橡胶Mooney—Rivlin模型材料系数对轴向刚度影响分析

在橡胶小变形范围内，采用理论推断的方法，得到在相同硬度下橡胶Mooney—Rivlin模型材料系数由C2／C1决定的关系式。并采用ABAQUS有限元软件分析的方法，结合橡胶轴向刚度常规解，分析了C2／C1不同值对橡胶轴向刚度的影响进行，结果显示其影响呈现一定规律性。     

Oxidation of oleuropein studied by EPR and spectrophotometry

The autoxidation at alkaline pH and enzymatic oxidation by mushroom tyrosinase of oleuropein, the dominant biophenol present in the fruits and leaves of Olea europea, was followed by both electron paramagnetic resonance (EPR) and absorption spectroscopy. For comparison, the same oxidation processes were applied to 4‐methylcatechol, a simple polyphenol present in olive mill wastewaters. EPR spectra of stable o‐semiquinone radicals produced during autoxidation at pH 12 and short‐lived o‐semiquinone free radicals produced during autoxidation at pH 9.0 or tyrosinase action and stabilized by chelation with a diamagnetic metal ion (Mg²⁺) were recorded for both polyphenols, and the corresponding hyperfine splitting constants were determined. The UV‐Vis spectral characteristics of the oxidation of polyphenols were highly dependent on the type of polyphenol, oxidant type and the pH of the reaction. The kinetic behavior of tyrosinase in the presence of oleuropein and 4‐methylcatechol was followed by recording spectral changes at 400 nm (absorption maximum) over time. The tysosinase activity with oleuropein showed a pronounced pH optimum at pH 6.5 and a minor one around pH 8. From the data analysis of the initial rate at pH 6.5, the kinetic parameters K_m = 0.34 ± 0.03 mM and V_max = 0.029 ± 0.002 ΔA₄₀₀ min^–1 were determined for oleuropein.     

Concomitant Crystallization of Copper(II) Sachharinato Complexes with 2-methylpyrazine as a Monomer and an One-dimensional Polymer: Syntheses,Crystal Structures,Spectroscopic and Thermal Properties

The reaction of [Cu(sac)₂(H₂O)₄] · 2H₂O with 2-methylpyrazine (mpyz) leads two complexes, concomitant crystallization of a mononuclear complex [Cu(sac)₂(mpyz)(H₂O)₂] (1) and a polymeric complex [Cu(sac)₂(μ-mpyz)]_n (2). Both complexes have been characterized by elemental analyses, magnetic measurements, FT-IR and ESR, TG-DTA and single-crystal X-ray diffraction analyses. Single-crystal X-ray analyses show that complex 1 consists of discrete molecules in which the copper(II) ions exhibits a square-pyramidal coordination geometry. The individual molecules of 1 are connected into a hydrogen-bonded chain structure, which is further assembled to form a three-dimensional network by π–π stacking interactions. Complex 2 is an 1D coordination polymer in which copper(II) centers are bridged by the mpyz ligand. The chains are further assembled to form two-dimensional frameworks by π–π and C–H···π stacking interactions.     

Direct synthesis and catalytic performance of ultralarge pore GaSBA-15 mesoporous molecular sieves with high gallium content

Mesoporous GaSBA-15 molecular sieves with different n_Si/n_Ga ratios have been directly synthesized using Pluronic 123 triblock polymer as a structure-directing agent by pH-adjusting method. The mesoporous materials have been characterized using ICP-AES, XRD, N₂ adsorption, ⁷¹Ga-MAS NMR, SEM and TEM. ICP-AES studies show a high amount of gallium incorporation on the silica pore walls. The structural and textural properties of calcined GaSBA-15 are characterized by XRD and N₂ adsorption. ⁷¹Ga MAS NMR results demonstrate that a high amount of tetrahedral-gallium could be substituted for Si in the framework of SBA-15. TEM and FE-SEM images show the uniform pore diameter and rope-like hexagonal mesoporous structure of GaSBA-15. These GaSBA-15 materials have been used as catalysts for vapour-phase t-butylation of 1,2-dihydroxybenzene (DHB) for selective synthesis of 4-t-butylcatechol (4-TBC) under different reaction conditions. GaSBA-15(10) gave the highest 93.2% conversion of DHB and 95.7% selectivity of 4-TBC as compared with other GaSBA-15 catalysts.     

Isobaric vapor–liquid equilibria for mixtures of tetrahydrofuran, 2-propanol, and 2,2,4-trimethylpentane at 101.3 kPa

Vapor–liquid equilibrium (VLE) at 101.3 kPa have been determined for a ternary system (tetrahydofuran + 2-propanol + 2,2,4-trimethylpentane) and its constituent binary systems (tetrahydrofuran + 2-propanol, tetrahydrofuran + 2,2,4-trimethylpentane, and 2-propanol + 2,2,4-trimethylpentane). The activity coefficients of liquid mixtures were calculated from the modified Raoult's law. Thermodynamic consistency tests were performed for all VLE data. The VLE data of the binary mixtures and ternary mixtures were correlated using the Margules, Wilson, NRTL, and UNIQUAC activity-coefficient models. The models with their best-fitted interaction parameters of the binary systems were used to predict the ternary vapor–liquid equilibrium. All VLE data are also used to calculate the reduced excess molar Gibbs free energy g^E/RT and the deviations in the boiling point ΔT. The calculated quantities of g^E/RT and ΔT were fitted to variable-degree polynomials in terms of liquid composition.     

Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.     

Al2O3对唐钢高炉炉渣性能的影响

针对唐钢近2年提高进口矿配比后，Al2O3含量升高对炉渣流动性带来的不利影响，对唐钢高炉的炉渣性能进行了试验研究。并结合国内同行业的生产实践经验，从理论上分析了炉渣中Al2O3及MgO的适宜含量范围，着重论述了唐钢所处冀东矿区条件下降低Al2O3的主要途径及适应高Al2O3炉渣的具体措施。     

固体超强酸S_2O_8~(2-)/SnO_2-SiO_2催化合成环己酮1,2-丙二醇缩酮

采用沉淀-浸渍法制备了固体超强酸S2O28-/SnO2-SiO2,以它为催化剂催化环己酮和1,2-丙二醇合成了环己酮1,2-丙二醇缩酮;考察了带水剂种类及用量、酮醇摩尔比、催化剂用量、反应时间对产品收率的影响,并用正交实验对反应条件进行了优化。实验结果表明,适宜的反应条件为:n(环己酮)∶n(1,2-丙二醇)=1∶1.6、催化剂用量为反应物料总质量的2.0%、带水剂环己烷用量5.0mL、反应时间50min。在此条件下,环己酮1,2-丙二醇缩酮收率达到91.47%;催化剂的稳定性良好,在重复使用5次后环己酮1,2-丙二醇缩酮收率为82.20%,活性下降的主要原因为催化剂表面积碳和吸附了有机物;经傅里叶变换红外光谱和气相色谱质谱分析表明,产物为环己酮1,2-丙二醇缩酮,纯度为100%。     

Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry