Thermogravimetry and wide angle X-ray diffraction study on the structure of irradiated and thermally treated kodar film

The degradation behaviour of Kodar [poly(1,4-cyclohexylene dimethyl-eneterephthalate)] was investigated in air using thermogravimetry, differential thermal analysis and wide angle X-ray diffraction studies. The rates of crystallization and degradation were influenced by thermal exposure and polychromatic irradiation (Λ > 290 nm) for different time intervals. The crystallinity changes (X_c%) and activation energies (ΔE) for the systems have been determined.     

多相物质粉末衍射的物相检索

讨论了多相物质粉末衍射的物相检索问题，介绍了XRDS的物相检索软件。这是一种智能型的物相检索程序，考虑了测试数据的不确定度，以及粉末样品和块状样品衍射图谱各自的特点，不仅注意到实际样品中微量物相存在的可能，也注意到块状样品结构有序性的可能。XRDS能够帮助材料工作者同时检出样品中所含的多种物相及其含量，操作简单、结果可靠。     

压缩奇偶相干态的熵压缩特性

用数值方法讨论了相干态强度、相位角和压缩参数对压缩奇偶相干态位置熵和动量熵压缩特性的影响。结果表明，压缩奇偶相干态的位置熵和动量熵均可呈现压缩性，压缩偶相干态的最大熵压缩度比压缩奇相干态的要大。熵压缩度与相干态强度、相位角和压缩参数均有关系，但压缩因子对场熵压缩的影响最大。当其它条件一定时，压缩偶相干态在压缩参数|β|=O．95时，位置熵(或动量熵)的压缩度最大，但压缩奇相干态无此特点。     

On the Auditory Modality Superiority Effect in Serial Recall: Separating Input and Output Factors.

The modality effect in immediate recall refers to superior recall of the last few items within lists presented in spoken as opposed to printed form. The locus of this well-known effect has been unclear. N. Cowan, J. S. Saults, E. M. Elliott, and M. Moreno (2002) introduced a new method to distinguish between the effects of input serial position, output serial position, and the number of items yet to be recalled and found that large modality effects occurred only in conditions in which delay and interference at output (from items already recalled) was high. The authors replicated that finding, even when the response period included output interference acoustically similar to the spoken stimuli to be recalled. However, the authors found that output delay and interference act only by lowering the level of performance to a more sensitive range. The modality effect thus originates during encoding of the list to be recalled, not during output. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Does social dominance generate prejudice? Integrating individual and contextual determinants of intergroup cognitions.

Social dominance orientation (SDO) has been proposed as an important variable in the explanation of prejudice. We distinguish between three conceptualizations of SDO: SDO as a personality trait (personality model), SDO as a moderator of the effects of situational variables (Person X Situation model), and SDO as a mediator of the effect of social position on prejudice (group socialization model [GSM]). Four studies (N = 1,657) looking at the relations between social positions, SDO, and prejudice in a natural setting and in a laboratory setting provide strong support for the GSM. In contrast to previous correlational findings, there is evidence of a cause (dominant social position), an effect (prejudice increases), and a mediator (SDO). These results suggest new perspectives on the integration of individual and contextual determinants of prejudice. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

Investigation of the Correlation between Texture and Microstructure on a Submicrometer Scale in the TEM

In recent years the investigation of local texture and microstructure by analysis of electron backscatter diffraction patterns (EBSP) in the SEM has become a very powerful and popular method. With the introduction of SEM with field emission guns (FEG) the spatial resolution of EBSP measurements could be enhanced from 500 nm with a tungsten emitter to better than 50 nm. This evolution of SEM techniques raises the question whether transmission electron microscopy (TEM) still has fields of application in texture research. The present article answers this question with a clear “yes” and presents three examples of investigations where TEM is indispensable. The three examples comprise the investigation of the correlation between dislocation structure and deformation texture, a study on nucleation mechanisms of recrystallization in highly deformed metals and the investigation of microtexture and microstructure in nanocrystalline materials. Together with the presentation of these cases some of the necessary measurement techniques are described briefly. It is shown that TEM has to be applied when highest spatial resolution of orientation determination and imaging and high accuracy of orientation determination are to be reached, when the three‐dimensional and quantitative characterization of lattice defects is required or when materials with a high density of lattice defects are to be investigated.     

Formation reactions of chalcopyrite compounds and the role of sodium doping

The selenisation of the thin film precursors indium, Cu-In and Cu-In-Ga has been studied by in-situ X-ray diffraction. The influence of sodium doping on the kinetics of the solid-state reactions observed agrees with the predictions derived from a phenomenological model presented earlier. In this model a layer of sodium polyselenide is assumed to form at the surface of the precursor, or around each crystal grain. This layer might be responsible for impeded ion exchange in certain solid-state reactions.     

Fabrication and characterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique

We have investigated synthesis conditions and some properties of sprayed Cu₂ZnSnS₄ (CZTS) thin films in order to determine the best preparation conditions for the realization of CZTS based photovoltaic solar cells. The thin films are made by means of spraying of aqueous solutions containing copper chloride, zinc chloride, tin chloride and thiourea on heated glass substrates at various temperatures. In order to optimize the synthesis conditions of the CZTS films, two series of experiments are performed. In the first series the sprayed duration was fixed at 30 min and in the second it is fixed at 60 min. In each series, the substrate temperature was changed from 553°K to 633°K. The X-ray diffraction shows, on one hand, that the best crystallinity was obtained for 613°K as substrate temperature and 60 min as sprayed duration. On the other hand, these CZTS films exhibit the kesterite structure with preferential orientation along the [112] direction. Atomical Force Microscopy was used to determine the grain sizes and the roughness of these CZTS thin film. After the annealing treatment, we estimated the optical band-gap energy of the CZTS thin film exhibiting the best crystallinity as 1.5 eV which is quite close to the optimum value for a solar cell.     

Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.