Ion implantation effect on atomic structure of deformed Si, Ir, W, Ni and Cu

It has been revealed, that in Ir subjected to severe plastic deformation, an ultrafine grained structure (UFG) is formed (the grain size of 20-30 nm). Practically no defects have been detected within the grains, while, in the case of Ar⁺ implantation, the subgrain structure with characteristic sizes of about 3-5 nm is formed; defects have been detected within subgrains.The subgrain structure was also revealed in UFG Ni and Cu after severe plastic deformation (SPD) (subgrain size of 3-15 nm), but in the latter case the observed boundary region is broader and subgrain is highly disoriented.     

Diffusion-controlled size-selective chloride ion sensing in the presence of bromide ion using a thin, nanoporous, plasma-polymerized coating on an Ag/AgCl electrode

We have developed a diffusion-controlled size-selective method for sensing chloride ion in the presence of bromide ion, based on a thin, nanoporous, plasma-polymerized coating of hexamethyldisiloxane on an Ag/AgCl electrode. Sub-nanometer-sized pores responsible for a highly cross-linked polymer network in the plasma-polymerized coating allowed diffusion-controlled permeation of chloride ion while blocking the larger bromide ion. An electrode coating of thickness greater than 70 nm enabled chloride detection in the concentration range 1-10 mM in the presence of 0.63 mM bromide ion. Advantages of this approach are: (1) simple design compared with ionophore-based strategies and (2) compatibility with microfabrication and mass production processes.     

Secondary ion emission from Ti and Si targets induced by medium energy Ar ion bombardment - Experiment and computer simulation

The paper presents experimental results of secondary ion energy distributions obtained for Ti and Si targets bombarded by 20-30 keV monoisotope Ar⁺ ion beam. The influence of the extraction voltages between target and a slit of the electrostatic energy analyzer entrance on the energy distributions of secondary ions was investigated. After optimization of the secondary ion extraction system, the mass spectra of secondary ions were also measured. The investigations were done using recently built experimental system. Experimental data are compared with the computer simulation results obtained using TRQR and SATVAL codes.     

钼酸铵溶液深度净化工艺探索

对传统的钼酸铵溶液净化工艺及文献介绍工艺进行了较为详细的分析 ,并与实验数据对比分析 ,找到了较为合理的工艺方案     

室温离子注氢CeO2的微结构及价态研究

利用高分辨透射电子显微镜(HRTEM)及电子能量损失谱(EELS)对室温下注入氢离子的CeO2烧结体的显微组织结构和价态进行了原位观察和分析。结果表明：室温注氢，虽可以使严重损伤区内氧的状态发生明显改变，却不能引起CeO2的相转变及Ce的价态改变；这一结果可能与氢离子因尺寸太小不能占据CeO2的正常格点位置从而无法有效形成氧空位以及室温下CeO2中Ce和O的扩散比较困难等因素有关。     

腐蚀环境中海工混凝土抗氯离子侵蚀性

模拟我国南方沿海浪溅区和水位变动区的海工钢筋混凝土结构物的腐蚀环境，对掺入粉煤灰和矿渣的混凝土抗氯离子侵蚀性进行了试验。结果表明，在水灰比相同的条件下，加掺和料的混凝土抗氯离子侵蚀性高于普通混凝土。     

某大厦临时钢平台的设计与安装

首都师范学院国际文化学院大厦工程中有两个距地面 2 5m的过廊。在施工中采用另外设立钢结构临时施工平台的方法 ,与传统的搭设满堂脚手架的施工方法相比 ,为过廊的施工节省了工期和造价     

稀土元素的分离技术

对目前稀土元素分离过程中几种常用的分离技术进行了综述，使用得较多的仍然是溶剂萃取法和离子交换法，而且新方法也在不断地出现。     

退火损伤对Er注入GaAs和Yb注入InP发光的影响

本文报道了CaAs∶Er、InP∶Yb发光样品的二次离子质谱、X-射线双晶衍射测量结果及其与Er离子的表面成份的关系.分析讨论了退火损伤对GaAs∶Er和InP∶Yb发光的影响以及Er~(3+)复合体发光中心模型.     

Instability of zeolite Y supported cobalt sulfide hydrotreating catalysts in the absence of H2S

Ion exchanged CoNaY was sulfided at 473 and 673 K and subsequently heated in He at 673 and 773 K. The resulting samples were characterized by means of overall sulfur analysis, temperature programmed Ar treatment and Fourier transform infrared spectroscopy. It was shown that during He flushing at sufficiently high temperature a protolysis reaction occurs resulting in the decomposition of Co sulfide into Co²⁺ ions and H₂S.