Failures of retrieval and comparison constrain change detection in natural scenes.

In a change detection paradigm, a target object in a natural scene either rotated in depth, was replaced by another object token, or remained the same. Change detection performance was reliably higher when a target postcue allowed participants to restrict retrieval and comparison processes to the target object (Experiment 1). Change detection performance remained excellent when the target object was not attended at change (Experiment 2) and when a concurrent verbal working memory load minimized the possibility of verbal encoding. (Experiment 3). Together, these data demonstrate that visual representations accumulate in memory from attended objects as the eyes and attention are oriented within a scene and that change blindness derives, at least in part, from retrieval and comparison failure. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

热老化聚丙烯薄膜宏观力学性能及微观结构的研究

通过对热老化处理的聚内稀薄膜进行X射线衍射实验.对测得的实验数据采用X射线衍射线形分析理论处理,同时对热老化聚丙烯薄膜进行拉仲形变测量,得到材料的力学性质和微晶尺寸及内部点阵畸变的变化规律.从而将热老化聚丙烯材料宏观性质变化与微观结构联系起来,找出材料聚集态精细结构随老化时问而改变的微观规律.     

Production of phosphoric acid with low content of impurities

The present work is to study the possibility for controlled distribution of the impurities when they are decomposed by sulphuric acid to wet phosphoric acid and phosphogypsum, as well as generating technological conditions for production of clean wet phosphoric acid and its derivatives - phosphoric fertilizers, food phosphates and other phosphoric products.A coefficient of distribution D_A is introduced as a general criterion for elements dispersion. The study includes relationships between the weight ratio sulphuric acid/natural phosphate and D_A; the period of decomposition and D_A; the particle's size content of the natural phosphate and D_A. The obtained experimental data and relationships about the influence of the above discussed technological parameters on dispersion of more than 23 elements allow for control of that process in wet phosphoric acid and phosphogypsum by selecting specific technological conditions. Thus, depending on the requirements of acid's consumers and procedures for secondary processing of phosphogypsum to end-products, a selective decomposition of the natural phosphates to phosphoric acid and phosphogypsum can be carried out with content of the impurities in those products varying in narrow limits.     

中国第一口超千米深水钻井液技术

LW3-1-1探井位于中国南海珠江口盆地，作业水深1480m，完钻井深为3843m，地层以大套灰色泥岩和页岩为主，具有强水敏性．要求钻井液具有良好的流变性、润滑性、抑制性，良好的抗盐、抗钙、抗高温和抗低温能力，以及强的天然气水合物抑制能力。该井采用了PFMX钻井液体系，钻井周期为49d，介绍了钻井液工艺及现场应用情况。PFMX体系表现出很多油基钻井液的优点，如好的润滑性、高的钻进速率、膜效应、强的井眼稳定及页岩抑制性，解决了强水敏性地层的井壁稳定等问题，还解决了深水钻井中遇到的挑战，如低的破裂压力梯度、天然气永合物、浅层水流、深水低温等问题，满足了该区块作业需要。     

管线用高强韧性宽厚钢板的开发

本文回顾了舞钢高强韧性管线用宽厚钢板的研制开发过程，并结合生产工艺，对钢板性能作了全面分析，指导了钢管线钢的生产。舞钢X70级管线钢有较高的断裂韧性、良好的可焊性以及抗SSCC、HIC性能。舞钢正在进行技术改造，以进一步改善组织，提高性能、满足西气东输要求。     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

Influence of water and accelerated aging on the shear fracture properties of glass/epoxy composite

The degradation of interlaminar shear strength and shear fracture toughness of glass/epoxy composites due to uptake of distilled water and sea water has been studied. The composites were immersed in water for up to eight months at temperatures up to 70 °C. Unreinforced matrix resin samples were also immersed for periods up to 2 years. Sea water was absorbed less rapidly than distilled water. Weight gains below 1% did not influence the shear strength while higher weight gains reduced shear strength up to 25%. The loss in apparent interlaminar shear strength was uniquely related to specimen weight gain. Mode II fracture toughness, G _IIc, also decreased with increasing immersion time after an initial incubation period, but the accelerated tests were found to reduce G _IIc less than the room temperature tests at comparable weight gains.     

裂纹梁动态响应有限元分析中的线弹簧模型

本文提出了一种以线弹簧模型为基础来分析裂纹梁动态响应的新数值方法．应用能量原理和断裂力学理论首次建立了线弹簧模型的刚度矩阵，从而确立了一种能使二维裂纹问题转化为一维分析的梁的有限元模型．使用这个模型，研究了不同裂纹长度和裂纹位置对悬臂梁固有频率和振型的影响，并把计算所得到的数值结果与现有的实验数据作了比较．结果表明，当无量纲裂纹长度小于０．６时，两者吻合得非常好；反之，两者之间存在较大的误差．对这种误差产生的原因，本文也作了解释．