Changes in membrane fatty acids and murein composition of Bacillus cereus and Salmonella Typhi induced by gamma irradiation treatment

This present study was carried out to evaluate the effects of gamma irradiation on the fatty acids (FA) and mureins composition of two different radiotolerant bacteria. Bacillus cereus LSPQ 2872 and Salmonella Typhi ATCC 19430 were used for this study. The bacterial strains were treated with a sublethal radiation dose of 1 kGy to cause a cellular damage. Gas chromatography (GC) and high performance liquid chromatography (HPLC) analysis were performed to demonstrate respectively the modification of the FA composition and the changes in muropeptide profile. Results obtained show, for both bacteria, that this treatment had a significant effect (P ≤ 0.05) on the FA content with an increase of unsaturated FA percentage. Substantial changes were also noticed for the relative percentage and the number of the muropeptides. This study represents one of the few to demonstrate the modifications on bacterial membrane as a cellular response to survive the ionising radiation stress.     

Free-running ADC- and FPGA-based signal processing method for brain PET using GAPD arrays

Currently, for most photomultiplier tube (PMT)-based PET systems, constant fraction discriminators (CFD) and time to digital converters (TDC) have been employed to detect gamma ray signal arrival time, whereas anger logic circuits and peak detection analog-to-digital converters (ADCs) have been implemented to acquire position and energy information of detected events. As compared to PMT the Geiger-mode avalanche photodiodes (GAPDs) have a variety of advantages, such as compactness, low bias voltage requirement and MRI compatibility. Furthermore, the individual read-out method using a GAPD array coupled 1:1 with an array scintillator can provide better image uniformity than can be achieved using PMT and anger logic circuits. Recently, a brain PET using 72 GAPD arrays (4×4 array, pixel size: 3 mm×3 mm) coupled 1:1 with LYSO scintillators (4×4 array, pixel size: 3 mm×3 mm×20 mm) has been developed for simultaneous PET/MRI imaging in our laboratory. Eighteen 64:1 position decoder circuits (PDCs) were used to reduce GAPD channel number and three off-the-shelf free-running ADC and field programmable gate array (FPGA) combined data acquisition (DAQ) cards were used for data acquisition and processing. In this study, a free-running ADC- and FPGA-based signal processing method was developed for the detection of gamma ray signal arrival time, energy and position information all together for each GAPD channel. For the method developed herein, three DAQ cards continuously acquired 18 channels of pre-amplified analog gamma ray signals and 108-bit digital addresses from 18 PDCs. In the FPGA, the digitized gamma ray pulses and digital addresses were processed to generate data packages containing pulse arrival time, baseline value, energy value and GAPD channel ID. Finally, these data packages were saved to a 128 Mbyte on-board synchronous dynamic random access memory (SDRAM) and then transferred to a host computer for coincidence sorting and image reconstruction. In order to evaluate the functionality of the developed signal processing method, energy and timing resolutions for brain PET were measured via the placement of a 6 μCi ²²Na point source at the center of the PET scanner. Furthermore the PET image of the hot rod phantom (rod diameter: from 2.5 mm to 6.5 mm) with activity of 1 mCi was simulated, and then image acquisition experiment was performed using the brain PET. Measured average energy resolution for 1152 GAPD channels and system timing resolution were 19.5% (FWHM%) and 2.7 ns (FWHM), respectively. With regard to the acquisition of the hot rod phantom image, rods could be resolved down to a diameter of 2.5 mm, which was similar to simulated results. The experimental results demonstrated that the signal processing method developed herein was successfully implemented for brain PET. This reduced the complexity, cost and developing duration for PET system relative to normal PET electronics, and it will obviously be useful for the development of high-performance investigational PET systems.     

Gamma rays interactions with WO3-doped lead borate glasses

Optical and FT infrared spectral properties of tungsten ions in a host lead borate glass with composition PbO 55%, B₂O₃ 45% (wt%) were studied. The same spectral properties were re-measured after subjecting the samples to successive gamma irradiation. The work was undertaken to justify the state of tungsten ions in such glass system by combined spectral investigations. Optical and FTIR spectral studies were confirmed by investigating electron spin resonance (ESR) of the undoped and WO₃-doped samples before and after gamma irradiation. The optical spectrum of the undoped glass exhibits strong and wide UV absorption bands, which are related to the combined UV spectra of trace iron impurities (Fe³⁺ ions) and that from divalent lead (Pb²⁺) ions. Optical studies of WO₃-doped sample indicate the presence of tungsten ions mostly in the hexavalent W⁶⁺ state. The presence of tungsten ions as structural groups was obtained by comparing the FTIR spectra of the undoped and WO₃-doped samples. ESR spectra confirm the optical and FTIR spectral studies. The studied host lead borate glass has been found to show obvious shielding behavior towards successive gamma irradiation as revealed by the constancy of optical absorption spectral curves.     

主动式有机发光显示器的伽马校正(英文)

针对平板显示器在光电转换过程中出现的非线性关系,视频图像在处理过程中引入了伽马校正。本文提出了一种关于0.5英寸主动式有机发光显示器SVGA050D的伽马校正方法。该方法根据查找表的对应关系,采用PIC单片机作为主控芯片,通过串行总线通信配置显示器和解码芯片等内部寄存器生成查找表的方式,实现了输入为VGA或复合视频信号的伽马校正。经实验验证,校正功能得到了有效的实现,视频图像的质量明显改进。     

Effects of cutting angle,edge preparation,and nano-structured coating on milling performance of a gamma titanium aluminide

Gamma titanium aluminides are intermetallic alloys. Recently, they have been evaluated as important contenders for structural applications in the automotive and aerospace sectors. This is due to their excellent high-temperature performances and their significantly lower density compared to nickel-based superalloys. In this paper, an analysis of machinability of a gamma TiAl obtained via an electron beam melting (EBM) process is presented. The effects of tool geometry modifications, in terms of cutting tool angles and cutting edge preparation, were investigated. The reduction of radial rake angle and the drag finishing process for cutting edge preparation resulted in an increase of the tool life of the carbide end mills. Nanogradient tool coatings were also observed to affect tool wear during milling tests, and the results highlight that AlSiTiN coating performs better compared to CrAlSiN coating. A post-coating polishing treatment was also taken into account, and it allowed a further reduction of tool wear. The overall results indicate that the machinability of this difficult-to-cut material can be significantly improved by an adjustment of the cutting edge geometry, and by using an AlSiTiN coating system.     

Non destructive determination of PuO2 content in MOX fuel pins for fast reactors using Passive Gamma Scanning

Use of Passive Gamma Scanning for non destructive evaluation of PuO₂ content in mixed oxide (MOX) fuels for fast reactors is demonstrated. Experiments have been carried out on MOX fuel pins for the hybrid core of Fast Breeder Test Reactor having nominal PuO₂ content of 44% and MOX pins having nominal PuO₂ content of 21% for the Prototype Fast Breeder Reactor. A comparison of results obtained using a conventional NaI(Tl) detector and that using a through well shaped detector is also presented.     

Changes in wheat and potato starches induced by gamma irradiation: A comparative macro and microscopic study

Wheat and potato starches were treated by gamma irradiation (0, 3, 5, 10, 20, 35, and 50 kGy). Apparent amylose content, gelatinization maximum consistency, swelling power, viscosity, and textural parameters decreased in potato and wheat starch pastes as irradiation dose increased. Nevertheless, the decrease of apparent amylose content and swelling power was greater in potato starch than in wheat one. High gamma irradiation doses made potato starch granules more sensitive to shear. On the other hand, no modification in the granule shape was observed by scanning electron microscopy. However, through heat-treatment, starch granules destroyed as irradiation dose increased. Consequently, the effect of irradiation on granular structure appeared to be greater in potato starch than in wheat starch.     

蒙特卡罗模拟确定γ射线衰减系数函数及参数

在中低密度样品中,γ射线的线衰减系数主要由γ射线能量和样品密度决定,采用MCNP(Monte Carlo N Particle Transport Code)程序模拟计算了多种γ射线能量和多种样品密度条件下的线衰减系数,对线衰减系数模拟值进行多元非线性回归,确定了以γ射线能量和样品密度为因变量的线衰减系数函数及参数。实验测定了三种能量γ射线在6种不同密度样品中的线衰减系数值,并与模拟所得函数值进行比较分析。结果表明,所得函数值与实验值的相对误差均在7%以内,蒙特卡罗程序计算所得函数值与实验测量值较为吻合,所采用的函数模型准确验证了线衰减系数与γ射线能量、样品密度之间的关系特征。     

Calcium Pectinate Capsules for Colon-Specific Drug Delivery

The calcium pectinate (CaP) capsule, a novel, colon-specific delivery system, was designed and developed using 5-fluorouracil (5-FU) as a model drug. Technically, CaP capsules were prepared by dipping a glass or stainless steel rod successively into pectin and calcium chloride solutions, followed by subsequent air-drying and coating. In vitro studies showed that the release of 5-FU from CaP capsules markedly increased in the presence of rat cecal contents, and the release characteristic was mainly associated with some capsule parameters such as calcium content, shell thickness, and coat amount. Gamma scintigraphic studies demonstrated that CaP capsules could pass through the stomach and small intestine intact and could release drug in colon. The 5-FU releasing characteristics acquired both from in vitro biomimic dissolution experiments and from healthy volunteers indicated that the newly developed CaP capsule possessed the ideal colon-specific drug delivery characteristic.     

Modified gamma correction method to enhance ball grid array image for surface defect inspection

BGA (Ball Grid Array) surface defect detection requires faster and more accurate methods for semiconductor industry applications. Traditionally, the BGA inspection used gray-scale images. However, the solder pad, wiring and gray scales shown in images depict little variance. Therefore, when the threshold value is poorly set or the contract rate is insignificant, BGA detection may fail to segment an object. This research proposes a modified methodology that uses Gamma correction for image enhancement. Three-color bands were applied to a modified Gamma correction algorithm (i.e. RGB) to better separate the high and low image contrasts. Better results were obtained by dividing the image into background and foreground portions using the Gamma correction. As a result, the proposed method improved the contrast value by 52.09%. After the images were enhanced and segmented, the compactness and internal holes were calculated as features for classification. The results showed that classification correctness was 96.43%. The proposed method used a 640?×?480 pixel image, performing complete defect detection 0.3 seconds faster than the traditional enhancement method, which requires 1?second. The research results provide an effective solution for the detection and classification of the BGA surface tin ball defect problem.