1Cr18Ni9Ti不锈钢氮离子注入层超显微硬度的研究

应用超显微硬度计测定１Ｃｒ１８Ｎｉ９Ｔｉ奥氏体不锈钢氮离子注入层的硬度，并用Ａｕｇｅｒ电子能谱仪（ＡＥＳ）及高精度轮廓仪测定氮离子注入层氮浓度分布及深度．结果表明：在９０ｋｅＶ，３ｘ１０~１７Ｎ＋／ｃｍ~２注入时．共注入层深度为０．１８μｍ、用１ｍＮ载荷侧得本征硬度ＨＶ为３．４７ＧＰａ，比非注入态表面硬度提高三倍之多，合理的试验载荷应≤ｌｍＮ（０．１ｇ）．     

强流脉冲离子束表面再制造技术原理与应用

采用TEMP-6型强流脉冲离子束(HIPIB)装置开展了HIPIB表面再制造技术的研发.HIPIB装置主体由高压脉冲电源系统和高功率离子二极管系统组成,通过高压短脉冲在二极管中放电产生阳极等离子体并引出ns级强流离子束.HIPIB辐照材料表面,发生显著的熔融、蒸发和剧烈烧蚀,物质喷射的反冲作用在辐照表面形成由表及里的应力波,导致材料表层强烈的热-力学效应.利用HIPIB与材料表面的相互作用,应用于涡轮叶片表面的清洗维修,可有效去除涡轮叶片基体因高温氧化形成的氧化物,伴随表层的重熔将叶片基体表面微观缺陷焊合,获得了光滑、平整的涡轮叶片修复表面.实现了HIPIB辐照在涡轮叶片表面再制造方面的应用.     

Synergistic inhibition between o-phenanthroline and chloride ion for steel corrosion in sulphuric acid

The corrosion inhibition of cold rolled steel in 0.5 M sulphuric acid in the presence of o-phenanthroline and sodium chloride (NaCl) has been investigated by using weight loss and electrochemical techniques. The experimental data suggest that the inhibition efficiency increases with increasing NaCl concentration in the presence of 0.0002 M o-phenanthroline, but decreases with increasing temperature. A synergistic effect is observed when o-phenanthroline and chloride ions are used together to prevent cold rolled steel corrosion in 0.5 M sulphuric acid. The polarization curves showed that the complex of o-phenanthroline and NaCl acts as a mixed type inhibitor. The experimental results suggested that the presence of chloride ions in the solution stabilized the adsorption of o-phenanthroline molecules on the metal surface and improved the inhibition efficiency of o-phenanthroline. The adsorption of the complex accords with the Langmuir adsorption isotherm. Some thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy have been calculated by employing thermodynamic equations. Kinetic parameters such as apparent activation energy and pre-exponential factor have been calculated and discussed.     

Dose and dose rate effects on coherent-to-incoherent transition of precipitates upon irradiation

A typical precipitation hardened alloy, Cu-Co dilute alloy was selected to study the precipitation behavior and irradiation effect on precipitates. It is found that the principal effect of ion irradiation on the coherent precipitates is loss of coherency, and TEM cross-section observations show that the fraction of the incoherent precipitates is dependent on dose but not on dose rate during heavy ion irradiation.     

辐照损伤对锆合金电化学性能的影响

综述了堆内辐照对锆合金电化学性能影响的概况，浅析了堆内辐照损伤的机理，并重点探讨了主要的堆内辐照源——中子辐照对锆合金微观结构与氧化性能的影响。进一步阐述了堆外离子轰击模拟堆内中子辐照研究方法的进展概况，并就离子轰击实验参量的选择进行了较为深入的分析。     

Synthesis and electrochemical properties of Th-doped LiMn2O4 powders for lithium-ion batteries

To improve the cycle performance of eco-friendly and cost-effective spinel LiMN2O4 as the Li secondary batteries, the Th-doped LiThxMn1-xO4 spinel powers were synthesized by solid-state method. The starting materials, Li2CO3,MnO2 and Th(NO3)4·4H2O, were mixed uniformly using a traditional ball milling, which resulted in a uniform particle size distribution in the mixed powers. Tests of X-ray diffraction, SEM, impedance spectra and charge-discharge were carried out for LiThxMn1-xO4 cathode materials. Results show that the synthesized LiTh0.01Mn1.99O4 material exhibits standard spinel structure, regular particle morphology and excellent property of charge-discharge for big current. The capacity retention of the material modified by doping Th is more than 85.1% of the first discharge specific capacity of 111.5 mAh·g -1 after 20 cycles at the current rate 1C, while the pristine LiMN2O4 is only 57% of the first discharge specific capacity of 110.2 mAh·g-1 after the same cycles at the same current rate.     

40CrNiMo钢形变离子注入复合强化机理研究

对40CrNiMo钢施行形变离子注入复合强化处理工艺,通过对未处理件、形变强化处理件、离子注入件及形变与离子注入复合强化处理件的表面显微硬度、残余应力、摩擦磨损等性能的分析和比较,探讨形变离子注入的强化机理及最佳工艺参数。结果表明,经上述各种处理后,显微硬度和耐磨性均有所提高,其中形变与离子注入复合处理后的效果更为明显。分析表明,表层硬相化合物的形成及晶粒细化是材料表面耐磨性提高的主要原因,残余应力的增加提高了抗疲劳性。     

The effect of niobium ion implantation on the oxidation behavior of aγ-TiAl-based intermetallic

The effect of niobium implantation (2×10¹⁶ and 10¹⁷ ions/cm²) on the oxidation behavior of a -TiAl-based intermetallic alloy Ti–48Al–2Cr in air at 800°C has been examined. Isothermal studies with exposure times up to 200 hr and cyclic-oxidation tests up to 800 hr revealed a negligible effect for the low implantation dose. However, a remarkable decrease in oxidation rates was observed for the material implanted with 10¹⁷ Nb ions/cm². The improvement in the oxidation resistance appeared to be similar to that obtained by alloying of the intermetallic with a few atomic percent niobium. Possible mechanisms for the effect of niobium on the oxidation resistance of TiAl-base intermetallics are discussed in view of the results obtained for the implanted material.     

用兰纳-琼斯位能和单参数Wilson方程预测汽液平衡

根据兰纳-琼斯位能提出计算Wilson方程中同类分子间能量参数gii的一个简便方法,用于单参数Wilson方程可成功地预测二元体系气液平衡,预测精度与已有方法相当,且仅需要纯物质的Tc,Pc,Zc数据。