方波扫描路径确定声源声功率误差特性分析

改进了矩形测量面方波扫描路径测量声功率的误差模型 ,以单极子、偶极子及四极子声源为例 ,给出了扫描方向、测量面离声源的距离及扫描线的密度的选取对理论误差的分布图形。分析结果表明 :对选定的测量面 ,在扫描线密度小的情况下 ,通过调整声源离测量面的距离 ,可以在声源近处找到一个最优点或较优点 ,使理论误差为零或很小 ;在绝大多数情况下 ,沿测量面长边扫描误差比沿短边扫描小。     

A hexane solution deposition of SnS2 films from tetrabutyltin via a solvothermal route at moderate temperature

SnS₂ films have been deposited on glass and alumina plate substrates by the reactions between an organotin precursor [tetrabuyltin, (CH₂CH₂CH₂CH₃)₄Sn] and carbon disulfide in n-hexane at the temperature range 180-200 °C for 10-40 h. The reaction system was oxygen free and applied at a moderate temperature. The films so prepared were characterized by techniques of X-ray diffraction, Scanning electron microscopy, Raman and Mössbauer spectroscopies. The films deposited on glass as well as on alumina plate have an average thickness of 30 μm, but have different rose-like morphologies, which are influenced by both the anisotropic growths of crystals and the different substrate structures. Photoluminescence measurements show that the films have an emission peak at approximately 590 nm.     

聚乙烯醇膜的阻醇及导电性能(Ⅱ)戊二醛交联聚乙烯醇膜

为提高直接甲醇燃料电池(DMFC)用膜的阻醇性能，采用在渗透蒸发领域广泛使用且具有良好分离效果的聚乙烯醇(PVA)为主要材料，制备了戊二醛(GA)交联PVA膜，考察了此类膜的阻醇及质子导电能力。PVA(GA)膜的阻醇效果较目前在DMFC中广泛使用的Nation膜有显著提高，但其自身不具有质子导电能力，需外加电解质溶液以提高其电导率。     

用扫描电镜研究硅酸盐、硼酸盐和磷酸盐玻璃的表面

本文采用扫描电镜及能谱仪分别研究了硅酸盐、硼酸盐和磷酸盐玻璃的风化、离子注入和离子交换，观察了表面形貌、离子交换的深度分布及离子注入对表面析晶的影响。     

Structural properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 relaxor ferroelectric thin films on SrRuO3 conducting oxides

Coating of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) relaxor ferroelectrics by a sol–gel method is followed by growth of epitaxial SrRuO₃ (SRO) metallic oxide electrodes on SrTiO₃ (STO) single-crystal substrate by pulsed laser deposition. High-quality PMN–PT films on SRO with preferred growth orientation were successfully fabricated by controlling the operation parameters. Structural properties of relaxor ferroelectric PMN–PT thin films on SRO/STO substrates have been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). In-plane and out-of-plane alignments of the heterostructure are confirmed and the structural twinning of the materials are also revealed.     

基于多孔硅及MEMS技术的微型质子交换膜燃料电池

分析了研究和发展微型质子交换膜燃料电池(μPEMFC)的重要意义和应用前景,介绍了基于多孔硅及MEMS技术的μPEMFC最新研究动态,讨论了μPEMFC的结构设计、加工过程及性能,提出了μPEMFC仍存在的问题及其技术发展对策。     

Structure of carbon nanotubes probed by local and global probes

A review is proposed of different techniques available today for the characterization of the atomic structure of carbon nanotubes. This review covers the electron microscopies, various diffraction techniques, scanning probe microscopies, and optical spectroscopies, including Raman scattering. The advantages and limitations of the characterization techniques are discussed.     

SEM observation of the “orange peel effect” of materials

This study investigated the peculiar “orange peel” effect often observed in nanomaterials using high-resolution scanning electron microscopes. The study used different materials, including semiconductor thin films and ceramic nanoparticles. The investigation established that the “orange peel” is of an artifact caused by the metallic coating of the samples in sample preparation. This discovery is important in eliminating the misinterpretation of such effect on the true surface feature of materials, hence avoiding the confusion in the discussion of the properties of nanomaterials.     

肠道杆菌的扫描电镜观察

我们用扫描电镜观察肠道杆菌种(Enterobacteriaceae)中的四种细菌,大肠埃希氏杆菌(Escherichiacoli),普通变形杆菌(Proteus vulgaris),伤寒沙门氏菌(Salmonella typhi)和福氏志贺氏菌(Shigella Flexneri)。未处理的菌落标本,菌落表面都可形成一层厚薄不同的表膜(Surface film)。四种细菌菌落的表膜,形状不一,千姿百态。适当处理后的菌落标本,则可显示菌体的本来面目。四种细菌菌体在菌落表面的分布和排列,也是各不相同,千差万别。本文根据扫描电镜的观察,对四种不同菌落进行了讨论。