信息化进程中计算机硬件学科建设的持续自主创新

目前,我国的信息产业也在不断的飞速发展,而信息化发展的进程中,计算机硬件学科也加入了其发展的行列,并长期以来一直坚持着可持续发展的自主创新理念。本文首先介绍了信息化的发展进程,接着分析了计算机硬件学科的建设的自主创新的坚持的主要原则,最后明确的阐述了计算机硬件学科,在建设的持续自主创新中采取的有利措施。     

水平连铸带坯QSn6.5-0.1的组织与性能

讨论了锡磷青铜QSn6.5-0.1水平连铸带坯的宏观组织特点、反偏析行为和显微缩孔。结果表明：横断面以柱状晶为主，结晶中心线普遍上移，大面出现结晶角，上下表面和侧边出现反偏析，紧临偏析区出现低Sn区，显微缩松是主要组织缺陷．是冷加工报废的主要原因，同时通过热处理试验，分析了热处理规范对锭坯性能及组织的影响，并制订出合理的热处理规范。     

弧形连铸机结晶器四连杆机构振动误差计算

分析了DANIELI连铸机结晶器四连杆振动装置的结构型式，并在文献[1]的基础上建立了适合该振动装置振动误差计算的数学模型，并用FORTRAN语言编制了计算程序，验证计算表明该数学模型准确适用。     

控制连铸板坯星状裂纹的对策

回顾重钢七厂连铸板坯星状裂纹导致轧制钢板表面产生龟裂缺陷、以及对钢坯产生星裂的机理的认识过程,借助国外在这方面的研究成果进行对比分析,认为控制板坯星裂的最重要技术措施是采用"结晶器软冷却”工艺、以及控制钢的铁素体势和铜当量。     

超低硫X65管线钢中非金属夹杂物研究

对本钢超低硫X65管线钢中夹杂物的研究结果表明,LF精炼初期,钢中夹杂物主要是球形、多边形和大量簇状的Al2O3夹杂物,99.1%的夹杂物尺寸小于20μm。微合金化后,部分Al2O3夹杂物中出现TiO、SiO2、MnS等成分。钙处理后,夹杂物的平均直径达到8.58μm,大量夹杂物为含有微量MgO、SiO2或MnS等的2~50μm的球形mCaO.nAl2O3,部分为Al2O3、MnS、CaS或CaS-MnS。铸坯中夹杂物数量最少且尺寸最小,96.9%的夹杂物尺寸小于10μm,未发现大于50μm的夹杂物,平均直径为3.71μm。铸坯中大部分为球形的以mCaO.nAl2O3为主要成分的复合夹杂物,还有少量的Al2O3、MnS和CaS夹杂物等。     

Balanced multiple weighted linear discriminant analysis and its application to visual process monitoring

Visual process monitoring is important in complex chemical processes. To address the high state separation of industrial data, we propose a new criterion for feature extraction called balanced multiple weighted linear discriminant analysis(BMWLDA). Then, we combine BMWLDA with self-organizing map(SOM) for visual monitoring of industrial operation processes. BMWLDA can extract the discriminative feature vectors from the original industrial data and maximally separate industrial operation states in the space spanned by these discriminative feature vectors. When the discriminative feature vectors are used as the input to SOM, the training result of SOM can differentiate industrial operation states clearly.This function improves the performance of visual monitoring. Continuous stirred tank reactor is used to verify that the class separation performance of BMWLDA is more effective than that of traditional linear discriminant analysis, approximate pairwise accuracy criterion, max–min distance analysis, maximum margin criterion, and local Fisher discriminant analysis. In addition, the method that combines BMWLDA with SOM can effectively perform visual process monitoring in real time.     

赣西浒坑钨矿床成矿岩体的磷灰石和锆石微量元素特征及其对成岩成矿的指示

赣西地区浒坑钨矿是我国华南钨、锡、铜多金属成矿区与中生代岩浆活动密切相关的典型矿床之一。对浒坑钨矿床中与成矿有关的白云母花岗岩开展了锆石U-Pb定年、磷灰石和锆石原位微量元素研究,结果表明：赋矿白云母花岗岩的成岩时代为（152.3±1.73）Ma;磷灰石具有特殊的“M”型REE球粒陨石标准化配分模式,富F和Mn,贫Cl和Mg;锆石具有高Th/U比值,REE球粒陨石标准化配分模式亏损LREE、富集HREE。锆石微量元素（Ce、U和Ti）温度计和氧逸度计结果表明,锆石形成于岩浆早期高温（800 ℃）和低氧逸度条件下。研究认为,浒坑赋矿花岗岩在演化初期经历了强烈的矿物结晶分异,矿床的形成可能与还原性高分异岩浆演化相关。     

圆坯连铸GCr15SiMn的成分偏析和接触疲劳寿命研究

利用金属原位分析技术和钻孔化学分析方法对高淬透性轴承钢GCr15SiMn的Φ450 mm连铸圆坯和Φ130 mm圆钢的C、Si、Mn、Cr元素横截面的分布情况进行分析。采用推力片式接触疲劳试验机进行了材料的接触疲劳寿命测试。结果表明：GCr15SiMn连铸圆坯C元素的偏析倾向较大,易产生中心正偏析,而Cr、Si、Mn元素的偏析倾向较小。通过采取稳定低过热度浇铸、三段强电磁搅拌等措施,铸坯的中心碳偏析得以改善。采用(1240±20)℃×5 h高温扩散、初轧首道次变形量≥90 mm大变形轧制的Φ130 mm圆钢的碳偏析可以得到进一步的改善,试验钢在5.3GPa高应力负载下的接触疲劳额定寿命L₁₀达到3.58×10⁶次,接近电渣重熔钢的水平。     

Quantification of trace amounts of impurities in high purity cobalt by high resolution inductively coupled plasma mass spectrometry

An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 24 elements (Be, Mg, Al, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pt, Au, and Pb) in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCl. The matrix effects because of the presence of excess HCl and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the deter- mination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits were 0.016-1.50 μg?g?1, the recovery ratios were 92.2%-111.2%, and the RSD was less than 3.6%. The method was accurate, quick, and convenient. It was applied to the determination of trace impurities in high purity cobalt with satisfactory results.     

宝钢1930板坯连铸异钢种连浇的水模实验研究

对宝钢连铸一分厂60t中间包进行了1：3水模实验，主要研究非稳态条件下拉速、余钢量对不同钢种连浇时交接部长度的影响，以利于改进现场的操作。