random Effects: Reply to Crits-Christoph, Tu, and Gallop (2003) and Serlin, Wampold, and Levin (2003).

In their comments on the authors' article (see record 2003-10163-009), R. C. Serlin, B. E. Wampold, and J. R. Levin (see record 2003-10163-011) and P. Crits-Christoph, X. Tu, and R. Gallop (see record 2003-10163-010) took issue with the authors' suggestion to evaluate therapy studies with nested providers with a fixed model approach. In this rejoinder, the authors' comment on Serlin et al's critique by showing that their arguments do not apply, are based on misconceptions about the purpose and nature of statistical inference, or are based on flawed reasoning. The authors also comment on Crits-Christoph et al's critique by showing that the proposed approach is very similar to, but less inclusive than, their own suggestion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

WINDOWS系统中高效串行通信的实现

介绍了windows环境下串行通信的核心，并以VC 为开发工具给出了I／O函数与API通信函数实现串行通信的具体编程步骤。     

Network and device-level impacts: performance and reliability of active I/O storage systems

Distributed active storage architectures are designed to offload user-level processing to the peripheral from the host servers. In this paper, we report preliminary investigation on performance and fault recovery designs, as impacted by emerging storage interconnect protocols and state-of-the-art storage devices. Empirical results obtained using validated device-level and interconnect data demonstrate the significance of the said parameters on the overall system performance and reliability.     

P–I diagram method for combined failure modes of rigid-plastic beams

Closed-form solutions of pressure-impulse (P–I) diagrams for simply supported and fully clamped rigid-plastic beams subjected to impact load are developed. Two failure categories, i.e., bending failure and shear failure, are considered and the responses of the beams are analyzed based on five transverse velocity profiles. With proper failure criteria, the critical P–I equations for bending and shear failure are derived. After the simplification of the critical P–I equations, the influences of the shear-to-bending strength ratio and the boundary conditions on the P–I diagrams are discussed. The results are compared with those based on a single-degree-of-freedom (SDOF) model. It is shown that the proposed P–I diagram method can be conveniently applied to assess beam damage extents and damage patterns. Especially, the P–I diagrams have good agreement with those based on an elastic, perfectly plastic model when severe damage occurs.     

PLC在电厂输煤系统中的应用

介绍了可编程序控制器在电厂皮带机输煤控制系统中的应用，详细说明了远程I／O控制系统的特点和功能。