生产线试运行过程工艺分析软件的应用

介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。     

Recommending suitable learning scenarios according to learners’ preferences: An improved swarm based approach

The paper presents a new approach for recommending suitable learning paths for different learners groups. Selection of the learning path is considered as recommendations to choosing and combining the sequences of learning objects (LOs) according to learners’ preferences. Learning path can be selected by applying artificial intelligence techniques, e.g. a swarm intelligence model. If we modify and/or change some LOs in the learning path, we should rearrange the alignment of new and old LOs and reallocate pheromones to achieve effective learning recommendations. To solve this problem, a new method based on the ant colony optimisation algorithm and adaptation of the solution to the changing optimum is proposed. A simulation process with a dynamic change of learning paths when new LOs are inserted was chosen to verify the method proposed. The paper contributes with the following new developments: (1) an approach of dynamic learning paths selection based on swarm intelligence, and (2) a modified ant colony optimisation algorithm for learning paths selection. The elaborated approach effectively assist learners by helping them to reach most suitable LOs according to their preferences, and tutors – by helping them to monitor, refine, and improve e-learning modules and courses according to the learners’ behaviour.     

Telerobot-enabled HUB-CI model for collaborative lifecycle management of design and prototyping

The HUB-CI model is investigated in a telerobotic system in a client/server network to manage the lifecycle of engineering design and prototyping. The purpose of this platform is to support collaborative engineering design and proof of concept to enhance distributed team collaboration and resource utilization. The suggested platform is exemplified in two collaboration support tools and a physical prototyping platform. Structured Co-Insight Management is developed to support innovative idea exchanges and the consensus decision-making during the design process. Conflict/error detection management helps preventing conflicts and errors during the lifecycle of design and development. Physical collaboration over the network occurs when a team controls the telerobot operation during prototyping and testing in design cycles. A pilot system is implemented with a group project for the design of an electronic circuit (including both hardware and software designs). The functional assessment method is used to compare this platform to other collaborative design tools. The system presented offers unique qualitative advantages as an integrated collaboration support system.     

人力资源管理视角中的假文凭现象及防治对策

从经济学根源上论述了文凭作为衡量人力资本的手段具有理论上的合理性,也具有现实中的无奈性.针对人力资源管理中的＂假文凭＂现象,提出了人力资源管理要从转变用人理念、完善人才考评机制、加强学历管理等方面对＂假文凭＂现象进行有效的防治及采取相应的应对措施.     

潮汕企业人才现状与对策浅析

潮汕地区是指粤东地区以讲潮州方言为主的区域,主要包括汕头、潮州和揭阳三个地区。近年来潮汕地区发展缓慢,这与人才相对匮乏不无关系,本文分析了潮汕企业人才现状,并提出了相应的对策。     

基于解析解的四阶PDE曲面裁剪方法

该文提出了一种可以广泛应用于四阶PDE曲面的裁剪方法。利用PDE的参数域内的曲线在曲面上投影,得到所求裁剪曲面的边界曲线,然后通过边界曲线的导矢与曲面在边界曲线处的法向量得到边界曲线处的跨界导矢,最后以求得的裁剪曲面的边界曲线以及裁剪曲面在边界曲线处的跨界导矢为PDE曲面的边界条件,用四阶的PDE曲面方程求得PDE裁剪曲面。     

20CrMnTi螺旋锥齿轮中出现圆鼓泡问题的分析

在对机车转向架螺旋锥齿轮的粗、精加工中发现其表面鼓起许多小泡，将其剖开酸洗后呈现为小裂纹状，该现象在实际生产中较为罕见，对此进行分析，探讨，查找原因，确定这是钢材内气泡未能焊合的结果，为此制定了改进措施。     

A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.     

Thermal error measurement and modelling in machine tools.: Part I. Influence of varying operating conditions

Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper.     

基于逻辑回归模型的木片和树皮的图像识别

为了提高木片生物能的利用率,需要除去木片中的树皮杂质。识别木片和树皮的图像对于实现二者分离具有重要作用。提出一种基于逻辑回归模型来对木片和树皮进行图像识别的算法。算法流程包括计算各种可以描述木片和树皮纹理的参数,利用SAS统计分析出最佳参数,将最佳参数计算所得的样本数据用于SAS LOGISTIC过程得到预测方程,再将预测方程用于逻辑回归模型来实现木片和树皮的图像识别。通过实验可知,最佳参数为灰度方差,该图像识别算法的正确率能达到97.4%。