Nonlinear Creep Damage Model for Concrete under Uniaxial Compression

An isotropic model for creep damage of concrete under uniaxial compression is proposed, where the combined effect of nonlinear viscous strain evolution and crack nucleation and propagation at high stress levels is considered. Strain splitting assumption is used for creep and damage contributions. Creep is modeled by a modified version of solidification theory. As usual in the modeling of damage of concrete, a damage index based on positive strains is introduced. As particular cases, the proposed model reduces to linear viscoelasticity for long time low stress levels whereas, for very high stresses, tertiary creep causing failure at a finite time can be described. The effect of strength variation with time is also included. The model is numerically implemented to perform time integration of nonlinear equations by means of a modified version of exponential algorithm. The model is validated through comparison with experimental results. Some numerical examples are also presented, where the roles of concrete ageing and strength variation with time are investigated.     

DSM技术在煤矿节电过程中的实践

The article introduces the practice of using DSM technologies including peak load shaving to fill valley, in-active power compensation and load control and acquired economic benefit.     

多孔硅发光机制的分析

从量子力学的基本理论出发讨论了量子限制效应，推导出多孔硅有效禁带宽度增量并用量子限制效应和表面态及其物质在发光中作用的理论解释了ＰＳ光致发光的实验现象。     

Morphology and Forming Mechanism of Rare Earth Inclusions During Solidification of Steel

ＭｏｒｐｈｏｌｏｇｙａｎｄＦｏｒｍｉｎｇＭｅｃｈａｎｉｓｍｏｆＲａｒｅＥａｒｔｈＩｎｃｌｕｓｉｏｎｓＤｕｒｉｎｇＳｏｌｉｄｉｆｉｃａｔｉｏｎｏｆＳｔｅｅｌ￥ＺｈａｉＱｉ－Ｊｉｅ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｔａｌｌｕｒｇｙ，ＵｎｉｖｅｒｓｉｔｙｏｆＳ...     

视频特技切换台的原理与功能

本文较系统、通俗地介绍了模拟视频特技切换台的矩阵输入、混合/效果放大器(M/E)、下游键、系统控制和同步发生器等电路单元,介绍了特技切换台的切换、混合、扫变、键控的基本原理和功能。     

CRITICAL POINTS IN THE SOLIDIFICATION OF A PURE MATERIAL

Patterns in the solidification of a pure material are dealt with in this article. Results, deduced from a simple model based on heat conduction in the two phases and the effect of surface tension on the equilibrium temperature at the moving front, present a guide for experimental work. By introducing far-field conditions imitating what can be achieved in an experiment, we explain how the depths of the phases and the width of the container influence the patterns that can be seen if one advances the control variable to the critical point and then just beyond. Our new result is the existence of a third critical point. It occurs at small wave numbers and it is independent of surface tension. It appears because we take the depths of the phases into account. These depths are input values that offer the possibility of controlling crest-to-trough conduction, stabilizing in the solid, destabilizing in the liquid. The new critical point, and the patterns attending its appearance, can be found in cells of easily attainable widths.     

码分体制多站交会测量中的电平效应分析

本文对测量站外测的码分多址，多站共作应答机测距方式中的远近电平效应问题，结合靶场的实际使用情况进行了具体分析。     

多孔硅发光的物理机制——纳米量子限制效应及表面态在发光中的作用

采用阳极氧化腐蚀的方法制备了多孔硅（ＰＳ），这种ＰＳ的微结构为纳米量级的，并具有光致发光特性，这无疑将对全硅光电子学的发展具有很大意义。根据大量实验与理论分析，提出了这种ＰＳ发光的物理机制：纳米量子限制效应和表面态及其物质在发光中的作用，从量子力学的薛定锷方程出发，用沟道势阱的近似模型，推导得到进入量子线的电子和空穴的能量势垒，ＰＳ的有效带宽Ｅ＝Ｅ＿０＋ΔＥ，对于Ｓｉ（Ｅ＿０＝１．１２ｅｖ）。完美地解释了目前在ＰＳ研究中的ＰＬ谱的篮移现象。     

AlGaAs／GaAs HBT表面效应的二维数值分析

采用表面效应集总模型综合考虑表面费米能级钉扎和表面复合效应，对ＡｌＧａＡｓ／ＧａＡｓＨＢＴ表面效应的影响进行了二维数值模拟。结果表明，表面态的存在对集电极电流几乎不产生影响，但显著增加基极电流，使得电流增益明显下降。同时还发现在台面结构ＡＩＧａＡｓ／ＧａＡｓＨＢＴ中外基区表面复合的集边效应，即外基区表面复合主要发生在发射极台面与外基区的交界处附近，与外基区长度基本无关。模拟还表明基区缓变结构可以减少表面复合，提高电流增益。