燃气加热托辊型网带炉生产线的研制与应用

介绍了燃气加热托辊型网带炉生产线的组成、燃气脉冲控制和空气/燃气比例连续调节技术和计算机多媒体集散控制系统.生产应用表明炉温均匀性良好,处理产品质量稳定,能耗成本降低,取得了明显的经济效益.     

一种检测电火花加工间隙状态的柔性方法

介绍了一种在数控电火花加工脉冲电源中实现间隙状态检测的柔性方法，具有阈值设置柔性、状态识别准确的特点，巧妙地用一个稳压二极管的钳位作用提高了间隙状态识别的精度，非常适合需经常改变加工参数的加工实验使用。     

小截面送料双频电磁成形的试验研究

研究了金属熔体的小截面送料双频电磁成形过程。结果表明：屏蔽罩能够调节成形感应圈内的磁场分布，使成形感应圈内的熔体处于合理状态；两感应圈间必须保持一定距离，使预热感应圈的磁场不影响成形感应圈的磁场分布，利于成形稳定；在其他条件一定的情况下，有一适合的抽拉速度和电源功率匹配；并获得了表面质量良好的耐热不锈钢样件。     

4-methoxy-2,6-bis(3,5-dimethylpyrazoyl)-1,3,5-triazine modified carbon paste electrode for trace Cu(Ⅱ) determination by differential pulse volt-ammetry

A differential pulse voltammetric method was developed for the sensitive and selective determination of Cu(Ⅱ) at 4-methoxy-2,6-bis(3,5-dimethylpyrazoyl)-l,3,5-triazine modified carbon paste electrode in 0.05 mol/L KHC8H4O4 solution (pH = 4.02). The oxidation peak of Cu(Ⅱ) was observed at 0.065 V(vs Ag/AgCl) by scanning the potential in positive direc-tion. The analysis procedure consisted of an open circuit accumulation step in stirred sample solution. It was followed by medium exchange to a clean solution and subsequently an anodic potential scan was affected to obtain the voltammetric peak. The current was proportional to the concentration of the Cu(Ⅱ) ion in a range of 1× 10-7-1×10-4 mol/L for 6 min accumulation; the most of metal ions did not interfere with the determination. The developed method was applied to Cu(Ⅱ) determination in coal-ash sample, the results agreed with that of atomic adsorption spectroscopy(AAS).     

差分脉冲极谱法测定苯胺中微量硝基苯

建立了测定苯胺中微量硝基苯的差式微分脉冲极谱法。试验发现硝基苯在-0.57V(vs.Ag/AgCl)处有一个良好的差分脉冲极谱峰。硝基苯质量浓度在1～600μg/mL的范围内,质量浓度与差分脉冲极谱峰的峰高呈线性关系。此法简便、快速、灵敏,结果准确。     

印制线路板微孔镀铜研究现状

印制线路板微孔金属化的关键在于在高厚径比的微孔中形成无空洞、无接缝、均匀的铜沉积层.综述了目前微孔填充技术的发展现状,对电镀过程中采用的电流密度、搅拌因素和电流波形等进行了探讨,重点讨论了添加剂对填孔效果的影响及其作用机理.     

羧基化高纯单壁碳纳米管修饰电极对乙酰甲喹的高灵敏检测

采用羧基化高纯单壁碳纳米管(c SWCNTs)固载于金电极表面来构筑乙酰甲喹电化学传感器。运用循环伏安法(CV)、差分脉冲伏安法(DPV)和电化学交流阻抗法(EIS)测定传感器的性能。结果显示,该传感器对乙酰甲喹的电化学还原具有显著的催化性能,修饰电极的峰电流达到-128.40μA,是裸电极峰电流的1167倍。通过对传感器性能影响因素的考察,得到最优制备条件为cSWCNTs涂覆量为4μL(质量分数0.10%分散液),搅拌速度1000 r/min,pH=7.0的PBS浓度为0.2 mol/L,-0.5V电压下富集30 min。在该条件下制备的传感器峰电流与乙酰甲喹在1～500nmol/L范围内呈良好的线性关系,相关系数为0.998,方法的检出限为0.76nmol/L。该传感器被成功地应用于实际样品检测,加标回收率在81.7%～124.0%。     

卡尔曼滤波在核脉冲全谱数据采集系统中的应用

针对核脉冲全谱数据采集技术中采用的深度加权滤波法在数据量少时平滑效果差、滞后大的缺点,设计了卡尔曼滤波算法替代传统滤波算法进行解谱的方案。滤波算法首先根据信号与噪声的状态空间模型,建立状态方程和测量方程,然后根据广义卡尔曼滤波对测量方程进行更新,最后根据现场的标准刻度井测量数据确定测量矩阵,对测量数据进行滤波。实测结果表明,该滤波算法相对于传统滤波算法,能够消除谱图的统计涨落,提高光滑度,遏制滞后,并保证滤波后曲线不失真。     

Competitive removal of Pb2+, Cd2+, and Zn2+ by poly(acrylamide‐co‐maleic acid) hydrogels/differential pulse polarographic determination

Poly(acrylamide‐co‐maleic acid) [P(AAm/MA)] hydrogels, with various compositions, were prepared from ternary mixtures of acrylamide (AAm)/maleic acid (MA)/water by using ⁶⁰Co γ‐rays. The effect of composition of these hydrogels, on the competitive removal of Pb²⁺, Cd²⁺, and Zn²⁺ ions from aqueous solution, was investigated. The hydrogel compositions and their adsorption behaviors were determined by use of differential pulse polarography, a very sensitive electroanalytical technique. It was observed that the external stimuli of pH, temperature, and ionic strength have an important role on the adsorption. The increments of MA content in P(AAm/MA) hydrogels caused a significant increase in the adsorption these ions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2401–2406, 2004     

物联网技术在科研量化管理平台中的应用及探索

科研管理的现代化及高效化是社会发展的趋势,将物联网技术集成到科研管理平台中,能达到高效、科学、高效的效果。完善当前科研管理系统的功能,使得平台除基本的管理功能外,同时具备量化积分功能及论文共享机制等功能,为考核、评价及后续工作提供参考数据,适应当前形势下的复杂需求。