单分散六边形扁平溴碘化银微晶的结构与性能的研究

应用可控双注仪制备了一系列碘含量相同而碘在微晶中分布不同的单分散六边形扁平溴碘化银乳剂。用扫描电镜（ＳＴＥＭ）与Ｘ－射线能谱仪（ＥＤＳ）对单个微晶进行了微区分析，并用介电损耗，微波光导等方法研究了此类乳剂微晶的结构与性能的关系。结果表明：严格控制微晶成核、成熟、生长三个阶段的条件，可制得含六边形颗粒９２％以上的扁平溴碘化银乳剂，颗粒大小变化系数小于１２％。此外碘在微晶中的分布明显影响微晶的电性质和     

快重离子在石墨中引起表面及体径迹的STM研究

用多种快重离子辐照高定向石墨（HOPG），借助扫描隧道显微镜（STM）系统地研究了表面及体内缺陷，结果表明，离子在表面及解理面上都形成了小丘状的缺陷，且在表面较容易形成，可以用非连续损伤径迹结构来对其进行解释。     

β－C_2S固溶体稳定的热力学研究

从热力学理论出发，利用Ｘ射线衍射定性和定量的方法，对β－Ｃ＿２Ｓ固溶体的稳定性进行了分析和研究。经热力学理论推导得出β－Ｃ＿２Ｓ稳定的热力学条件，即掺入的微量元素的化学位μ＿ｉ须小于β－Ｃ＿２Ｓ的反应自由焓△Ｇ＿β，μ＿ｉ＜△Ｇ＿β．并定量地计算出一种微量元素稳定β－Ｃ＿２Ｓ的临界掺加量为；多种微量元素对β－Ｃ＿２Ｓ的稳定性判断条件为：     

GIC－4117／HC1．7MV Tandetron上的MeV离子注入系统

利用通用离子公司（ＧＩＣ）的４１１７型１．７ＭＶＴａｎｄｅｔｒｏｎ离子束分析设备进行ＭｅＶ级离子注入。所注入的离子能量范围由５００ｋｅＶ到１０ＭｅＶ，离子的质量在２４０ｕ以下，某些元素的负离子束流强度在１５０μＡ以上。双向机械扫描技术可将离子均匀地注入样片。     

Structural Description of Polyaromatic Nucleus in Residue

The proton nuclear magnetic resonance spectroscopy （1H-NMR）, the synchronous fluorescence spectrometry （SFS） and the ruthenium ions catalyzed oxidation （RICO） method were used to determine the chemical structure of polyaromatic nucleus in Oman residue fractions. The results of 1H-NMR analyses showed that the average numbers of aromatic rings in the aromatics, resins and asphaltenes units were 3.2, 5.6 and 8.2, respectively. SFS was used to investigate the distribution of aromatic rings in residue fractions, the main distribution range of aromatic rings in aromatics, resins and asphaltenes were 3 4 rings, 3--5 rings and more than 5 rings, respectively. The aromatic network in residue fractions was oxidized to produce numerous carboxylic acids. The types and content of benzenepolycarboxylic acids, such as phthalic acid, benzenetricarboxylic acids, benzenetetracarboxylic acids, benzenepentacarboxylic acid and benzenehexacarboxylic acid disclosed the condensed types of aromatic nuclei in the core. The biphenyl fraction （BIPH）, the cata-condensed fraction （CATA）, the peri-condensed fraction （PERI） and the condensed index （BCI） were calculated based on the benzenepolycarboxylic acids formed. The results implied that there was less biphenyl type structures in all residue fractions. The aromatics fraction was almost composed of the cata-condensed type system, and the asphaltenes fraction was wholly composed of the peri-condensed type system, while in the resins fraction co-existed the two types, herein the peri-con- densed type was predominant over the cata-condensed type. Based on the analytical results obtained in the study, the components --aromatics, resins and asphaltenes -- were given the likely structural models.     

部分种子成分的特征X射线在等效生物材料中衰减的测定

用Ｓｉ（Ｌｉ）探测器实现了Ｎａ、Ｍｇ、Ｓ、Ｃｌ的特征Ｘ射线在有机膜中的相对衰减以及与Ｏ、Ｋ元素的特征Ｘ射线能量相当的Ｘ射线或轫致辐射在有机膜中的相对衰减，分别得出了它们减的数学描述，并把实验得到不同能量的Ｘ射线在有机膜中的质量吸收系数与Ｂｅｒｋｅｌｅｙ的ＯＣＧ软件计算出的结果相比，相关都小于３０％。     

Accurate depth profiling through energy-dependent pulse height deficit compensation in gas ionization detectors

The impact of the pulse height deficit effect in gas ionization detectors on the accurate extraction of depth information from heavy ion elastic recoil detection spectra has been investigated. Thin GaN films and Ge_xSi_1−x/Si heterostructures have been analyzed with a 200 MeV ¹⁹⁷Au beam. Employing an empirical parameterisation of the pulse height deficit, a global energy calibration of the detector can be achieved. Energy spectra have been compared, calibrated with either a constant or a full energy-dependent compensation for the deficit. A constant compensation results in significant distortion of the extracted depth profile for heavier ions, whereas an energy-dependent compensation yields true concentration–depth profiles.     

水性聚氨酯电导率与聚沉值的研究

研究了软（硬）段含羧基的水性阴离子纳米聚氨酯体系的n(NCO)/n(OH)比值，COOH的质量分类，反离子各类，合成方法与电导率关系及产生的原因；探讨了该体系的n(NCO)/n(OH)值，COOH的质量分数，合成方法与临界聚沉值（Cc.c)的关系和规律。并分析，比较了软（硬）段含羧基的水性阴离子聚氨酯体系电导率与Cc.c二者关系，得出了随COOH的质量分数升高，二者变化相同，随n(NCO)/n(OH)比值升高,二者变化相反的结论。     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

新型阳离子聚合物NCP的合成及应用

介绍了用高分子反应法在固态条件下合成高阳离子度阳离子聚合物NCP的方法,确定了其最佳反应条件,测定了聚合物阳离子度和反应效率.采用L9（34）正交试验法得出合成NCP的最佳反应条件为：聚合物与阳离子化试剂质量比为11：3;催化剂用量为1.072%,反应时间为2.5 h;反应温度为80℃.实验结果表明,在反应体系中加入催化剂和少量有机或无机溶剂可显著提高反应速率和效率;使用少量润湿剂,可最大限度地限制副反应,造成反应部位的局部浓度高,提高反应效率.阳离子聚合物NCP可作为增粘降滤失剂用于配制正电性钻井液,效果优良,且耐温性能良好,同时基于阳离子与阴离子聚合物在溶液中生成凝胶状沉淀物的特性,NCP还可用于解决注聚区块生产井产出水中含高浓度聚合物的问题.