钨极氩弧焊逆变电源系统PI控制的Simulink仿真整定

钨极氩弧焊(GTAW)逆变电源系统是典型的大信号非线性系统，很难用线性化小信号的解析方法进行近似估计，作者利用Matlab中具有建模、分析和仿真等多功能的Simulink工具包，根据逆变电源的控制结构及GTAW电弧负载的特点，建立了由PI调节的GTAW逆变电源-电弧闭环系统的模型，在此基础上，进行了Simulink仿真研究，并进行了PI参数的调整。研究表明，PI调节的比例系数对系统的e动态响应有较大的影响，积分系数对消除系统的稳态误差起着较大的作用，同时，若这两个参数选择不当，将会造成系统的不稳定。     

可逆冷带轧机速度张力多变量耦合系统的建模及分散控制

针对具有多变量、非线性、强耦合和不确定性的可逆冷带轧机速度张力系统,提出了一种基于扩张状态观测器(extended state observer,ESO)的全局积分滑模自适应反步分散控制方法.首先,采用机理建模方法,建立了相对完备的可逆冷带轧机速度张力多变量耦合系统的数学模型.其次,将各子系统的耦合项和不确定项看成外扰,通过构造的ESO对其进行动态观测,并分别引入所设计的全局积分滑模自适应反步控制器中进行补偿,速度张力系统实现了有效的动态解耦和协调控制.理论分析表明,所提出的控制方法能够保证滑模面的渐近稳定和闭环系统的渐近跟踪性能.最后,基于某1422mm可逆冷带轧机速度张力系统的实际数据进行仿真,结果验证了所提方法的有效性.     

BELL整体比例调节型电动执行机构的电路连接与调试方法

天津贝尔自动化仪表技术有限公司引进法国先进技术,生产的电动执行机构广泛用于自动控制系统。新一代“卓越引进系列”具有多种保护功能和多种控制方式,更适宜现代工控需求。在百种以上规格中,搞清楚最基本类型——标准整体比例调节型是其他类型的基础。文章结合厂家提供的资料,针对整体比例调节型电动执行机构的重要方面进行了深入的分析与总结：一是组成与原理框图;二是电路器件的作用与电路连接;三是调试的项目与具体方法。     

高性能胎面胶用集成橡胶SBR-IR-SBR

合成出了嵌段聚合物SBR—IR—SBR。通过差热分材(DSC)考察了SBR—IR—SBR生胶的玻璃化转变温度θg，发现生胶分相，两相θg互不影响。DMA分析发现该硫化胶的动态损耗曲线为双峰分布，分别对应总体系的IR相和SBR相。样品652在0℃时的，tgδ值为0．4448，60℃时的tgδ值为0．1012。综合此橡胶的各种常规物性，SBR—IR—SBR是一类高性能胎面胶。     

Underactuated fingers controlled by robust and adaptive trajectory following methods

Choosing an appropriate control scheme to alleviate nonlinearities and uncertainties is not a trivial task, especially when models are not easily available and practical evaluation provides the only means for actual performance assessment. Various factors can contribute to these nonlinearities and uncertainties, such as friction and stiction. Thus, this article investigates four different control schemes, namely PID, adaptive, conventional sliding mode control (SMC) and integral sliding mode control (ISMC) which are implemented in the Bristol Elumotion Robot Hand (BERUL) to analyse and overcome the aforementioned problems. The hand has five fingers with 16 joints and all fingers are underactuated. The implementation of the proposed control schemes are challenging since the BERUL fingers have significant friction, stiction and unknown parameters. The fingers are light in weight and fragile. Comparative performance characteristics have shown that the ISMC is the most suitable candidate to provide good experimental trajectory following and positioning control for underactuated BERUL fingers.     

Explicit solution of relative entropy weighted control

We consider the minimization over probability measures of the expected value of a random variable, regularized by relative entropy with respect to a given probability distribution. In the general setting we provide a complete characterization of the situations in which a finite optimal value exists and the situations in which a minimizing probability distribution exists. Specializing to the case where the underlying probability distribution is Wiener measure, we characterize finite relative entropy changes of measure in terms of square integrability of the corresponding change of drift. For the optimal change of measure for the relative entropy weighted optimization, an expression involving the Malliavin derivative of the cost random variable is derived. The theory is illustrated by its application to several examples, including the case where the cost variable is the maximum of a standard Brownian motion over a finite time horizon. For this example we obtain an exact optimal drift, as well as an approximation of the optimal drift through a Monte-Carlo algorithm.     

On solutions to fuzzy stochastic differential equations with local martingales

This paper deals with a class of fuzzy stochastic differential equations (FSDEs) driven by a continuous local martingale under the Lipschitzian condition. Such equations can be useful in modeling hybrid systems, where the phenomena are simultaneously subjected to two kinds of uncertainties: randomness and fuzziness. The solutions of the FSDEs are the fuzzy stochastic processes, and their uniqueness is considered to be in a strong sense. Thus, the existence and uniqueness of solutions to the FSDEs under the Lipschitzian condition is first proven. Moreover, some asymptotic properties of the solutions to the FSDEs are investigated. Finally, an illustrating example on the interest term model is provided.     

基于NB35047-2015规范的锦屏拱坝抗震复核

能源行业标准《水电工程水工建筑物抗震设计规范》(NB35047-2015)已于2015年9月1日颁布实施。介绍了依据该规范开展的锦屏一级高拱坝抗震安全复核工作。主要内容包括:基于设定地震的场地相关设计反应谱研究;采用动力拱梁分载法、线弹性有限元法和非线性有限元法,进行设计和最大可信地震作用下的应力和坝肩岩体动力稳定分析;在选定的人工地震波基础上,采用以基岩峰值加速度在设计地震基础上比例放大的方式,进行大坝地基系统在超设计地震荷载下的地震超载能力分析。复核分析表明,锦屏一级高拱坝具有较高的抗震潜力;设计地震和最大可信地震作用下,坝体抗压强度安全满足现行抗震规范要求,且抗压强度安全有较大安全裕度,坝体拉应力基本未超过混凝土容许的应力范围,仅局部应力集中部位拉应力较大,能满足校核地震作用下"不溃坝"的设防要求。     

Characterizing image quality of autostereoscopic displays by using the maximum luminance at each viewing position

A metric of the 3D image quality of autostereoscopic displays based on optical measurements is proposed. This metric uses each view's luminance contrast, which is defined as the ratio of maximum luminance at each viewing position to total luminance at that position. Conventional metrics of the autostereoscopic display based on crosstalk, which uses “wanted” and “unwanted” lights. However, in case of the multiple‐views‐type autostereoscopic displays, it is difficult to distinguish exactly which lights are wanted lights and which are unwanted lights. This paper assumes that the wanted light has a maximum luminance at the good stereoscopic viewing position, and the unwanted light also has a maximum luminance at the worst pseudo‐stereoscopic viewing position. By using the maximum luminance that is indexed by view number of the autostereoscopic display, the proposed method enables characterizing stereoscopic viewing conditions without using wanted/unwanted light. A 3D image quality metric called “stereo luminance contrast,” the average of both eyes' contrast, is proposed. The effectiveness of the proposed metric is confirmed by the results of optical measurement analyses of different types of autostereoscopic displays, such as the two‐view, scan‐backlight, multi‐view, and integral.     

基于时滞分割法的区间变时滞不确定系统鲁棒稳定新判据

针对一类存在泛数有界不确性的区间变时滞线性系统, 利用Lyapunov-Krasovskii (L-K) 泛函方法并结合线性矩阵不等式(LMI) 技术建立一种新的保守性更低的鲁棒稳定性判据. 首先基于时滞分割方法将时滞区间均分成N 等分, 针对不同的子区间构造合适的L-K 泛函; 然后在各自的分割区间采用保守性较小的积分不等式处理泛函沿时间的导数, 基于凸组合技术建立了LMI 形式的时滞相关稳定性新判据; 最后通过数值实例验证了结论的有效性.