Effects of Freezing on Quality of Cold-smoked Salmon Based on the Measurements of Physiochemical Characteristics

ABSTRACT: How the quality of cold-smoked Atlantic salmon ( Salmo salar ) is affected by freezing the raw fish as whole fish, as gutted fish, and as fillets before smoking, and by freezing the finished product after smoking was studied. Freezing before smoking resulted in increased product yield and water content, but softer texture and increased K-value. Freezing reduced the content of astaxanthin but increased the lightness and the color intensity of the flesh. Gaping increased when the fish was frozen as fillets before smoking. Freezing only after smoking led to fewer changes in quality than freezing before smoking, whereas refreezing the finished products had little additional effect on quality.     

纤维体积分数对K3D/MCPA复合材料力学性能的影响

本文研究了纤维体积分数对三维编织芳纶纤维增强铸性尼龙(简称K3D／MCPA)复合材料力学性能的影响。研究表明，K3D／MCPA复合材料有优异的抗冲击性能，冲击强度比三维编织芳纶纤维增强铸性尼龙(简称C3D／MCPA)和纯基体均有大幅度的提高，且随着纤维体积的提高而升高。K3D／MCPA复合材料剪切强度随纤维体积比的增大而增大，其纵向剪切强度低于纯基体和C3D／MCPA复合材料，但其横向剪切强度高于它们。K3D／MCPA复合材料弯曲强度与弯曲模量随纤维体积比的提高而提高，但与相同体积比的C3D／MCPA相比，K3D／MCPA的弯曲强度与弯曲模量均较低。     

连铸净化加压站改造

因攀钢动力厂连铸加压站的高压焦炉煤气供应不能满足生产需要，对它进行了相应改造。使工艺更加完善，煤气净化质量得到提高，并解决了生产中的一些问题。     

Influence of Billet Size on Flow, Solidification and Solute Transport in Continuous Casting

ListofSymbol　　B———Buoyancy ,m·s- 2 ;　　c———Concentrationofsoluteelement ;　　Cμ———Turbulentconstant;　　D———Diffusivityofsoluteelement ,m2 ·s- 1 ;　　fl,fs———Liquidandsolidfraction ;　　fμ———Turbulentcoefficient ;　　h———Enthalpy ,J·kg- 1 ;　　k———Turbulentkineticenergy ,m2 ·s- 2 ;　　kp———Equilibriumpartitioncoefficient;　　Kp———Permeabilityofmushyzone ,m2 ;　　K0 ———Permeabilitycoefficient;　　p———Pressure ,Pa ;　　Pr———Prandtlnumber ;…     

三种套管接头抗压缩性能研究

针对套管接头抗压缩强度问题，使用全尺寸实物试验的方法对几种不同钢级、不同螺纹形式的套管接头的抗压缩强度进行了对比试验，并借助材料力学和有限元方法对试验结果进行了分析。实物试验中出现了管体失稳和接箍跳扣两种套管接头压缩失效形式。试验结果和分析结果表明，N80、P110钢级材料的压缩屈服强度高于拉伸屈服强度；偏梯形螺纹套管接头的压缩屈服强度比同钢级、同壁厚特殊扣螺纹套管接头低6.7%～7.7%；上扣是否到位，直接影响套管接头部分的抗压缩能力，上扣不到位的特殊螺纹套管接头的抗压缩性能甚至低于偏梯形螺纹接头。同时指出，为了保证上扣质量，不应使用浮动上扣方法，管柱设计中应进行抗压缩强度设计。     

宽流道板式换热器在氧化铝生产种子分解过程中的应用

介绍了宽流道板式换热器的结构、特点及在氧化铝生产种子分解过程中的应用。     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003     

Research and application of automatic control system of argon blowing at ladle shroud

Argon blowing at the ladle shroud requires the best flow control strategy to effectively avoid the secondary oxidation of molten steel, slag entrapment and heat loss during the casting of the tundish, and at the same time, give full play to the role of bubbles to remove inclusions. Therefore, an automatic control system for argon blowing at the ladle shroud was proposed. The data collected by S7-300PLC and software programming were used to adjust the argon blowing flow online in real time according to factors such as pouring and continuous pouring. On this basis, PID control algorithm and closed loop control mechanism were used for real time adjustment. The flow control valve ensures theminimum deviation between the actual value of the flow and the set value. The production data of this system in the first quarter of 2021 in a special steel plant show that the proportion of furnaces with an acid soluble aluminum (Als) loss percentage of less than 10% of each steel grade has increased by 5.52%, and the proportion of furnaces with an Als loss percentage of more than 60% has increased from 1% decrease to 0. The actual application results show that the use of the system improves the surface quality of the continuous casting slab and the performance of the final product.     

电磁铸造液柱高度数学模型的建立及应用

为了研究熔体金属电磁立柱成形能力并计算电磁作用下的液注高度,从电磁铸造立柱成形的基本原理出发,建立了电磁场作用下金属立柱成形时液柱高度数学模型,并试验验证了模型的准确性.利用液柱高度数学模型对铝、钢、锡铅合金等金属的电磁铸造可行性,以及电力参数对液柱高度的影响进行研究.结果表明:铝电磁无模成形能力最强,而钢及锡铅合金电磁无模成形能力则基本相同;钢及锡铅合金电磁立柱成形所需的磁感强度约为0.08～0.10 T,而铝则只需约0.04T.     

稀土Pr对Al2O3-SiO2(Sf)/ZL109复合材料组织及性能的影响

本文采用挤压浸渗法 ,制得不同稀土含量的硅酸铝短纤维增强铝基复合材料。用光学显微镜观察了复合材料的铸造显微组织 ,分析了稀土含量对共晶硅组织形态的影响 ;用扫描电镜对复合材料基体中的稀土相进行了观察 ,探索了稀土相的分布位置及其形态 ;并对不同稀土含量的复合材料进行了摩擦磨损实验 ,结果表明稀土能增强复合材料的耐磨性