Bandwidth correction for LED chromaticity

The spectral bandwidth formulae of Stearns and Stearns   are generalized for an arbitrary slit function. Correction coefficients are derived in terms of moments of the slit function. Application to model LED spectra measured with a compact, fiber‐coupled spectrometer having bandwidth of order 12 nm, and a nonlinear wavelength scale shows that accurate LED color measurements may be obtained with such an instrument. Fitting of the relatively broad slit function to line spectra for accurate wavelength calibration is also described. Such fitting, coupled consistently with the bandpass correction, improves the accuracy color measurements with a broad‐response spectrometer. © 2006 Wiley Periodicals, Inc. Col Res Appl, 31, 374–380, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20242     

A general variance predictor for Cavalieri slices

A general variance predictor is presented for a Cavalieri design with slices of an arbitrary thickness t ≥ 0. So far, prediction formulae have been available either for measurement functions with smoothness constant q = 0, 1, … , and t ≥ 0, or for fractional q ∈ [0, 1] with t = 0. Because the possibility of using a fractional q adds flexibility to the variance prediction, we have extended the latter for any q ∈ [0, 1] and t ≥ 0. Empirical checks with previously published human brain data suggest an improved performance of the new prediction formula with respect to the hitherto available ones.     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

西气东输工程用X70热轧板卷屈服强度检测值波动大的探讨

对西气东输工程用X70热轧板卷检验过程中出的屈服强度σ0.5波动大的情况进行了分析，认为拉伸试样弯曲是主要原因。这一问题可通过反复压平试样，确保试样的平直度以及适当提高钢的强度的方法加以解决。     

A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.     

金刚石光电导探测器研制及在软X光测量中的初步应用

介绍了我们自己设计制造的天然Ⅱａ型金刚石光导探测器的结构，原理，制造工艺，实验标定及其在ＩＣＦ实验中软Ｘ光测量中的应用等。     

圆盘式高速金属冷锯机锯切功率的实验研究

对１６００圆盘式高速金属冷锯机进行了锯切功率的实验研究。对某厂四种有代表性的产品，用不同的进锯速度，实测每种条件下的锯切功率变化，和最大瞬时锯切功率与平均锯切功率之比。并以实测数据为基础，得出每种产品以进锯速度为自变量的平均锯切功率回归公式。这些工作，不仅可以为这种冷锯机锯切功率的理论研究提供依据，还可直接为使用和设计这种冷锯机给出具体参考数据。     

AlF3贮仓料位计在线监控系统开发与应用

针对铝电解原材料中AlF3与Al2O3自动配料不准和难于观察及控制的现象，我厂开发应用了AlF3贮仓料位计，并与微机网络相连，实现了远程测量与在线监控，使AlF3配料更准确更均匀，电解质分子比更稳定，电解槽生产低耗高效。