新型质子导电聚合物电解质的研制及性能研究

以聚偏氟乙烯(PVDF)为基质,掺杂P2O5保水剂,研制了一种新型质子P2O5/PVDF聚合物复合薄膜电解质.应用交流阻抗技术研究了P2O5/PVDF聚合物复合薄膜电解质的导电性.讨论了该聚合物复合薄膜电解质电导率随相对湿度、测量温度变化规律.应用红外光谱法研究了掺杂P2O5后电解质的结构变化.应用热分析仪研究了P2O5/PVDF聚合物复合薄膜电解质的热稳定性.结果表明,电解质膜在低于100 ℃具有稳定性,是一种在室温电导率较高的质子导电的室温聚合物电解质.     

High Performance Flexible Actuator of Urchin‐Like ZnO Nanostructure/Polyvinylenefluoride Hybrid Thin Film with Graphene Electrodes for Acoustic Generator and Analyzer

A bass frequency response enhanced flexible polyvinylidene fluoride (PVDF) based thin film acoustic actuator is successfully fabricated. High concentrations of various zinc oxide (ZnO) is embedded in PVDF matrix, enhancing the β phase content and the dielectric property of the composite thin film. ZnO acts as a nucleation agent for the crystallization of PVDF. A chemical vapor deposition grown graphene is used as electrodes, enabling high electron mobility for the distortion free acoustic signals. The frequency response of the fabricated acoustic actuator is studied as a function of the film thickness and filler content. The optimized film has a thickness of 80 μm with 30 wt% filler content and shows 72% and 42% frequency response enhancement in bass and midrange compared to the commercial PVDF, respectively. Also, the total harmonic distortion decreases to 82% and 74% in the bass and midrange regions, respectively. Furthermore, the composite film shows a promising potential for microphone applications. Most of all, it is demonstrated that acoustic actuator performance is strongly influenced by degree of PVDF crystalline.     

Fluorinated membranes as interfaces for application in catalysis

In this work the use of poly(vinylidene) fluoride based membrane as interfaces for the biphasic oxidation of benzyl alcohol to benzaldheyde has been reported. The membranes have been prepared by means of dry-wet phase inversion. Membranes with different surface characteristics have been selected for the oxidation reaction.     

High-velocity impact experiment of aluminum foam sample using powder gun

Porous materials such as aluminum foam have been investigated for possible use as impact shock absorbers in transportation aeronautic applications. However, the response of aluminum foam during impacts at high velocities of more than 100 m/s is not yet fully understood. A high-velocity impact experiment was therefore carried out to clarify impact shock absorption properties of aluminum foam. A one-stage powder gun was used to accelerate an aluminum foam sample to impact a rigid wall. Velocity and deformation of the aluminum foam sample during impact was studied using a digital high-speed video camera, while the pressure wave in the aluminum foam sample was measured using a PVDF gauge. The experimental observations revealed uneven collapse of the aluminum foam sample structure during high speed impact with a general stress plateau effect, typical for cellular material structures when subjected to quasi-static loading.     

高功率激光冲击处理装置及其驱动冲击波实验研究

对实验研制的高功率、短脉冲强激光冲击处理装置进行了输出特性研究,其输出能量不稳定度和激光脉冲功率不稳定度分别为±3.8%和±6.5%。采用透镜列阵的焦斑均匀化系统使光强分布起伏度达到±12%。并利用新型压电传感器(PVDF压电传感器)对其引发的激光冲击波压力进行了实时测量。     

介孔Al_2O_3/PVDF复合中空纤维膜的制备及其性能

为了提高PVDF中空纤维膜在处理含油废水过程中的亲水性能、抗压实性能和抗污染性能,实验以介孔Al2O3为无机添加粒子,采用溶液纺丝法制备出介孔Al2O3/PVDF复合中空纤维膜。通过扫描电子显微镜和傅里叶红外光谱观察介孔Al2O3/PVDF复合中空纤维膜的形貌和成分,结果证明介孔Al2O3成功地添加到PVDF中空纤维膜中。通过接触角,纯水和含油废水通量的测试,结果表明介孔Al2O3的添加改善了PVDF膜的亲水性能、抗压实性能和抗污染性能。     

Sulfonated polyether sulfone‐poly(vinylidene fluoride) blend membrane for DMFC applications

Direct methanol fuel cell (DMFC) proton exchange membranes were prepared by blending poly (vinylidene fluoride) (PVDF) with sulfonated poly(ether sulfone) (SPES). Using a diffusion cell and gas chromatographic technique, the effects of PVDF content on methanol permeability in the blended membranes were investigated. The thermal resistance and proton conductivity of the membranes were also determined by using a thermal gravimetric analysis (TGA) and an impedance analysis technique respectively. The presence of sulfonic acid groups in SPES was confirmed by Fourier transform infrared (FTIR). It was found that the methanol permeability in the blended membranes decreased with PVDF content at the expense of proton conductivity. Blended membranes show methanol permeability values much lower than that of Nafion 115, whereas the proton conductivities of the membranes are comparable with that of Nafion. The thermal stability of these blended membranes is above 250°C, which is sufficiently high for use in DMFC. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The effect of lanthanum oxide (La2O3) on the structure and crystallization of poly(vinylidene fluoride)

Rare earth polymers, due to their excellent luminescence, fluorescence, laser protective, optical and magnetic properties, have attracted much research attention in recent years. However, little attention has been paid to the effect of rare earths on the structure and crystallization of polymers, which is of important significance in the development of functional polymers. X‐ray diffraction and differential scanning calorimetry were used to investigate the structure and crystallization behavior of a poly(vinylidene fluoride) (PVDF)/lanthanum oxide (La₂O₃) composite. The results showed that the degree of perfection, crystal size, crystallization rate and isothermal crystallization activation energy of PVDF in the composite decreased, compared with pure PVDF. The spherulite nucleation and growth for PVDF and PVDF composite were analyzed in detail using the Lauritzen‐Hoffman equation. The modified Avrami equation and the Mo equation were used to study the non‐isothermal crystallization kinetics. The addition of La₂O₃ did not change the crystal structure and nucleation process for PVDF, but it decreased markedly the crystal growth rate and led to the formation of unstable crystals. This was attributed to the fact that too much La₂O₃ prevented PVDF molecular chains from moving and arranging in an orderly manner into crystals. Copyright © 2010 Society of Chemical Industry     

Enhancement of β phase crystals formation with the use of nanofillers in PVDF films and fibres

Nanoclay and carbon nanotubes (CNT) have been in focus recently as means of enhancing β phase crystals formation in poly(vinylidene fluoride)(PVDF). Dominantly, the so-far work has been carried out on films/thin sheets filled with nanoclay. It has been found, mainly from combined XRD and DSC data, that nanoclay influences the PVDF structure, and particularly the β phase crystals formation is enhanced. Results published by various groups are in fairly good agreement. There are no results for nanoclay filled melt-spun PVDF fibres.The influence of CNT on PVDF structure has been less studied. XRD data indicating an enhancing role of multi-wall carbon nanotubes (MWNT) on β phase crystals formation in solution compounded PVDF films are available. Published results for MWNT/PVDF films are not in good agreement. The only study into single-wall carbon nanotube (SWNT)/PVDF has been made on electrospun nanofibres.We explore above findings towards melt-spun nanofilled PVDF fibres. We present new results obtained by us for melt-spun PVDF fibres containing non-functionalized and amino-functionalized double-wall carbon nanotubes (DWNT). The key finding is that amino-DWNT can influence the β to α polymorphic balance.     

PVDF冲击压力传感器的制备和应用

PVDF（聚偏氟乙烯）及其共聚物压电计具有响应快、灵敏度高、测压范围宽等特点，是一种理想的冲击压力传感器。用它制作超高压力传感器的关键是必须解决传感器的一致性问题。本文对近年来国内外在此方面的工作进行了总结，给出了该类传感器的爆炸、高速撞击、高能脉冲激光辐照等压力测试方面的应用，并对该类传感器中存在的问题进行了归纳。