Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing

Pressureless sintering approaches provide a simple avenue to manufacture dense ceramic parts with minimal processing equipment, but current pressureless sintering techniques have yet to demonstrate capabilities of producing dense ceramics while maintaining sub-50 nm grain sizes. Nanocrystalline yttria stablized zirconia ceramics were process from 4 mol% yttria stablized zirconia (4YSZ) nanopowders with a crystallite size of 7.5 nm using dry cold isostatic pressing (CIP) where powders are dried immediately prior to green compact formation and CIP vacuum bagging. It is shown that CIP pressures >75 000 psi (517 MPa) effectively remove pores larger than 100 nm and that pressureless sintering occurs at reduced temperatures for green densities ≥50%. Though the sintering kinetics are shown to be similar to other zirconia nanopowder sintering studies, the small initial crystallize size and reduced sintering temperature allowed densities as high as 97.2%, while retaining a ceramic grain size at or below 40 nm. Produced nanocrystalline 4YSZ ceramics with a grain size of 30.3 nm and a density of 96.3% had Vicker's hardnesses as high as 14.2 GPa and Vicker's indentation fracture resistance of 3.43 MPa·, demonstrating that simple processing approaches can be refined to fabricate nanocrystalline ceramics while maintaining high hardness and indentation fracture resistance.     

Calculation of single adsorption isotherms from gravimetrically measured binary gas mixture adsorption isotherms on activated carbon at high pressures

A method is developed for the calculation of single-component adsorption isotherms from gravimetrically measured binary gas mixture adsorption isotherms at high pressures, at two temperatures and for different mole fractions of the gas phase. The adsorption of nitrogen/methane on active carbon Norit R1 is taken as an experimental example.     

Solvent free oxidation of alcohols catalyzed by KMnO4 adsorbed on Kieselguhr

Efficient and selective oxidation of primary and secondary alcohols to the corresponding aldehydes and ketones catalyzed by potassium permanganate supported on Kieselguhr reagent under solvent free conditions are reported.     

Probabilistic and interval reliability design of the composite pressure vessel

Considering the randomness or interval character of physical parameters and applied loads of composite pressure vessels (COPV), the COPV reliability-analyzing model is built. And then the computational expressions for the mean value, standard deviation and deviation of fiber stress are deduced by the random factor method. The probabilistic and interval reliability designs on COPV are implemented by utilizing the probabilistic method and interval method combined with the improved particle swarm optimization (PSO) algorithm, respectively. The influence of fluctuation of structure uncertain parameters on COPV design thickness is inspected. Finally, examples are given to demonstrate that both probabilistic and interval reliability methods can satisfy the safety requirement and both are of higher rationality than the traditional safety factor method. And probabilistic method has a lower relative error but a higher computational complexity contrasted with the interval method.     

新型无氟发泡工艺技术改进

介绍了传统无氟发泡工艺具体工况,分析了聚氨酯泡沫存在容易产生形变、强度和韧性不高和工艺中附加物分散性不佳等问题,本文提出一种改进的无氟发泡工艺,与传统的无氟发泡工艺相比,改进的无氟发泡工艺能有效解决聚氨酯泡沫易形变的问题,提高了聚氨酯的强度及韧性,增加了附加物的分散性效果,降低了发泡体系设备.对进一步改善无氟发泡工艺技术具有重要意义.     

Deformation transition of intact coal induced by gas injection

Gas migration in coal bed is a multiple-physical process, of which not only includes gas desorption/diffusion through coal matrix and gas Darcy flow through the cleat system, but also results in deform...     

“双储”模式下的节能控制在小区供水系统中的应用

根据城市居民对供水的可靠性、稳定性、经济节能性的需求,课题组提出了一种基于"双储"模式的供水系统,并按照本市德胜住宅小区的供水要求,设计了一套由储水池、气压罐、变频器、多台水泵机组等主要设备构成的全自动变频恒压供水系统.经过近半年的运行测试,系统有效地解决了传统供水方式中存在的问题,增强了系统的总体性能,有明显的节能效果.     

Effect of thermal insulation on microstructural homogeneity and onset temperature of flash sintered materials

The present work aimed to reduce the microstructure heterogeneity inherent to flash sintering by using alumina blankets as a thermal insulator around ZnO cylindrical samples during the sintering process, under different electric field conditions. Thermal insulation significantly reduced the flash onset temperature and the grain size heterogeneity. For higher electric fields, a temperature reduction as high as 480 °C was observed, which also led to lower densification. These findings were discussed in terms of changes in the heat loss dynamics coupled with the adsorbed water retention, both promoted by the applied thermal insulation. A model to estimate the temperature at stage III of flash sintering was proposed. The final temperature reached with thermal insulation did not differ significantly from the ones without it. Thus, thermal insulation could represent an alternative route to flash sinter materials with lower furnace temperatures with energy savings up to 78 % and a more homogeneous microstructure.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.