Directional neighbor discovery in 60 GHz indoor wireless networks

Signal propagation in the 60 GHz band significantly differs from that in the 2.4 and 5 GHz bands. In particular, the signals are often reflected in indoor settings in this band. Directional antennas can help limit the impact of reflection, but make the process of neighbor discovery complex. We consider this problem in this paper. We examine two approaches (a) direct discovery where each node explicitly discovers its neighbors, and (b) gossip-based discovery where nodes exchange information about their already discovered neighbors. We analyze the two approaches and validate our models via simulations. We examine the impact of system parameters such as varying beamwidth and node density.     

Improved deterministic algorithms for weighted matching and packing problems

Based on the method of (n,k)-universal sets, we present a deterministic parameterized algorithm for the weighted rd-matching problem with time complexity O^∗(4^{(r−1)k+o(k)}), improving the previous best upper bound O^∗(4^rk+o(k)). In particular, the algorithm applied to the unweighted 3d-matching problem results in a deterministic algorithm with time O^∗(16^k+o(k)), improving the previous best result O^∗(21.26^k). For the weighted r-set packing problem, we present a deterministic parameterized algorithm with time complexity O^∗(2^{(2r−1)k+o(k)}), improving the previous best result O^∗(2^2rk+o(k)). The algorithm, when applied to the unweighted 3-set packing problem, has running time O^∗(32^k+o(k)), improving the previous best result O^∗(43.62^k+o(k)). Moreover, for the weighted r-set packing and weighted rd-matching problems, we give a kernel of size O(k^r), which is the first kernelization algorithm for the problems on weighted versions.     

车门LIN网络通信程序设计

介绍了轿车车门LIN网络基本结构,LIN总线的主/从节点采用MC68HC908GZ60/MC68HC908QL4,阐明了基于ESCI/SLIC模块的LIN主/从节点软件设计流程,编写了主、从节点的LIN通信程序.实践证明,该程序运行正常、可靠,为车门控制系统顺利实现提供可靠的保障.     

钴基非晶丝应力电阻抗效应

研究了钴基非晶丝材料显示的应力电阻抗 (SI)效应。结果表明 ,淬态钴基非晶丝在其两端受到外加轴向压力作用下可呈现显著的应力电阻抗效应 ,它与驱动电流频率及幅值均有关     

Determination of Linear Attenuation Coefficients of Materials by Using Timing Method

Abstract

In this work, gamma-ray linear attenuation coefficients of aluminum (Al) and lead (Pb) materials were determined by using timing method. The used setup is different from the conventional ones. The goal of the presented setup is the fact that it is used the timing technique. The detection system is composed of a 3″ × 3″ NaI(Tl) inorganic scintillation detector and related equipment together with ¹³⁷Cs and ⁶⁰Co radioactive sources. Obtained results are in good agreement with each other.     

Fe掺杂LSCCF对中低温固体氧化物燃料电池ITSOFC短期输出性能的影响

柠檬酸盐法制备La0.7Sr0.15Ca0.15Co1-xFexO3-δ(x=0.2、0.4、0.6、0.8)阴极材料。该前驱体在900℃处理2h后,XRD证实已经形成完整的钙钛矿结构衍射峰。随Fe掺杂量增加,XRD谱图衍射峰的位置向小角度发生偏移,粉体的晶粒尺寸逐渐变大。SEM观察La0.7Sr0.15Ca0.15Co1-xFexO3-δ粉体其表面活性较高并出现了一定的团聚现象,颗粒尺寸约为5μm。以La0.7Sr0.15Ca0.15Co1-xFexO3-δ为阴极,在氢气/空气中研究了模压法制备的单电池性能,Fe掺杂量对开路电压的高低不起决定性作用,而最高功率密度随Fe掺杂量增加而降低,在650℃最高功率密度由x=0.2时的351.7mW/cm2降为x=0.8时的231.1mW/cm2。     

Texture analysis of poly-adenylated mRNA staining following global brain ischemia and reperfusion

Texture analysis provides a means to quantify complex changes in microscope images. We previously showed that cytoplasmic poly-adenylated mRNAs form mRNA granules in post-ischemic neurons and that these granules correlated with protein synthesis inhibition and hence cell death. Here we utilized the texture analysis software MaZda to quantify mRNA granules in photomicrographs of the pyramidal cell layer of rat hippocampal region CA3 around 1 h of reperfusion after 10 min of normothermic global cerebral ischemia. At 1 h reperfusion, we observed variations in the texture of mRNA granules amongst samples that were readily quantified by texture analysis. Individual sample variation was consistent with the interpretation that animal-to-animal variations in mRNA granules reflected the time-course of mRNA granule formation. We also used texture analysis to quantify the effect of cycloheximide, given either before or after brain ischemia, on mRNA granules. If administered before ischemia, cycloheximide inhibited mRNA granule formation, but if administered after ischemia did not prevent mRNA granulation, indicating mRNA granule formation is dependent on dissociation of polysomes. We conclude that texture analysis is an effective means for quantifying the complex morphological changes induced in neurons by brain ischemia and reperfusion.     

钴钇掺杂（Ba,Sr）TiO_3基介电陶瓷的制备与性能研究

采用二次固相反应法制备Ba0.7Sr0.3TiO3介电陶瓷,研究了掺杂钴、钇离子对钛酸锶钡介电性能的影响。结果表明,陶瓷样品Y3＋、Co3＋的最佳掺杂浓度分别为0.04mol%和0.05mol%,最佳烧结温度为1340℃,样品的相对介电常数为4200,介电损耗（tanδ）为0.005。样品的结构为四方晶系,P4mm空间群。获得了高介电常数、低损耗的Ba0.7Sr0.3TiO3介电陶瓷。     

奇瑞汽车成本控制模式

本文的研究对象是奇瑞汽车股份有限公司。通过对奇瑞汽车现有成本控制体系进行分析,总结奇瑞汽车成本控制的优点;并主要针对奇瑞目前在成本控制方面存在的问题,对今后成本控制体系的进一步完善和提高提出了设想和建议。     

高温高应变率下AM60B镁合金力学性能及失效行为

为了研究镁合金在高温、高应变速率下的变形行为及失效机制,采用分离式Hopkinson压杆在应变速率为1 600~4 500 s^-1、温度为27~150 ℃范围内,对真空压铸AM60B镁合金进行了动态压缩实验,并采用金相显微镜和扫描电子显微镜对压缩后的组织进行了观察.结果表明:在所测试的应变范围内,随着应变率的提高,应力-应变曲线均呈现上升趋势,且最大应变也随之增加,表现出正应变率强化效应.在150 ℃时真空压铸AM60B镁合金变形能力最好; 50 ℃时断裂强度最高.真空压铸AM60B镁合金在高温及高应变率下的断裂方式为以解理断裂为主并伴有韧性断裂的混合断裂方式.当变形温度低于150 ℃时,真空压铸AM60B镁合金在高应变率压缩下的变形机制主要是滑移.