MHD mixed convection flow along a vertically heated sheet

Main objective of this frame work is to establish the modeling and simulation of mix convection flow along a vertically heated sheet filled with water. Two important mechanisms: magneto-hydrodynamics and porous medium are also considered within the restricted domain of the fluid flow. Temperature is controlled with the wall temperature and then mathematical model is constructed in the form of PDEs. To determine the similarity solution results are obtained via two different techniques. Numerically solutions are obtained with the help of shooting technique and then validate with the help of optimal homotopy analysis method (OHAM). Obtained analytical and numerical results are validated graphically. Effect of emerging parameters are plotted for velocity and temperature profiles. It is found that for mixed convection parameter $(\xi <0)\text{,}$ velocity profile depicts the increasing behavior for various values of power index m. However, for $\xi >0\text{,}$ velocity profile shows the decreasing behavior with respect the parameter m. Temperature distribution in the restricted domain depicts the decreasing behavior for both m and $\xi$.     

Effects of diffuser shape and back pressure on the performance of disk MHD generators

The effects of diffuser shape and back pressure on the performance of closed‐cycle disk MHD generators are investigated with two‐dimensional numerical simulations taking account of the boundary layer. The enthalpy extraction ratio decreases and fluctuates periodically with increase in the back pressure. The amplitude of power output fluctuation and the period depend on the volume of the inverse flow region. For the reduced height diffuser, the inverse flow region is suppressed and the fluctuation becomes smaller than that for the constant height diffuser. When operated with a back pressure lower than an optimum value, the diffuser does not work because of reacceleration in the diffuser. For the higher back pressure, on the contrary, the inverse flow region propagates into the MHD channel, then the enthalpy extraction ratio is reduced and the Mach number at the exit of the MHD channel becomes lower than unity. For the optimum back pressure, high enthalpy extraction ratio is achieved and the adiabatic efficiency at the diffuser exit is decreased by several percent from that evaluated at the MHD channel exit. © 2000 Scripta Technica, Electr Eng Jpn, 133(2): 11–19, 2000     

Natural convection MHD mass transfer through an infinite vertical porous plate in the existence of radiation embedded in porous medium

This research focuses on studying the effects of heat and mass transfer convective flow passing through an infinite vertical plate embedded in porous media under radiation and chemical reaction with constant heat and mass flux. A magnetic field of strength is functional throughout the fluid region. The novelty of the present work is to examine the heat and mass transfer magnetohydrodynamics flow in the presence of thermal radiation. The equations governing the flow, heat and mass transfer are solved analytically using the perturbation technique. Expressions for velocity, temperature, concentration, skin-friction, Nusselt, and Sherwood numbers are obtained. The influence of physical parameters on the flow domain is described graphically and in tabular form. It is found that increase in radiation parameter reduces the velocity and temperature. Moreover, internal friction of the plate decreased with increasing values of radiation parameter.     

The Singular Value Decomposition as a Tool of Investigating Central MHD Instabilities in the HL-1M Tokamak

A variety of strong MHD instabilities are always resulted from MHD activity of Tokamak plasmas. Central MHD instabilities can be observed with pinhole cameras to record soft x-ray (SXR) emission from the plasma along many chords with a high temporal resolution. The investigation of MHD instabilities often necessitates an analysis on spatial-temporal signals. The method of Singular Value Decomposition (SVD) can split such signals into orthogonal spatial and temporal vectors, By this means, the repetition time and the characteristic radius of various MHD phenomena such as sawteeth and snake-like perturbation can be obtained. Moreover, the (1,1) MHD mode is analyzed in great detail by SVD and used to determine the radius of the q = 1 surface.     

板坯连铸结晶器内钢水偏流及其控制方法的思考

简述了板坯连铸结晶器内钢水偏流及其主要危害。作为例子,引录板坯结晶器内由SEN冻结和湍流引起的两个典型偏流的数值模拟结果。综述了控制偏流的非接接触的磁流体力学(MHD)技术及其效果,以及评估控流效果的检测方法。     

MHD Equilibrium Configuration Reconstructions for HL-2A Tokamak

The EFIT （Equilibrium Fitting） code is modified for the equilibrium configuration reconstruction in HL-2A. Signals from Langmuir probe （LP） at the divertor targ...     

Quasi-3D electron cyclotron emission imaging on J-TEXT

Electron cyclotron emission imaging(ECEI) can provide measurements of 2D electron temperature fluctuation with high temporal and spatial resolution in magnetic fusion plasma devices. Two ECEI systems located in different toroidal ports with 67.5 degree separation have been implemented on J-TEXT to study the 3D structure of magnetohydrodynamic(MHD) instabilities. Each system consists of 12(vertical) × 16(horizontal) = 192 channels and the image of the 2nd harmonic X-mode electron cyclotron emission can be captured continuously in the core plasma region. The field curvature adjustment lens concept is developed to control the imaging plane for receiving optics of the ECEI systems. Field curvature of the image can be controlled to match the emission layer. Consequently, a quasi-3D image of the MHD instability in the core of the plasma has been achieved.     

Simulation of Fault Arc Based on Different Radiation Models in a Closed Tank

This paper focuses on the simulation of a fault arc in a closed tank based on the magneto-hydrodynamic(MHD) method,in which a comparative study of three radiation models,including net emission coefficients(NEC),semi-empirical model based on NEC as well as the P1 model,is developed.The pressure rise calculated by the three radiation models are compared to the measured results.Particularly when the semi-empirical model is used,the effect of different boundary temperatures of the re-absorption layer in the semi-empirical model on pressure rise is concentrated on.The results show that the re-absorption effect in the low-temperature region affects radiation transfer of fault arcs evidently,and thus the internal pressure rise.Compared with the NEC model,P1 and the semi-empirical model with 0.7 α 0.83 are more suitable to calculate the pressure rise of the fault arc,where is an adjusted parameter involving the boundary temperature of the re-absorption region in the semi-empirical model.     

Numerical Simulation of the Dynamic Behaviors of a Gas Tungsten Welding Arc for Joining Magnesium Alloy AZ61A

Based on the Magneto-Hydro-Dynamic(MHD)theory,a united three-dimensional(3D)transient numerical model is developed to investigate the dynamic behaviors of arc plasma for a magnesium alloy AZ61A gas tungsten arc welding(GTAW)arc.The arc,electrode and workpiece are integrated into one calculation domain to avoid both presumed distribution of the current density at the electrode tip and the assumption of constant conditions of interface between welding arc and workpiece.The distributions of electric potential,current density,magnetic flux density,electromagnetic force,velocity,temperature,and pressure of the arc plasma in the 3D space are analyzed by using the numerical model.Results indicate that the maximum gradient of the electric potential in the whole arc space exists around the electrode tip,where the electric current density,electromagnetic force,and temperature are also the maximum.However,maximum pressure is found at the velocity stagnation,which is above the workpiece.Comparison between predicted temperature and measured one in arc region shows a good agreement.     

Frictional Pressure Drop for NaK-N2 Two-Phase Flow in Rectangular Cross Section Channel of Large Aspect Ratio

In this paper, the frictional pressure drop in an isothermal liquid metal-gas two-phase flow through a rectangular channel with large width-to-height ratio is treated semiempirically for a NaK-N₂ two-phase flow system.

The frictional pressure drop in the two-phase flow is compared with the following two reference values :

1. The frictional pressure drop in the liquid flowing alone in single phase with the same velocity as that of the liquid in the two-phase mixture.

2. The frictional pressure drop in the liquid flowing alone in single phase with the same mass flow rate as that of the liquid in the two-phase mixture.

The comparison with the former reference value is necessary for the prediction of friction loss in a liquid metal MHD generator channel whose medium would be two-phase mixture.

The semiempirical analysis was performed assuming the two-phase mixture to be a continuous medium with its properties, e.g. viscosity and density, defined by void fraction and the velocity determined by the total mass flow rate.

In the region of low slip and density ratio ρ_g/ρ_l the frictional pressure drop in the two-phase flow appeared to be smaller than that due to the liquid flowing alone with the same velocity as that of the liquid in the two-phase flow.

The experiments have been undertaken with the NaK-N₂ two-phase mixture flowing through a rectangular channel (4 × 60 mm²).

Data were taken over the following parameter range:

NaK velocity: 5～30 m/sec, Void fraction: 0～70%

Density ratio: 0.006～0.013, Quality: 0.07～1.10%.