案例教学方法在《土木工程CAD》教学中的应用

基于对《土木工程CAD》教学中案例教学方法存在的问题的分析,结合《土木工程CAD》课程教学内容,通过精心选择案例,在课堂教学、实训教学和课程考核中应用教学案例,改善课程教学效果。教学实践表明,案例教学方法的应用明确课程的学习内容,激发学生的学习兴趣,保证课程教学效果,提高学生分析和解决问题的能力。     

Catalytic reduction of no over perovskite-type catalysts

In the present work, we have investigated the reduction of NO by propane over perovskite-type oxides prepared by malic acid method. The catalysts were modified to enhance the activity by substitution of metal into A or B site of perovskite oxides. In addition, the reaction conditions, such as temperature, O₂ concentration, and space velocity have been varied to understand their effects on the catalytic performance. In the LaCoO₃ type catalyst, the partial substitution of Ba and Sr into A site enhanced the catalytic activity in the reduction of NO. For the La_0.6Ba (Sr)_o.4 Co_1−x Fe_xO₃ (x=0-1.0) catalyst, the partial substitution of Fe into B site enhanced the conversion of NO, but excess amount of Fe decreased the conversion of NO. The surface area and catalytic activity of perovskite catalysts prepared by malic acid method showed higher values than those of solid reaction method. The conversion of NO increased with increasing O₂ concentration and contact time. The introduction of water into reactant feed decreased the catalytic activity but the deactivation was shown to be reversible over La_0.6Ba_0.4Co_1−x ,Fe_xO₃ catalyst.     

酚醛泡沫塑料研究

针对影响酚醛泡沫性能的诸多因紊的不确定性，对树脂粘度、发泡剂、固化剂、表面活性剂、工艺温度及其他因素对泡沫性能的影响进行了讨论。研究表明：当树脂粘度控制在2000-10000cps，发泡剂用量为3．7％-9．5％，固化剂用量为7．5%-2．5％，表面活性剂用量为3．5％-8.5％，发泡温度控制在70℃-80℃之间时，可制得质量较好的酚醛泡沫塑料。     

添加石英对莫来石－刚玉制品结构的影响

探讨了引入石英颗粒的莫来石－刚玉制品中大气孔的成因。认为与液相的生成及其在毛细管力作用下的转移有关；与莫来石生成膨胀效应对颗粒拉紧的阻碍有关；与石英相交所引起的体积膨胀有关。     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

晃电对Unipol聚乙烯生产装置的影响

介绍了晃电（由于短路等原因造成电网电压瞬时骤降至某一程度又极快恢复的现象）对Unipol聚乙烯生产装置的影响,讨论了减少晃电危害所应采取的措施,旨在为国内同类装置提供一些参考。     

Pt-V2O5-WO3/TiO2 catalysts supported on SiC filter for NO reduction at low temperature

The catalytic filter, V₂O₅-WO₃-TiO₂ supported on a ceramic filter, is known as a promising material for treating particulates and NO _x simultaneously at optimum temperatures around 320°C. In order to improve its catalytic activity at low temperatures, the effect of Pt addition on the catalytic filter has been investigated. Catalytic filters, Pt-V₂O₅-WO₃-TiO₂/SiC, were prepared by co-impregnation of Pt, V, and W precursors on TiO₂ coated-SiC filter by vacuum aided-dip coating. The Pt-added catalytic filter shifted the optimum working temperature from 280–330°C (for the non Pt-impregnated filter) to 180–230°C, providing N _x slip concentration less than 20 ppm for the treatment of 700 ppm NO at a face velocity of 2 cm/s with the same value over the non Pt-added catalytic filters. The promotional effect following the addition of Pt is believed to result from electrical modification of the catalyst maintaining a high electron transfer state. Ammonia oxidation was also observed to be dominant above the optimal temperature for SCR.     

高分子量聚氯乙烯树脂增塑,填充体系的物理力学性能研究

本文研究聚合度及增塑剂、填充剂用量对高分子量聚氯乙烯（ＨＭＷＰＶＣ）树脂物理力学性能的影响规律，并将国内外ＨＭＷＰＶＣ树脂以及ＨＭＷＰＶＣ与通用型ＰＶＣ树脂进行了性能对比。结果表明，ＨＭＷＰＶＣ增塑、填充体系的拉什强度、撕裂强度冲击回弹性及压缩永久形变等物理力学性能均随聚合度的提高而有所增加，而且各项性能均优于通用型ＰＶＣ树脂，可有效地用作橡胶代用品。分子量相同的国内外ＨＭＷＰＶＣ树脂物理力学性能基本相同。但是，后者随着增塑剂用量的增加，弹性比前者有所提高；随着填充剂用量的增加，性能变化比前者缓慢．增加填充剂用量以降低制品的体积成本。笔者还时两者物理力学性能的差异与颗粒形态之间的关系进行了探讨。     

医院信息系统集成平台建设的目的和效果

在医院信息系统建设中,集成平台的建设成为医院研究的重要内容,重点对医院信息系统基层平台建设的目的及效果进行了重点论述。     

论搜索软件对网络安全的影响

随着我国互联网技术的快速发展,我们今天的学习、工作和生活各个方面都离不开互联网技术的支撑,互联网技术对我们每一刻都会产生很大的影响,那么随着互联网技术的发展,搜索软件也逐渐占领了一席之地,并且在发展过程中,逐渐渗透到了网络中心的每一个角落,对于互联网技术的发展带来很大的影响.在这些网络发展和利用过程中,很多的私人信息、重要数据等成为了病毒或者是黑客的攻击对象,那这些行为对于网络的安全使用带来了很大的威胁,因此正确的认识到这些漏洞所在,针对搜索软件对于网络安全使用的影响效果进行分析探讨,从而提出有效的解决方式来提高网络的安全使用性能.