交换机网管系统设计方案

网管是通信专网可靠、稳定运行的重要支撑系统,通信专网发展越快,网管系统就越重要。介绍了专用于H20-20交换机的网管系统的设计方案,阐述了方案的设计思想、传输方式、系统硬件和系统软件等相关内容。该方案在实际应用中效果良好,得到了用户的认可和好评。     

Microstructural effects on the 1/f α noise of thin aluminum based films

The 1 /f^α noise was measured on a variety of Al-based thin metal films with widely varying microstructure using an ac bridge technique. The magnitude of the current noise in response to a small, non-destructive ac signal was found to vary several orders of magnitude between 0.01 and 10 Hz and was correlated to the microstructural differ-ences of the films. These differences have a strong affect on film lifetimes as measured in an accelerated electromigration test. Variation in microstructure was accomplished by different deposition temperatures and annealing parameters, and verified using TEM micrographs. Following fabrication, the current noise magnitude was measured and found to be sensitive to film width and grain size. The use of this technique to discriminate differences in film microstructure is discussed along with the correlations between ex-cess noise and the quality of the thin film as a metallic interconnection.     

星载大气痕量气体差分吸收光谱仪数据的定标处理与存储方式研究

星载大气痕量气体差分吸收光谱仪搭载于太阳同步轨道卫星,用于获取紫外至可见波段的高光谱遥感数据,可定量监测全球痕量气体分布、变化及输运过程。为满足大量实时遥感数据的读写功能,并实现载荷数据的快速有效查找与读取要求,选择HDF5数据格式存储大气痕量气体差分吸收光谱仪获得的遥感数据。为测试数据的有效性,基于载荷在实验室获取的0级测试数据,通过暗背景扣除、增益修正、光谱定标与辐射定标等处理,获得1级遥感数据,并将其成功写入HDF5文件中,从而为载荷入轨后的处理提供数据支持。     

MoO3掺杂Ba0.98Bi0.02(Ti0.9Zr0.1)O3陶瓷的介电性能研究

采用固相反应法制备了Ba<,0.98>Bi<,0.02>(Ti<,0.9>Zr<,0.1>)<,1-x>Mo<,x>O<,3>(x=0,0.01,0.03,0.05)陶瓷,研究了MoO<,3>掺杂对Ba<,0.98>Bi<,0.02>(Ti<,0.9>Zr<,0.1>)O<,3>陶瓷的相结构、表面形貌和介电性能的影响....     

一种单线串接通信的LED显示系统

该文介绍了一种基于单线串接通信的LED显示系统。该LED显示系统可以有效地解决传统LED通信系统信号传输苛刻的时序配合问题,提高整个LED显示系统的稳定性和控制灵活性,同时也比当前LED通信系统具有更高的效率,具有通信方式简单、生产成本低、应用支持方便等特点。     

基于MPEG-4编码的近距离无线视频传输系统

为实现近距离无线视频传输,提出了一种基于MPEG-4编码的近距离无线视频传输方案.由CMOS摄像头OV7620采集到的数据,通过专用MPEG-4编码器,ML86410得到速率低于2 Mbit·s-1的MPEG-4数据流,在FPGA控制器的控制下,通过nRF24L01无线发送;接收端利用同系列芯片nRF24LU1接收无线...     

“数字电子技术课程设计”实验平台的研制

本文分析了“数字电子技术课程设计”传统方式的不足,介绍了一种基于FPGA的数字电子技术课程设计实验平台的研制。该实验平台包括Xinlix公司的FPGA核心开发板和与各个课程设计内容相关的外部扩展电路模块,各个模块之间采用标准的SCSI扩展接口连接,可以针对不同的实验采用不同的扩展板,从而实现多种功能的验证。     

Cleaning Method of InSb [-1-1-1] B of n- InSb [111] A/B for growth of epitaxial layers by liquid phase epitaxy

The crystal structure of InSb [111] A/B surfaces shows that this structure is polarized. This means that the surfaces of InSb [111] A and InSb [1 1 1] B contain two different crystallized directions and they have different physical and chemical properties. Experiments were carried out on the InSb [111] A/B surfaces, showing that tartaric acid etchant could create a very smooth surface on the InSb [1 1 1] B without any traces of oxides and etch pit but simultaneously create etch pit on InSb [111] A surfaces. After lapping and polishing, some particles remained on the InSb [1 1 1] B surface, they could not be removed easily by standard cleaning process and if these particles remain on the surface of the substrate, the growth layer was not uniform and some island-like regions were observed. The purpose of this work is to remove these particles on the InSb [1 1 1] B surface. Some morphology images of both surfaces, InSb [111] A/B, will be presented.     

CuIn1−xGaxSe2‐based thin‐film solar cells by the selenization of sequentially evaporated metallic layers

Polycrystalline CuIn_1−xGa_xSe₂ (CIGS) thin films were deposited by the non‐vacuum, near‐atmospheric‐pressure selenization of stacked metallic precursor layers. A study was carried out to investigate the influence of significant factors of the absorber on the solar cells performance. An efficiency enhancement was obtained for Cu/(In+Ga) atomic ratios between 0·93 and 0·95. The slope of the observed energy bandgap grading showed a strong influence on the V_OC and the short circuit current density J_SC. An increase of the Ga content in the active region of the absorber was achieved by the introduction of a thin Ga layer on the Mo back contact. This led to an improvement of efficiency and V_OC. Furthermore, an enhanced carrier collection was detected by quantum efficiency measurements when the absorber layer thickness was slightly decreased. Conversion efficiencies close to 10% have been obtained for these devices. Copyright © 2005 John Wiley & Sons, Ltd.     

一种在无线衰落信道上支持实时业务的分组调度算法

无线分组调度算法能为蜂窝网络中的移动用户提供服务质量的保证。在此问题上,以前的研究工作中一个经典的假设是基站与用户之间的信道条件变化为一平稳随机过程。但在实际情况中,这样的平稳假设并非总是合理的。研究表明基于平稳假设的调度算法,如流行的M-LWDF和EXP-rule算法,在非平稳信道上的性能下降明显。在CDMA蜂窝通信系统中,为在时变衰落信道上支持实时数据业务,该文提出一种基于模糊逻辑控制的分组调度算法,简称FROS。它能在保证用户QoS要求的同时,考虑到无线信道的快衰落特性而充分利用多用户分集(Multiuser diversity)所带来的增益,从而提高系统容量。系统级仿真证明,FROS算法能在优化系统分组时延性能和优化系统吞吐量性能之间保持良好的平衡和折衷,在平稳信道和非平稳信道的条件下都能获得比M-LWDF和EXP-rule算法更好的性能。