Bumpy Particle Adhesion and Removal in Turbulent Flows Including Electrostatic and Capillary Forces

The effect of electrostatic and capillary forces on bumpy particle adhesion and removal in turbulent flows is studied. We use the JKR theory and account for the increase of adhesion by capillary force. The effects of electrostatic forces and nonlinear hydrodynamic drag are included in the analyses. The criteria for incipient rolling and sliding detachments and electrostatic lifting removal are evaluated. A turbulence burst model is used for evaluating the peak air velocity near the substrate. The critical shear velocities for detaching particles of different sizes under different conditions are evaluated. The electric field strength needed for electrostatic removal of particles with different charges is also estimated. The results are compared with those obtained in the absence of the capillary force. Comparisons of the model predictions with the available experimental data are also presented.     

Effect of particle size on the surface oxidation and flotation behavior of galena particles in lime system

ABSTRACT

In this research, the effect of particle size on the surface oxidation and flotation behavior of galena in the lime system was studied. Coarse (?0.074 + 0.038 mm), intermediate (?0.038 + 0.025 mm) and fine (?0.025 mm) galena particles were used in the experiment. The dissolution tests, flotation tests, and sorption tests were accomplished. Through further analysis by XPS, the effect of particle size and lime was observed. The decrease of mineral particle sizes increased the adsorption ratio of collector and the dissolution of galena, while the hydrophilic product OH^?/Ca(OH)⁺ produced by dissolution occupied the dominant position, which led to the minerals hydrophilic.     

尖晶石型铁酸镉纳米粉体的超声化学法合成

超声波辐射下前驱体法合成了纳米铁酸镉（CdFe2O4）粉末。以硝酸镉、硝酸铁和脲为原料用超声化学法制得前驱体，再在950℃焙烧15h，得到平均粒径约56nm的铁酸镉粉末。得到的纳米铁酸镉粉末用X射线衍射（XRD）、扫描电镜（SEM）、傅里叶转换红外光谱（FT—IR）进行表征并得到确认，用样品振动磁强计（VSM）对其磁学参数进行了测定。     

基于改进离散粒子群禁忌算法的并行测试任务调度

针对并行测试任务调度问题特点,提出了一种解决并行测试任务调度的离散粒子群禁忌算法,设计了符合并行测试任务调度特点的粒子初始化编码方式、粒子位置转移公式以及禁忌搜索邻域。通过与禁忌搜索相结合,避免了离散粒子群算法早熟问题。通过实验以及算法对比,表明提出的算法是快速有效的,能够很好地解决并行测试任务调度问题,求得测试总时间最短的任务调度序列。     

超细聚苯乙烯(PS)树脂的制备工艺研究

采用O/W型苯乙烯微乳液体系,研究了乳化剂OP-10、助乳化剂DBS、交联剂DVB等对聚苯乙烯(PS)粒径分布的影响,基于正交试验,找出了量佳微乳液体系配方。采用激光粒度仪与透射电镜(TEM)对纳米PS粒子的粒径进行了测量研究,结果表明:交联PS粒子单分散性好,大小较均匀。     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites

The concentration of uniformly distributed particles in a fluid changes with time in the direction of gravitational or centrifugal force to form a concentration gradient. The change in the concentration is an outcome of velocity variation of particles in a fluid. A modified equation for terminal velocity, v _m of particles in polymerizing-fluid under centrifugal force is proposed to estimate the changes in the volume fraction of particles in the graded composites. The proposed equation introduces the effect of cure kinetics of polymer and its effect on particle movement in the model that was based on the modified Stoke’s law, considering the parameters related to particle hindrance, centrifugal force, particle dimensions, viscosity variation etc. The model predictions of concentration changes at the different locations of samples were compared with calcium carbonate filled polysulphide-modified-epoxy graded composites prepared by centrifugal casting.. The effect of particle size, delayed curing rate of matrix were explored. The simulated results are in good agreement with those of experiments.     

一种基于文件型病毒的粒子群检测方法

当今计算机技术的快速发展,使得计算机病毒的智能性日益突出,所以使用单一的传统检测技术在病毒检测过程中,漏检和误检的比例明显上升。为了应对目前病毒体现出的智能性,反病毒技术也必须采用相应的智能技术。文中在查阅了相关资料后,提出一种基于粒子群的病毒检测技术。首先对一个未知属性的程序依照病毒的属性来判断该程序是否是病毒程序。在确定该程序是病毒的前提条件下,再通过粒子群的方法来判断该病毒所属种类。     

Effects of the electrospray ionization parameters on the formation and morphology of colloidal microspheres of polyacrylonitrile

Polyacrylonitrile colloidal microspheres have been successfully prepared with different concentrations of electrospraying polyacrylonitrile solutions. The morphology of the colloidal spheres has two kinds of structures and is strongly affected by electrospray‐ionization parameters, such as the polymer concentration, applied voltage, and distance between the electrodes. The solvent can also affect the morphology of polyacrylonitrile. The optimum conditions for preparing colloidal spheres have been found, and differential scanning calorimetry results indicate that polyacrylonitrile colloid spheres are amorphous. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2889–2893, 2006     

有机玻璃的增韧研究

研究了不同聚合方法制备的聚丙烯酸丁酯（PBA）对浇铸型有机玻璃（PMMA）的增韧改性，研究结果表明，当PBA以纳米粒子簇分散在PMMA基体中时，对PMMA有较好的增韧改性效果。当PMMA中无皂乳液聚合PBA（e-PBA)的质量分数为0.5%时。改性PMMA的冲击强度比基体提高38%。SEM观察表明，本体聚合PBA（b-PBA)橡胶粒子以独特的纳米簇状结构均匀分布在PMMA基体中，大量的微裂纹以b-PBA粒子为中心呈放射状向外辐射，这些微裂纹在试样破坏的过程中吸收了大量的冲击能，使改性PMMA韧性得以提高。