复杂地形下自动提取多暗像元的TM影像大气纠正方法

复杂地形条件下气溶胶的空间分布变化较大,用单一的气溶胶实测参数或单一的暗像元进行大气纠正都难以获得好的效果,手动选取暗像元还受限于专业人员的经验。通过程序自动提取图像中的浓密植被像元以及位于山区阴影的植被像元作为暗像元,使得暗像元均匀分布于图像的各个区域、各个海拔,更好地模拟复杂地形下的大气状况。根据辐射传输模型,利用迭代、插值等方法获取TM1和TM3波段光学厚度,进而推算成像时刻的气溶胶波长指数及混浊度系数,从而得到各个波段的大气光学厚度以实现大气纠正。     

Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment

The corrosion behavior of 2A02 Al alloy under simulated marine atmospheric environment has been studied using mass-gain, scanning electron microscope/energy dispersive spectroscopy (SEM/EDS), laser scanning confocal microscopy, X-ray diffraction spectroscopy and localized electrochemical methods. The results demonstrate that the relationship between the corrosion induced mass-gain and the corrosion time is in accordance with the power rule. The mass-gain increases gradually during the corrosion time, while the corrosion rate decreases. With ongoing of the corrosion, corrosion products film changed from a porous to a compact structure. The various spectroscopic data show that the corrosion products films composed mainly of Al(OH)₃, Al₂O₃ and AlCl₃. The electrochemical corrosion behavior of the 2A02 Al alloy was studied by electrochemical impedance spectroscopy (EIS).     

Corrosion kinetics and patina evolution of galvanized steel in a simulated coastal-industrial atmosphere

The corrosion kinetics and patina (corrosion products) layer evolution of galvanized steel submitted to wet/dry cyclic corrosion test in a simulated coastal-industrial atmosphere was investigated. The results show that zinc coating has a greater corrosion rate during the initial period and a lower corrosion rate during the subsequent period, and the patina composition and structure can greatly affect the corrosion kinetics evolution of zinc coating. Moreover, Zn₅(OH)₆(CO₃)₂ and Zn₄(OH)₆SO₄ are identified as the main stable composition and exhibit an increasing relative amount; while Zn₁₂(OH)₁₅Cl₃(SO₄)₃ cannot stably exist and diminish in the patina layer as the corrosion develops.     

Atmospheric correction of optical imagery from MODIS and Reanalysis atmospheric products

In this paper we analyze the differences obtained in the atmospheric correction of optical imagery covering bands located in the Visible and Near Infra-Red (VNIR), Short-Wave Infra-Red (SWIR) and Themal-Infrared (TIR) spectral regions when atmospheric profiles extracted from different sources are used. In particular, three sensors were used, Compact High Resolution Imaging Spectrometer (CHRIS), Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER) and Landsat5 Thematic Mapper (TM), whereas four atmospheric profiles sources were considered: i) local soundings launched near the sensor overpass time, ii) Moderate Resolution Radiometer (MODIS) atmospheric profiles product (MOD07), iii) Atmospheric Correction Parameter Calculator (ACPC) generated by the National Center for Environmental Prediction (NCEP) and iv) Modified Atmospheric Profiles from Reanalysis Information (MAPRI), which includes data from NCEP and National Center of Atmospheric Research (NCAR) Reanalysis project but interpolated to 34 atmospheric levels and resampled to 0.5° × 0.5°. MODIS aerosol product (MOD04) was also used to extract Aerosol Optical Thickness (AOT) values at 550 nm. Analysis was performed for three test dates (12th July 2003, 18th July 2004 and 13th July 2005) over an agricultural area in Spain. Results showed that air temperature vertical profiles were similar for the four sources, whereas dew point temperature profiles showed significant differences at some particular levels. Atmospheric profiles were used as input to MODTRAN4 radiative transfer code in order to compute atmospheric parameters involved in atmospheric correction, with the aim of retrieving surface reflectances in the case of VNIR and SWIR regions, and Land Surface Temperature (LST) in the case of the TIR region. For the VNIR and SWIR region, significant differences depending on the atmospheric profile used were not found, particularly in the Visible region in which the AOT content is the main parameter involved in the atmospheric correction. In the case of TIR, differences depending on the atmospheric profile used were appreciable, since in this case the main parameter involved in the atmospheric correction is the water vapor content, which depends on the vertical profile. In terms of LST retrieval from ASTER data (2004 test case), all profiles provided satisfactory results compared to the ones obtained when using a local sounding, with errors of 0.3 K for ACPC and MAPRI cases and 0.7 K for MOD07. When retrieving LST from TM data (2005 test case), errors for MOD07 and MAPRI were 0.6 and 0.9 K respectively, whereas ACPC provided an error of 2 K. The results presented in this paper show that the different atmospheric profile sources are useful for accurate atmospheric correction when local soundings are not available. In particular, MOD07 product provides atmospheric information at the highest spatial resolution, 5 km, although its use is limited from 2000 to present, whereas MAPRI provides historical information from 1970 to present, but at lower spatial resolution.     

Estimation of net radiation from the MODIS data under all sky conditions: Southern Great Plains case study

Net radiation is a key component in the surface radiation budget. Numerous studies have developed frameworks to estimate net radiation or its components (upwelling or downwelling longwave and/or shortwave radiation) from remote sensing data for clear sky conditions. Application of existing methodologies to estimate net radiation for cloudy sky conditions from remote sensing sensors remains a significant challenge. In this paper, we present a framework to estimate instantaneous and daily average net radiation under all sky conditions from using the data from the MODerate Resolution Imaging Spectroradiometer (MODIS), onboard from the Terra satellites. Bisht et al. (2005) methodology is used for the clear sky portion of the MODIS overpass; while for cloudy portion of the MODIS overpass an extension of Bisht et al. (2005) methodology is applied. The extension of Bisht et al. (2005) methodology utilizes the MODIS cloud data product (MOD06_L2) for cloud top temperature, cloud fraction, cloud emissivity, cloud optical thickness and land surface temperature for cloudy days. The methodology is applied over the Southern Great Plains (SGP) for a time period covering all seasons of 2006. During the MODIS-Terra overpasses in 2006 over the SGP, only 24% of day-overpasses and 9% of night-overpasses had 75% or more of the study region as cloud free. Thus, this proposed study is applicable to a large portion of the MODIS-Terra overpasses. The root mean square errors (RMSE) of instantaneous and daily average net radiation estimated under cloudy conditions using the MOD06_L2 product, comparing to ground-based measurements are 37 W m^− 2 and 38 W m^− 2, respectively. The strength of the proposed methodology is that it can rely exclusively on remote sensing data in the absence of ancillary ground observations, thus it has a potential to estimate surface energy budget globally.     

Improving the SMAC atmospheric correction code by analysis of Meteosat Second Generation NDVI and surface reflectance data

In order to obtain high quality data, the correction of atmospheric perturbations acting upon land surface reflectance measurements recorded by a space-based sensor is an important topic within remote sensing. For many years the Second Simulation of the Satellite Signal in the Solar Spectrum (6S) radiative transfer model and the Simplified Method for Atmospheric Correction (SMAC) codes have been used for this atmospheric correction, but previous studies have shown that in a number of situations the quality of correction provided by the SMAC is low. This paper describes a method designed to improve the quality of the SMAC atmospheric correction algorithm through a slight increase in its computational complexity. Data gathered from the SEVIRI aboard Meteosat Second Generation (MSG) is used to validate the additions to SMAC, both by comparison to simulated data corrected using the highly accurate 6S method and by comparison to in-situ and 6S corrected SEVIRI data gathered for two field sites in Africa. The additions to the SMAC are found to greatly increase the quality of atmospheric correction performed, as well as broaden the range of atmospheric conditions under which the SMAC can be applied. When examining the Normalised Difference Vegetation Index (NDVI), the relative difference between SMAC and in-situ values decreases by 1.5% with the improvements in place. Similarly, the mean relative difference between SMAC and 6S reflectance values decreases by a mean of 13, 14.5 and 8.5% for Channels 1, 2 and 3 respectively. Furthermore, the processing speed of the SMAC is found to remain largely unaffected, with only a small increase in the time taken to process a full SEVIRI scene. Whilst the method described within this paper is only applicable to SEVIRI data, a similar approach can be applied to other data sources than SEVIRI, and should result in a similar accuracy improvement no matter which instrument supplies the original data.     

Switching model predictive attitude control for a quadrotor helicopter subject to atmospheric disturbances

In this article a switching model predictive attitude controller for an unmanned quadrotor helicopter subject to atmospheric disturbances is presented. The proposed control scheme is computed based on a piecewise affine (PWA) model of the quadrotor's attitude dynamics, where the effects of the atmospheric turbulence are taken into consideration as additive disturbances. The switchings among the PWA models are ruled by the rate of the rotation angles and for each PWA system a corresponding model predictive controller is computed. The suggested algorithm is verified in experimental studies in the execution of sudden maneuvers subject to forcible wind disturbances. The quadrotor rejects the induced wind disturbances while performing accurate attitude tracking.     

An assessment of photosynthetic light use efficiency from space: Modeling the atmospheric and directional impacts on PRI reflectance

Estimation of photosynthetic light use efficiency (ε) from satellite observations is an important component of climate change research. The photochemical reflectance index, a narrow waveband index based on the reflectance at 531 and 570 nm, allows sampling of the photosynthetic activity of leaves; upscaling of these measurements to landscape and global scales, however, remains challenging. Only a few studies have used spaceborne observations of PRI so far, and research has largely focused on the MODIS sensor. Its daily global coverage and the capacity to detect a narrow reflectance band at 531 nm make it the best available choice for sensing ε from space. Previous results however, have identified a number of key issues with MODIS-based observations of PRI. First, the differences between the footprint of eddy covariance (EC) measurements and the MODIS footprint, which is determined by the sensor's observation geometry make a direct comparison between both data sources challenging and second, the PRI reflectance bands are affected by atmospheric scattering effects confounding the existing physiological signal. In this study we introduce a new approach for upscaling EC based ε measurements to MODIS. First, EC-measured ε values were “translated” into a tower-level optical PRI signal using AMSPEC, an automated multi-angular, tower-based spectroradiometer instrument. AMSPEC enabled us to adjust tower-measured PRI values to the individual viewing geometry of each MODIS overpass. Second, MODIS data were atmospherically corrected using a Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm, which uses a time series approach and an image-based rather than pixel-based processing for simultaneous retrievals of atmospheric aerosol and surface bidirectional reflectance (BRDF). Using this approach, we found a strong relationship between tower-based and spaceborne reflectance measurements (r² = 0.74, p < 0.01) throughout the vegetation period of 2006. Swath (non-gridded) observations yielded stronger correlations than gridded data (r² = 0.58, p < 0.01) both of which included forward and backscatter observations. Spaceborne PRI values were strongly related to canopy shadow fractions and varied with different levels of ε. We conclude that MAIAC-corrected MODIS observations were able to track the site-level physiological changes from space throughout the observation period.     

Utility of an image-based canopy reflectance modeling tool for remote estimation of LAI and leaf chlorophyll content at the field scale

This paper presents a physically-based approach for estimating critical variables describing land surface vegetation canopies, relying on remotely sensed data that can be acquired from operational satellite sensors. The REGularized canopy reFLECtance (REGFLEC) modeling tool couples leaf optics (PROSPECT), canopy reflectance (ACRM), and atmospheric radiative transfer (6SV1) model components, facilitating the direct use of at-sensor radiances in green, red and near-infrared wavelengths for the inverse retrieval of leaf chlorophyll content (C_ab) and total one-sided leaf area per unit ground area (LAI). The inversion of the canopy reflectance model is constrained by assuming limited variability of leaf structure, vegetation clumping, and leaf inclination angle within a given crop field and by exploiting the added radiometric information content of pixels belonging to the same field. A look-up-table with a suite of pre-computed spectral reflectance relationships, each a function of canopy characteristics, soil background effects and external conditions, is accessed for fast pixel-wise biophysical parameter retrievals. Using 1 m resolution aircraft and 10 m resolution SPOT-5 imagery, REGFLEC effectuated robust biophysical parameter retrievals for a corn field characterized by a wide range in leaf chlorophyll levels and intermixed green and senescent leaf material. Validation against in-situ observations yielded relative root-mean-square deviations (RMSD) on the order of 10% for the 1 m resolution LAI (RMSD = 0.25) and C_ab (RMSD = 4.4 μg cm^− 2) estimates, due in part to an efficient correction for background influences. LAI and C_ab retrieval accuracies at the SPOT 10 m resolution were characterized by relative RMSDs of 13% (0.3) and 17% (7.1 μg cm^− 2), respectively, and the overall intra-field pattern in LAI and C_ab was well established at this resolution. The developed method has utility in agricultural fields characterized by widely varying distributions of model variables and holds promise as a valuable operational tool for precision crop management. Work is currently in progress to extend REGFLEC to regional scales.     

不同大气校正方法对中小湖泊蓝藻遥感动态监测的影响

环境小卫星可实现中小湖泊蓝藻动态监测,但不同大气校正方法对于相同影像的处理结果有很大差异。研究利用多种大气校正方法对环境小卫星影像进行辐射校正处理,利用多个感兴趣区的全局和局部特征以及多个统计量对处理结果进行分析,比较其在蓝藻动态监测中的作用。基于多光谱植被指数计算蓝藻生物量的思路,分析了影像经不同大气校正算法处理后,其归一化植被指数的差异性来源及其对蓝藻生物量计算结果的影响。结果表明:蓝藻动态监测的定量描述会因大气校正算法不同而不一致,进而对几种大气校正算法在蓝藻生物量监测和定量分析中所产生的不确定性进行了比较分析,并对各算法的有效利用提出了建议。