尖晶石相型LiM_(0.2)Mn_(1.8)O_4(M=Mg、Cd)相的晶格畸变与红外吸收峰频移

通过室温固相法制备了不同元素掺杂的前驱体,并采用分步煅烧法获得了尖晶石型LiMn2O4和LiM0.2Mn1.8O4(M=Mg、Cd)相。采用XRD和FTIR技术就元素掺杂对产物晶格畸变、Mn—O键长和键能强度等微观结构参数和光谱频移现象进行分析。结果表明,不同元素掺杂导致产物产生不同程度的晶格畸变。Mg元素掺杂使晶格收缩,Mn(Ⅳ)—O和Mn(Ⅲ)—O键收缩和键能强度增加,对应吸收峰发生蓝移;Cd元素掺杂使晶格膨胀,Mn(Ⅳ)—O和Mn(Ⅲ)—O键增长和键能强度降低,对应吸收峰发生红移。     

A π-extended tetrathiafulvene derivative: Synthesis and photoluminescence properties

Solid-state emissive organic materials have received increasing attention due to their prospective applications in large-area. Here, a novel π-extended tetrathiafulvene derivative DPD with donor-π-donor structure has been newly developed to produce the prominent characteristic of aggregation-induced enhanced emission (AIEE) that exhibits higher fluorescence quantum efficiency in solid film compare to its solutions. The AIEE mechanism of DPD was studied in detail through photophysical investigations and can be dominant attributed to the formed excimer state of DPD and J-aggregates in solid state.     

Hematite solid and hollow spindles: Selective synthesis and application in gas sensor and photocatalysis

Hematite solid spindles and hollow spindles have been selectively synthesized by a template-free, economical hydrothermal method, using FeCl₃·6H₂O as the starting materials and NaOH as the homogeneous precipitant. XRD analyses indicated that the products consisted of α-Fe₂O₃. SEM and TEM measurements showed that the morphologies of products were in the shape of solid spindles and hollow spindles, respectively. A possible formation process based on the nucleation-oriented aggregation-recrystallization mechanism is proposed. Moreover, the as-prepared hollow spindle-like α-Fe₂O₃ exhibits a good response and reversibility to some organic gas, such as 2-propanol and acetone. Compared with other hematite nanostructures, the porous hollow hematite spindles show outstanding performance in gas sensing due to their large surface area and porous hollow structure. Because of the unique porous hollow structures of the samples, the photocatalytic property of the spindle-like α-Fe₂O₃ was also investigated.     

Coriander leaf mediated biosynthesis of gold nanoparticles

Extracellular biological synthesis of gold nanoparticles was achieved by a simple biological procedure using coriander extract as the reducing agent. The aqueous gold ions when exposed to coriander leaf extract are reduced and resulted in the biosynthesis of gold nanoparticles in the size range from 6.75-57.91 nm. The gold nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX), fourier transform infra-red spectroscopy (FT-IR) and transmission electron microscopy (TEM). This eco-friendly approach for the synthesis of nanoparticles is simple, amenable for large scale commercial production and technical applications.     

Microwave radiation as heating method in the synthesis of titanium dioxide nanoparticles from hexafluorotitanate-organic salts

Nanocrystalline anatase was obtained from ionic liquid-like precursors containing hexafluorotitanate-organic salts and less than 25 wt.% of water, and using boric acid as fluoride scavenger. Two alternative heating methods were explored using either a conventional oven or a domestic microwave apparatus. A significant reduction in the reaction time from 24 h to only few minutes was obtained using the microwave route. The as-prepared materials were characterized by X-ray diffraction, transmission electron microscopy, nitrogen sorption analysis, and attenuated total reflectance Fourier transformed infrared, X-ray photoelectronic and Raman spectroscopes. The convenience of using the microwave heating option was a function of the organic cation present in the precursor. Thus, organic ammonium cations containing only hydrocarbon substituents, such as diethylammonium, phenylammonium and benzyltrimethylammonium led to the precipitation of nanocrystalline anatase powder with high specific surface area (up to 120 m² g⁻¹) in a short processing time (1-3 min). Otherwise, alcohol and carboxylate functionalized cations decomposed under microwave treatment. Moreover, the choice of the organic cation allowed tuning several properties of the end material, such as particle size and pore morphology.     

氮化铝一维纳米结构制备方法和物性研究的最新进展

全面总结了近年来氮化铝一维纳米结构的各种制备方法及物理性能等研究的最新进展,并提出了有待进一步深入研究的一些发展方向。     

Nanorod heterostructures showing photoinduced charge separation

Size- and shape-dependent property modifications of semiconductor nanocrystals have been a subject of intense interest because of their potential for future engineering devices. The bandgap and related optical-property tuning of these materials are mainly governed by the nature of their band edges. In addition, fusing one type of nanocrystal over another enables further control of material properties that are dependent on the relative alignments of their energy levels. On a molecular scale, the synthesis of supramolecular compounds has inspired advances in theories for photoinduced charge transfer. Heterostructured nanocrystals potentially provide a nanoscale analog of such systems. A method for preparing heterostructured nanocrystals of complex morphologies showing photoinduced charge separation is presented. It is shown that the energy and lifetime of the charge-transfer photoluminescence band can be tuned by changing the relative alignment of band edges in CdSe/CdTe heterostructure nanorods. The long-lived charge transfer states in these type II semiconductors may make them attractive for photovoltaic applications.     

18万t/a中高压甲醇合成系统原始开车总结

介绍了18万t/a甲醇合成系统原始开车前的准备工作、开车过程及开车过程中触媒升温还原的注意事项,分析了原始开车过程中出现的主要问题,并介绍了相应的解决方法。     

生物质气催化合成甲醇的实验研究

为了探索秸秆类生物质转化为燃料甲醇的工艺条件,采用热化学方法将玉米秸秆裂解为秸秆燃气,对该燃气进行优化实验,制备出秸秆合成气.在直流流动等温积分反应器中,使用国产C301铜基催化剂,对催化合成甲醇的反应压力、反应温度、秸秆合成气组成进行优化实验研究.结果表明:合成甲醇的最佳反应温度和反应压力分别为230℃和5 MPa,秸秆合成气适宜组成为10.49%CO,8.8%CO2,40.49%H2,0.95%CnHm,37.32%N2.     

几种先进的低压甲醇生产技术简介

低压甲醇合成是甲醇生产技术的发展方向。笔者介绍了GC型轴径向低压甲醇合成技术、Lurgi型轴向低压甲醇合成技术以及JJD型低压恒温水管式甲醇合成技术的工艺流程、合成塔结构、运行情况及技术特点,这3种工艺各具创新点和优势,均为新建低压甲醇合成装置的理想选择。