陶瓷表面化学镀的前处理工艺新进展

综述了非金属表面化学镀前处理工艺的现状和发展，对陶瓷化学镀的粗化和活化工艺的新进展进行了评述，侧重讨论了离子型、胶体钯型、浆料型、分子自组装吸附钯型、贱金属型活化工艺特点和进展，并展望了今后发展方向。     

Evaluation of the Properties of Si3N4/Si3N4 Joint Brazed Using a Filler Alloy Containing Pd

Si3N4 ceramic was jointed to itself using a filler alloy of Cu76.5Pd8.5Ti15, and the mechanical properties of the jointwere measured and analyzed. By using a filler alloy of Cu76.5Pd8.5Ti15, the SisN4/SisN4 joints were obtained bybrazing at 1373～1473 K f     

微波陶瓷基印制板制造工艺性研究

对微波陶瓷基印制板的制造工艺流程进行了简单的介绍,对所采用的工艺技术的有效性进行了较为详细的论述。     

万家寨引黄工程北干1号隧洞Ⅳ标155-274型TBM主轴承总成组装概要

文中对万家寨引黄工程北干线1号隧洞Ⅳ标使用的155—274型TBM主轴承总成各部件组装过程及其相应的技术要求进行了概要的描述，目的是进一步熟悉155—274型TBM主轴承总成的各个部件并加深对主轴承工作原理的理解。     

Micro assembly injection moulding

Injection moulding is established as one of the most common manufacturing processes of thermoplastics due to its high degree of automation and the short cycle times. Micro injection moulding is a rapidly growing technology that allows for the efficient production of very complex micro parts in high series. The “Market Analysis for Microsystems II 2002–2005” of the Nexus Task Force anticipates a yearly growth in the field of micro system technology of about 20% (Wechsung et al. 2002). This study identifies in addition to the continuous miniaturization the growing use of polymers in micro systems (Schneider et al. 2001). No other material group offers this wide range of material properties and permits to choose processing parameters and application properties according to necessities (Gächter 2000). While the production processes of micro technical components are mainly controllable, the assembly of these components to hybrid micro systems is a bottleneck to the industrial large scale production. The assembly itself represents a large fraction of the added product value and gains in importance with growing complexity and miniaturization of the systems.     

不倒翁式偏心防斜钻具的设计

目前所使用的各种钻具主要是靠钻具本身的重力来产生降斜力,在井斜角很小时,降斜力一般很小,在某些区块钻井时不能满足防斜要求。据此,设计了一种不倒翁式偏心防斜钻具。该钻具有1段钻铤,钻铤的两端各有1个偏心稳定器,钻铤外表面有一半圆形的偏心块,在钻铤和偏心块之间有轴承结构。利用不倒翁原理,当井斜超过一定值时,偏心块会在重力作用下自动停留在井眼低边,这样就可以将此处的钻柱顶到井眼的高边上去,从而产生一个很大的降斜力,使井斜得以有效控制。     

射频电缆组件组装工艺浅谈

近年来国内外射频电缆组件的发展很快,射频电缆组件的性能不断提高,对射频电缆组件组装工艺也提出了更高的要求.射频电缆组件组装过程多是手工操作,产品的一致性及性能很难控制,要求有良好的工艺保证,为此介绍了射频电缆组件组装工艺,包括电缆的裁剪及剥皮、内导体的连接、外导体的连接和电气性能的测试;探讨了在组装过程中应注意的问题,以及针对内导体焊接易出现虚焊问题进行研究.     

TCP Performance in Optical Packet-switched Networks

Optical packet assembly is a key function to support inter-working between TCP/IP networks and optical packet-switched networks. It is characterized by the assembly delay and by the segment aggregation needed to form an optical packet. These counter-balancing aspects depend on several environment variables, such as the TCP parameters, the access link speed, the optical packet size whose effects are studied in this paper. Performance evaluations are obtained by extensive simulations in terms of send rate of TCP flows, fairness, efficiency, and assembly delay. Some guidelines in the design of optical packets that take into account the results presented are given.