基于中值滤波和梯度锐化的边缘检测

实现一种基于中值滤波和梯度锐化的边缘检测方法。首先采用既能过滤噪声又能保护边缘信息的中值滤波对图像进行平滑处理。然后采用梯度锐化加强边缘像素强度,通过简单的二值化获得图像的初始边缘,系统采用连通区域标记的方法去除位于图像封闭边界内的残留黑块。最后通过实验结果与人工提取的结果比较,进行误差分析,找出本文算法的不足之处,以便对该算法进行改进。实践证明,本文的边缘检测方法对含有噪声点且灰度分布比较均匀的图像有很好的效果。     

基于Delphi的计算机辅助检定系统设计与实现

介绍了计算机在计量领域方面的一个成功应用案例。该系统能根据计量检定的要求,精确地对各种仪表进行检定计算、数据保存、报表打印等。     

3D human pose estimation in motion based on multi-stage regression

3D human pose estimation in motion is a hot research direction in the field of computer vision. However, the performance of the algorithm is affected by the complexity of 3D spatial information, self-occlusion of human body, mapping uncertainty and other problems. In this paper, we propose a 3D human joint localization method based on multi-stage regression depth network and 2D to 3D point mapping algorithm. First of all, we use a single RGB image as the input, through the introduction of heatmap and multi-stage regression to constantly optimize the coordinates of human joint points. Then we input the 2D joint points into the mapping network for calculation, and get the coordinates of 3D human body joint points, and then to complete the 3D human body pose estimation task. The MPJPE of the algorithm in Human3.6 M dataset is 40.7. The evaluation of dataset shows that our method has obvious advantages.     

Safe and intuitive manual guidance of a robot manipulator using adaptive admittance control towards robot agility

Key areas of robot agility include methods that increase capability and flexibility of industrial robots and facilitate robot re-tasking. Manual guidance can achieve robot agility effectively, provided that a safe and smooth interaction is guaranteed when the user exerts an external force on the end effector. We approach this by designing an adaptive admittance law that can adjust its parameters to modify the robot compliance in critical areas of the workspace, such as near and on configuration singularities, joint limits, and workspace limits, for a smooth and safe operation. Experimental validation was done with two tests: a constraint activation test and a 3D shape tracing task. In the first one, we validate the proper response to constraints and in the second one, we compare the proposed approach with different admittance parameter tuning strategies using a drawing task where the user is asked to guide the robot to trace a 3D profile with an accuracy or speed directive and evaluate performance considering path length error and execution time as metrics, and a questionnaire for user perception. Results show that appropriate response to individual and simultaneous activation of the aforementioned constraints for a safe and intuitive manual guidance interaction is achieved and that the proposed parameter tuning strategy has better performance in terms of accuracy, execution time, and subjective evaluation of users.     

Human error identification in human reliability assessment. Part 2: Detailed comparison of techniques

This is the second part of a two-part review of human error identification (HEI) approaches in human reliability assessment (HRA). Part 1 reviewed the probabilistic risk assessment (PRA) context in which HRA occurs, and then detailed 12 HEI techniques which have evolved in the field of HRA. Part 2 attempts to compare the way these techniques perform against a range of criteria relevant to HEI theoretical and empirical validity, and practical usefulness in applied HRA. It is hoped that these comparisons will help assessors in the selection of techniques for practical applications. The comparisons also point to research and development needs in the area of applied HEI.     

一种新的修正恒模算法

阐述了恒模算法(CMA)、修正恒模算法(MCMA)和判决引导(DD)算法的基本原理。针对CMA和MCMA收敛速度慢,固定步长条件下收敛速度和剩余误差之间存在矛盾的缺陷,在分析CMA误差特性的基础上,利用DD算法误差函数的模值和判决器输出构造新的误差函数,提出了一种新的变步长MCMA。新算法在加快收敛速度的同时保持小的剩余误差。仿真结果表明,新算法比CMA和MCMA收敛速度快,均衡输出剩余码间干扰(ISI)小而且能克服相位偏移,具有很好的实用性。     

生产线试运行过程工艺分析软件的应用

介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。     

Utility of stereoscopic displays for indirect-vision driving and robot teleoperation

The effectiveness of an active shutter-glasses stereoscopic display (SD) and a passive polarised SD was evaluated in a live robot-teleoperation task and a simulated indirect-vision driving task in various terrains. Overall, participants completed their tasks significantly faster with the SDs in three-dimensional (3D) mode than with the SDs in the baseline 2D mode. They also navigated more accurately with the SDs in 3D mode. When the effectiveness of the two types of SDs was examined separately, results showed that the active shutter-glasses SD resulted in faster responses and task completion times than the passive polarised SD, though most of the differences failed to reach statistical significance. Perceived workload when interacting with the two SD systems did not differ significantly between the active versus passive display types or between the 3D and 2D modes of operation; however, participants reported more severe discomfort after interacting with the passive polarised SD.     

A 3D analysis of the joint torques developed during driver's ingress–egress motion

Providing an easy ingress–egress (I/E) movement remains a challenge for car designers. I/E has been largely studied in kinematics, but not in dynamics. This study proposes: (1) to evaluate and describe the motor torques developed in the lower limbs and lumbar joints during I/E motions and (2) to analyse the influence of the car geometry and subject anthropometry. An experiment was performed to observe 15 subjects of three anthropometrical groups getting in and out of a car mock-up simulating three different vehicle configurations. Motor torques were extracted using an inverse dynamics analysis. Both ingress and egress motions were primarily characterised by large torques. Overall, the taller a subject and the lower the seat of the vehicle were, the larger the peak torques were. Moreover, peak torques were higher for egress than ingress. These results are discussed in regard to the current knowledge on I/E ergonomics.