Calculation of neutron and gamma-ray energy spectra for fusion reactor shield design: Comparison with experiment-II

Measured and calculated neutron and gamma-ray energy spectra resulting from the transport of 14 MeV neutrons through a 0.30-m-thick lithium hydride slab and through a 0.05-m-thick lead slab followed by 0.30 m of lithium hydride are compared. Also reported are comparisons of the measured and calculated neutron energy spectra behind an 0.80-m-thick assembly comprised of stainless steel type 304 and borated polyethylene. The spatial dependence of the gamma-ray energy deposition rate measured using thermoluminescent detectors is compared with calculated data. The calculated data obtained using two-dimensional radiation transport methods and ENDF/B-IV cross-section data are in good agreement for all of the experimental configurations. Calculated integral neutron energy spectra agree with the measured data within 5 to 20% depending on neutron energy for the LiH and Pb plus LiH assemblies. The gamma-ray spectra agree within 20% for these slabs. The measured and calculated neutron energy spectra behind the SS-304-borated polyethylene assembly agree within 5% except at neutron energies below 5 MeV where background radiation influences the measured spectra. The gamma-ray energy deposition rates as a function of depth agree within a factor of two at all detector locations.     

中子活化分析法研究达拉布特蛇绿岩中超镁铁质岩的地球化学特征

用预浓集中子活化法测定了达拉布特蛇绿岩中超镁铁质岩中的稀土元素（REE），用仪器中子活化法测定了其中的过渡金属元素。依据测定结果分析了过渡金属及REE的地球化学特征。认为，二辉橄榄岩X12可能代表原始地幔的化学成分；二辉橄缆岩X10，X11和含矿的纯橄岩X17，方辉橄榄岩X18为上地幔经历了部分熔融后残留的地幔物质；不含矿的纯橄岩X8和异剥橄榄岩X7，X9为自镁铁质熔融体在上地幔内以堆晶作用形成的超镁铁质岩类。     

国产与美国CR－39固体径迹探测器探测中子性能的比较研究

用Ａｍ—Ｂｅ中子源照射国产ＳＹ－２型ＣＲ－３９与美国ＣＲ—３９固体径过探测器，在蚀刻时间较短时，测量它们表面径迹密度与蚀刻时间的变化，求得单位质量ＣＲ－３９中可蚀刻径迹数目，并在蚀刻时间较长时，测量两种ＣＲ－３９表面径迹密度的饱和值，对两种ＣＲ—３９探测器进行对比。测量表明，国产ＳＹ—２型ＣＲ—３９与美国ＣＲ－３９探测快中子的灵敏度在误差范围内符合，它们具有相同的快中子灵敏度。     

Effect of Carbon Properties on Melting Behavior of Mold Fluxes for Continuous Casting of Steels

Mold fluxes are synthetic slags used to coverthe liquid steel meniscus during continuous castingof steel.The flux,whichis continuously fed on thesurface of liquid pool during casting,melts first andthenflowsintothe gap between mold wall and solid-ified steel shell.It is well known that the perform-ance of the flux can greatly affect both the castingoperation and product quality.Because of its i mpor-tance,intensiveinvestigations have been performed,and considerable progress has been made[1-6].…     

基于高海拔地区的大气中子单粒子效应实时测量试验研究

开展65 nm高速大容量静态随机存取存储器（SRAM）大气中子单粒子效应特性及试验评价技术研究,基于4 300 m高海拔地区大面积器件阵列实时测量试验,突破效应甄别、智能远程测控等关键技术,在153 d的试验时间内共观测到错误43次,其中器件内单粒子翻转39次,多单元翻转（MCU）在单粒子翻转中占比23%,最大的MCU为9位。对高能中子、热中子和封装α粒子的贡献比例进行了分析,并基于多地中子通量数据,推演得到北京地面和10 km高空应用时的单位翻转（SBU）和MCU失效率（FIT）。发现地面处软错误的主要诱因为封装α粒子,随着海拔的增高,大气中子对软错误的贡献比例明显增大;MCU全部由高能中子引起,北京10 km高空处的MCU FIT值明显增大,其占比由地面的8%增大至26%。结合器件版图布局,对MCU产生机理进行了深入分析。最后,提出一种目标导向的存储器软错误加固策略优化方法。     

压水堆核电厂堆外源量程探测器计数率分析

压水堆核电厂启动过程中,次级中子源为堆外源量程探测器提供本底计数率,避免测量盲区,确保反应堆安全启动。但次级中子源的引入会为核电厂带来较大的经济和环境负担,同时也需承受次级中子源破损等带来的风险。为此,可使用受辐照燃料组件的自发裂变中子源进行替代,即无源启动方式。通过研究堆外源量程探测器计数率的理论计算方法,并基于运行电厂测量数据进行分析验证,为源量程探测器计数率的理论预估提供了较为完善的理论方法流程。本文结果可为无源启动源量程探测器计数率分析提供支持,同时也可用于次级中子源装载量或布置位置的优化分析等。     

基于蒙特卡罗方法的复合材料辐射屏蔽设计北大核心CSCD

在乏燃料后处理厂的工作环境中可能存在着低能中子-γ射线混合辐射,严重威胁工作人员的人身安全。本文针对上述混合辐射环境,利用蒙特卡罗程序Geant4模拟计算了一种钨/硼纤维增强含硼/铋聚合物复合材料中不同材料参数对低能中子和γ射线综合防护效果的影响。结果显示,此种钨/硼纤维复合材料对低能中子和γ射线均具有良好的屏蔽效果。文章证实了纤维垂直排布方式具有比平行排布方式更优的屏蔽效果,且垂直排布方式下透过粒子束的强度分布更加均匀。此外,在聚合物基体中掺杂一定质量分数的硼/铋可以进一步增强复合材料的辐射屏蔽效果。依据这些结果我们认为此种复合材料可以为后处理厂等辐射环境中的防护服及相关防护用具提供参考。     

Order vs. Disorder: Cholesterol and Omega-3 Phospholipids Determine Biomembrane Organization

Lipid structural diversity strongly affects biomembrane chemico-physical and structural properties in addition to membrane-associated events. At high concentrations, cholesterol increases membrane order and rigidity, while polyunsaturated lipids are reported to increase disorder and flexibility. How these different tendencies balance in composite bilayers is still controversial. In this study, electron paramagnetic resonance spectroscopy, small angle neutron scattering, and neutron reflectivity were used to investigate the structural properties of cholesterol-containing lipid bilayers in the fluid state with increasing amounts of polyunsaturated omega-3 lipids. Either the hybrid 1-stearoyl-2-docosahexaenoyl-sn-glycero-3-phosphocholine or the symmetric 1,2-docosahexaenoyl-sn-glycero-3-phosphocholine were added to the mixture of the naturally abundant 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine and cholesterol. Our results indicate that the hybrid and the symmetric omega-3 phospholipids affect the microscopic organization of lipid bilayers differently. Cholesterol does not segregate from polyunsaturated phospholipids and, through interactions with them, is able to suppress the formation of non-lamellar structures induced by the symmetric polyunsaturated lipid. However, this order/disorder balance leads to a bilayer whose structural organization cannot be ascribed to either a liquid ordered or to a canonical liquid disordered phase, in that it displays a very loose packing of the intermediate segments of lipid chains.     

温度极化对膜蒸馏过程的影响研究

采用直接接触式膜蒸馏，以纯水为料液，考察了材料及结构不同的5种微孔疏水膜的渗透性能．分析结果认为，膜的渗透系数和温度极化系数共同影响着膜通量的大小．实验还考察了料液温度和流率对膜通量及热效率的影响，利用膜及膜两侧边界层内传热传质理论对此进行了分析讨论．因温度极化系数随操作温度变化，可通过控制适宜操作温度获得大膜通量和高热效率．增大料液流率可强化传热，使温度极化减弱，膜通量增加．     

铝合金熔剂的研究

本文介绍了熔剂在铝合金熔炼过程中的作用,熔剂的分类和要求,常用熔剂的组成,适用范围及使用方法等。