新型热熔整体式塑料排水板研制

新型热熔整体式塑料排水板是河海大学研制的用于软土地基加固处理的一种新材料。在介绍新型热熔整体式塑料排水板的结构、原材料、生产工艺的基础上,对其性能进行了较全面的试验研究。结果表明:新型热熔整体式塑料排水板优于目前广泛使用的分体式塑料排水板,具有整体性好、抗拉强度高、排水量大、耐久性好等优点。     

Three-Dimensional Solution and Experimental Confirmation for the Electric Resistivity Testing of Surface-Breaking Defects in Green-State Powder Metallurgy Compacts

This paper investigates electrostatic voltage distributions around a surface-breaking flaw due to an injected current of known strength. The direct 3-D solution of the voltage behavior over the flawed surface is obtained numerically by the use of a boundary integral formulation. A novel iteration method is applied to solve the resulting electrostatic integral equation for the unknown surface voltage distribution. In addition to investigating the sensitivity of different flaw sizes to the observed surface voltage distribution, important issues such as suitable probe spacing and current flow orientation are studied. For sufficiently small surface-breaking flaws, a simple image source model is developed to evaluate the voltage response of hairline cracks. The model is tested by comparing it with the developed numerical solution. Experiments aimed at establishing the validity of the modeling approach show remarkable agreement with the theoretical model.     

基于融合技术的新一代联络中心的研究与设计

随着通信和信息技术的跨越式发展,传统呼叫中心已经难以满足企业快速增长的需求,同时以客户为中心和以服务为导向的经营理念对新一代联络中心提出了更高的要求。在联络中心技术快速革新的背景下,文中以软交换、NGN和分布式技术为基础,深入研究了基于融合技术的新一代联络中心的系统架构和软交换平台的逻辑关系,构建了支持全媒体业务和标准化SIP的统一通信平台。文章以联络中心中实时和非实时业务为例,分析设计了适合联络中心典型的话务和多媒体业务的信令流程,提出了适应新一代联络中心的业务部署方式,利用模糊综合评价方法对不同部署方式的特点进行对比评估,为新一代联络中心在大型企业中推广和应用提供重要的理论和实践依据。     

积分分离PID算法的电阻炉温度控制系统

为使大惯性、纯滞后的电阻炉温度控制系统的动态性能和稳态精度满足要求,提出了Smith预估结合积分分离PID算法;设计了温度控制器的硬件系统;对控制系统进行辨识;分析了Smith预估结合积分分离PID算法与单纯Smith预估控制算法的区别,并对两种控制算法进行了比较分析,确定了电阻炉温度控制系统参数;最后对Smith预估结合积分分离PID算法进行了电阻炉的温度控制实验;实验结果表明,采用Smith预估结合积分分离PID算法提高了电阻炉温度控制系统的稳定性,降低了系统的超调,稳态精度达到0.2℃,其动态性能和稳态精度满足系统控制要求.     

gain bounds for systems with sector bounded and slope‐restricted nonlinearities

This paper proposes a new method for calculating a bound on the gain of a system comprising a linear time invariant part and a static nonlinear part, which is odd, bounded, zero at zero and has a restriction on its slope. The nonlinear part is also assumed to be sector bounded, with the sector bound being (possibly) different from that implied by the slope restriction. The computation of the gain bound is found by solving a set of linear matrix inequalities, which arise from an integral quadratic constraint formulation of a multiplier problem involving both Zames‐Falb and Popov multipliers. Examples illustrate the effectiveness of the results, and comparisons are made against the state‐of‐the‐art. Copyright © 2011 John Wiley & Sons, Ltd.     

Some investigations on fuzzy P + fuzzy I + fuzzy D controller for non-stationary process

The paper addresses the adaptive behaviour of parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller. The parallel FP+FI+FD controller is actually a non-linear adaptive controller whose gain changes continuously with output of the process under control. Two non-stationary processes, whose characteristics change with time, are considered for simulation study. Simulation is performed using software LabVIEW TM . The set-point tracking response of parallel FP+FI+FD is compared with conventional parallel proportional plus integral plus derivative (PID) controller, tuned with the Ziegler-Nichols (Z-N) tuning technique. Simulation results show that conventional PID controller fails to track the set-point and becomes unstable as the process changes its characteristic with time. But the parallel FP+FI+FD controller shows considerably much better set-point tracking response and does not deviate from steady state. Also, a huge spike is observed in the output of PID controller as the reference set-point and process parameters are changed, while the FP+FI+FD controller gives spike free control signal.     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

The volume integral method of eddy-current modeling: Verification

The volume integral method of eddy-current modeling represents a flaw in metal as a set of electric dipoles located within volume elements or cells defining the flaw volume. Given this dipole distribution, impedance changes may be computed. The electric field of the dipole distribution is determined by an integral equation relating, by means of the electric field Green's tensor, the electric field due to the source to the total electric field in the flaw. The integral equation is solved by assuming that the total electric field is constant in each volume element, resulting in a matrix equation. The method has been programmed for use on a microcomputer. The method and computer program are verified using the analytical solution for a small spherical flaw and three sets of measured impedance data, measured by air-core coils along profiles overlying both surface-breaking and buried simulated flaws of known dimensions. Operating frequencies ranged between 900 and 4000 Hz. Generally agreement is good at lower frequencies ( 1000 Hz). At higher frequencies ( 4000 Hz), the agreement is not as good. This is thought to be due to the inability of the constant electric field approximation to model the steep electric field gradients present in the host metal at high frequency. The results are also sensitive to the method of computation of the electric field due to the source. Some improvements can and should be made to the method.     

两种新型误差积分模糊控制器设计及其在舰炮随动控制中的应用

本文设计了基于误差积分调整控制规则的模糊控制器和带误差积分前馈的模糊控制器，只要控制规则和参数选择恰当，就能消除系统的稳态误差，实验结果表明这两种控制器确能改善系统的静态性能。