四气门汽油机缸内气流运动LDA测量结果的小波分析方法

主要采用小波分析方法研究了四气门汽油机缸内空气运动的频率结构。在一台四气门汽油机上 ,使用激光多普勒测速仪 (L DA)在倒拖工况下测量了气缸内的滚流运动 ,使用了 MATL AB 5 .1数学工具包中的小波分析方法对试验结果进行数据处理 ,得到了时域和频域分解速度信息。从这些信息中可以清楚地看到滚流 (低频湍流 )在压缩末期破碎并形成高频湍流的现象     

黄坛口水电站溢洪道弧形闸门的安全检测与更新改造设计

黄坛口水电站建于50年代,设计和施工时在总体布置上没有考虑弧形闸门的检修条件,使闸门一直处于挡水状态,存在相当多的隐患。通过对弧形闸门和启闭机的安全检测,分析了弧形闸门和启闭机存在的缺陷,提出了更新改造设计方案。     

反水锤的危害及防止

反水锤是发生在反击式水轮机尾水道中的一种特殊水锤现象，其压力峰值可达正常压力的几倍，甚至十多倍，以致造成肢解转轮、折断导叶、破坏顶盖、抬起转子的严重事故。因此，研究反水锤发生的原因，从而提出防止反水锤事故的措施尤为重要。     

韶钢第五轧钢厂自动分槽器的设计与应用

介绍了韶钢第五轧钢厂自动分槽器的设计与应用．     

3D圆阀塔板性能研究

介绍了3D圆阀塔板的结构特点和实验研究情况。以空气和水为工质进行了冷模实验,研究了3D圆阀塔板的塔板压降、雾沫夹带量和泄漏量等流体力学性能。利用氧解吸法测定其塔板效率,并在相同条件下与F1浮阀塔板进行了对比实验。结果表明,在相同条件下,3D圆阀塔板比传统F1浮阀塔板的塔板效率提高5%~15%,塔板压降约低100 Pa,泄漏量和雾沫夹带量与F1浮阀塔板基本相当,是一种综合性能优良的新型浮阀塔板。     

基于集群计算机的保护定值在线校核

采用分布式计算技术，研究并实现了基于集群计算机的保护定值在线校核并行计算方法。首先分析了保护定值校核计算的计算量和计算特点，接着对可能采用的并行计算方法进行比较，最后选择了基于电网分块的并行计算方法。采用协调机加计算子机的计算模式，在协调机上执行分块算法，通过基于主导节点的图划分方法把电网分成几块，每台计算子机只校核1块电网内的保护定值，最后由协调机收集汇总计算结果。现场应用证明，该并行计算方法正确、有效。     

An experimental and numerical study of hunting in thermostatic-expansion-valve-controlled evaporators

The dynamic behaviour of a thermostatic-expansion–valve (TEV)-controlled dry-evaporator is studied experimentally and numerically. Although the linear model of the TEV together with the distributed model of the evaporator is able to predict the stable dynamic response of the system adequately, it fails to reproduce the hunting behaviour that is observed under certain operating conditions. A scrutiny of the experimental data reveals the possible existence of hysteresis in the system. The distributed model including the experimentally determined input-output characteristics of the TEV is able to reproduce the main features of the hunting oscillations well. The amplitude and frequency of these oscillations depend on the static superheat setting, the heat load of the evaporator and the time constant of the TEV bulb.     

罗茨真空泵的溢流阀与旁通阀的组合

在简要地介绍了罗茨泵功能的基础上，通过溢流阀的改进设计，使溢流阀成为既能旁通又能溢流的组合阀，罗茨泵的功能将更加完备。     

二级采油技术在文南油田的应用

为解决文南油田高油气比井泵效低的问题，引进了二级采油技术。该技术采用特殊的二级采油工具，充分利用油井高油气比的特点，从而达到提高泵效的目的。文南油田30口井的现场试验表明，该技术应用后，平均单井泵效提高6%以上，平均单井视动液面下降739m，累积增油7560t。     

Fundamentals of stability testing

The principles on which stability tests are based are reviewed. The need to differentiate between product stability and product-container compatibility is emphasized. Recognition of this distinction is fundamental to the efficient organisation and execution of stability tests.
Attention is also drawn to the desirability of having for every product a release specification with which it must comply when manufactured and a broader check specification with which it must comply throughout its shelf-life.
Test methods and the interpretation of the data accrued throughout a test are also discussed.
It is concluded that stability tests should not be conducted in accordance with a standardized routine pattern but that the objectives of each test should be defined and the test designed to achieve those objectives in the most efficient way.
Les regles fondamentales des essais de stabilite