A voltammetric study concerning the structural stability of Li-overstoichiometric Mg-doped LiCoO2 powders

The effect of Mg-doping and Li overstoichiometry on the structural stability of LiCoO₂ powders has been investigated with emphasis to voltammetric properties. Microparticle cyclic voltammetry (CV) conducted in caustic NaOH to best simulate a non-aqueous electrolyte shows a marked improvement of the structure stability of doped LiCoO₂. In contrast to the unsubstituted LiCoO₂ sample which shows voltammetric peaks associated to the well-known two-phase domain and monoclinic distortion reactions, in Li_1.08Mg_0.06CoO₂, LiMg_0.06CoO₂ and Li_1.08CoO₂ samples these peaks are strongly suppressed providing direct evidence for the existence of a stable solid solution with negligible phase transitions in the reversible intercalation region (3.8-4.2 V vs. Li) as well as in the overcharged region. The effect is higher with Mg-doping, irrespective of the Li overstoichiometry. However, the concomitant presence of Mg and Li excess in the structure is important for obtaining small particle sizes. Since Mg-doping induces a quasi metallic behavior in the samples, whereas the Li excess may provide an higher initial capacity, it is suggested that the Li_1.08Mg_0.06CoO₂ composition may be of interest as positive cathode for advanced Li-ion batteries.     

Chemical and Physical Signals Mediating Conspecific and Heterospecific Aggregation Behavior of First Instar Stink Bugs

We investigated cues that mediate the aggregation behavior of immature pentatomid bugs by using nymphs of six different pentatomid bug species (Nezara viridula, Acrosternum hilare, Chlorochroa ligata, Chlorochroa sayi, Thyanta pallidovirens, and Euschistus conspersus). When first instars of any two species were put together in a Petri dish, they readily formed heterospecific aggregations similar to their natural conspecific aggregations. The chemical profiles of first and second instar nymphs of each species were determined by solvent extraction with pentane, followed by GC-MS analysis. Immature bugs of the different species had some compounds in common, and some that were more species specific. Within a species, there were distinct differences in the profiles of compounds extracted from first and second instars. Bugs did not aggregate around untreated polysulfone beads (1 mm diam) that were glued together in groups approximating bug egg masses, suggesting that tactile cues alone were insufficient to induce aggregation. Furthermore, when tested over a range of doses, groups of polysulfone beads treated with crude whole-body extracts of bugs did not induce or maintain aggregations. However, first instar N. viridula nymphs did respond to beads treated with two of the three major components of bug extracts. 4-Oxo-(E)-2-decenal induced significant aggregations at two doses, whereas tridecane, the major component in extracts from all six species, did not, and (E)-2-decenal was repellent. The repellence of (E)-2-decenal may explain why we and previous researchers were unable to induce aggregations of first instar N. viridula using whole-body extracts.     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

Possible Energy Network with polygeneration system and CCS for China

On basis of adopting polygeneration systems for power and alternative fuels,capturing CO2 with near zero energy penalties,and storing CO2 on sites,a new kind of Energy Network can integrate energy utilization,CO2 capture,transportation and storage synthetically.Techno-economic analysis of this solution focusing on Inner Mongolia and the Yangtze River Delta districts had been carried with comparison to the chain method for energy utilization and CO2 sequestration.This solution can save 21.5% of energy,and re...     

光谱法研究Ni[S2P（OCH2CH2Ph）2]2与α,α＇-联吡啶加合反应

利用紫外光谱法研究了Ni[S2P（OCH2CH2Ph）2]2与α,α-联吡啶的加合反应。研究发现Ni[S2P（OCH2CH2Ph）2]2与α,α-联吡啶形成1∶1型加合物,在25℃的苯溶剂中,加合物的离解度α=0.07,稳定常数K稳^θ=2.1×10^6。     

Investigation on the electrocatalytic characteristics of SnO_2 electrodes with nanocoating prepared by electrodeposition method

SnO2 electrodes have many advantages in the degradation of toxic or bio-refractory organic wastewater,and SnO2 is a kind of anode material which has the potential to be widely used.Electrocatalytic effi-ciency and service life of Ti\SnO2 electrodes are key factors that can influence its applications.In order to enhance the electrocatalytic characteristics of Ti\SnO2 electrodes,a type of electrocatalytic electrode with nanocoating was prepared by direct current(DC)electrodeposition method and thermal oxidati...     

CuO-NiO/Al_20_2催化剂上N-甲基哌嗪合成研究

以共沉淀法制备铜、铝系复合氧化物作为催化剂,二乙醇胺和甲胺为原料,合成了N-甲基哌嗪.利用高压反应釜对其进行活性评价,发现CuO-NiO/Al2O3活性最高.并对铜、铝、镍摩尔比、沉淀剂种类、沉淀方式,焙烧温度等条件进行了优化.结果表明:催化剂中理想的Cu、Al、Ni摩尔比为1:1:3.2,沉淀剂为氢氧化钠,沉淀方式为并流,焙烧温度为500℃.该条件下N-甲基哌嗪的选择性为27.7%,二乙醇胺的转化率达89.8%.另外通过对使用前后催化剂进行表征分析发现催化剂失活原因为表面高聚物的附着和对孔道的堵塞.     

Study of the physico–chemical characteristics and rheological behaviour of boehmite dispersions for dip-coating applications

Dispersions of a totally dispersible AlOOH powder have been studied. The effect of the initial composition has been studied to outline the reactions that determine the final rheological behaviour of the dispersions. The final viscosity and viscoelastic properties of the dispersions are determined by the sol–gel phenomena occurring during the ageing treatment. Gel formation is favoured by low water and high acid contents, while it is disfavoured by prolonged stirring. Gelling time from 48 h to 4 months has been observed depending on the initial composition.