橡胶对HIPS树脂落锤指标的影响

通过对高抗冲聚苯乙烯树脂出现产品落锤指标偏低问题的分析，从橡胶配量及其粒径大小上进行了改进，同时改进了工艺操作，采取了提高反应釜搅拌速度、降低乙苯浓度等措施。结果产品合格率达到９９％以上，优级品率达到９８％以上。     

Carbon molecular sieve films produced by dc sputtering

This paper reports adsorption measurements that show molecular sieve effects in amorphous hydrogenated carbon (a-C : H) films deposited by d.c. magnetron discharge decomposition of acetylene. Adsorption of organic gases on the films is studied by using a quartz crystal microbalance technique. The sieve effect in this material depends on both deposition and annealing conditions. Films having significant molecular sieve effects are found to be typically microporous and to have a very small characteristic micropore dimension. It is suggested that the d.c. sputtered a-C : H film may be useful as a molecular sieve material in selective adsorption and gas permeation studies.     

Alekseevskii-Tate revisited:An extension to the modified hydrodynamic theory of long rod penetration

The modified hydrodynamic theory of long rod penetration into semi-infinite targets was established independently by Alek-seevskii and Tate over forty years ago and since then many investigators contributed much to the development of the high speed penetration mechanics.However,in all the models proposed so far,the target resistance Rt is not well defined and usually determined by adjusting it until the predicted depth of penetration comes to an agreement with experimental data.In this paper,assumptions are...     

基于多特征融合的运动物体识别方法研究

为了实现运动目标的实时检测,本文基于多特征融合,提出了一种运动物体分级识别方法.首先通过对运动目标的分割,分析得到各个物体的形状矩特征、面积大小及运动速度.对上述特征,采用支持向量机方法对其矩特征进行快速的一级分类,然后对一级分类结果及各物体的面积、速度等信源根据其对分类的重要程度,采用模糊积分技术进行多特征融合分类.实验表明,本方法具有较强的学习能力及较高的识别精度,可有效地应用于道路监控等系统.     

一种基于步幅长度及频域特征的步态识别方法

步态识别作为一种较新的生物认证技术有其独特优势,它旨在根据人行进过程中的行走步态模式来识别其身份.提出一种基于步幅长度及频域特征的步态识别方法:首先采用背景减除算法实现运动人体检测,并根据步幅长度变化特征进行周期分割.然后提取步幅长度极值结合关键帧的频幅均值构成五维特征向量,最后用标准模式分类器在中科院自动化所提供的CASIA步态数据库中进行实验,在降低了算法复杂度的同时,获得了令人鼓舞的实验结果.     

Evolution of insoluble eutectic Si particles in anodic oxidation films during adipic-sulfuric acid anodizing processes of ZL114A aluminum alloys

The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114A aluminum alloy substrates were in-vestigated by optical microscopy (OM) and scanning electron microscopy (SE...     

Influence of electroplating conditions on magnetic properties of Fe-36wt.% Ni alloy film

A Fe-Ni soft magnetic film was prepared in sulphate solution by electroplating. The influences of the molar ratio of n [Fe2+ ]/ n [Ni2+ ], current density, bath temperature, pH and L-ascorbic acid concentration on magnetic properties of Fe-Ni alloy film were investigated. The results show that the saturated flux density(BS) of the film increases initially and decreases after it reaches the specific value with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density, bath temperature and pH. However, the relationship between L-ascorbic acid concentration and B S keeps linear. It is observed that the coercive force( Hc) is enhanced with the increase of n [Fe2+ ]/ n [Ni2+ ] molar ratio, current density and pH. By comparison, when the bath temperature increases, Hc always decreases. With the increase of L-ascorbic acid concentration, the coercive force increases initially and then decreases.     

结合阴影抑制的混合高斯模型改进算法

混合高斯模型背景法作为运动目标检测的一种经典方法,已经广泛应用于智能视频监控系统中。但是,传统的混合高斯模型背景法容易将阴影误检测为运动目标的一部分。因此,针对该方法在区分阴影和运动目标方面的不足,提出了一种将混合高斯模型背景法和HSV空间阴影抑制相结合的运动目标检测算法。这种改进算法首先将颜色空间转换到HSV空间,初步提取运动目标,然后再利用阴影的灰度值比背景中的灰度值小,而前景的灰度值比背景中灰度值大的特性,检测出运动目标中的阴影。实验结果表明,这种改进的算法明显提高了检测效果,有效抑制了阴影对运动目标检测的干扰,算法实时性也较好。     

含随机穿越特征指标的离散系统满意估计问题

当待估量的期望值是一个有界区域时, 对待估量穿越目的域边界问题进行了讨论. 通过对离散估计系统的区域极点、随机穿越特征量等指标的相容性进行分析, 给出了一种满足多指标要求的满意待机估计策略, 并设计了基于双线性矩阵不等式组(BMIs)的求解算法. 所给出的待机估计策略可保证待估量在目的域内平均滞留度满足一定的指标, 同时相对目的域边沿的平均穿越周期尽可能小, 从而达到了待估量在目的域内、外的时间分布更加均匀 的目的. 数值算例说明了所设计的估计策略满足多指标要求.