战役战术导弹目标价值排序的模糊综合评判法

针对现代战争中战役战术导弹运用的特点，确定了战役战术导弹所打击目标价值的评判指标体系，并从分析目标价值的角度出发，用模糊综合评判法对战役战术导弹所打击目标进行价值分析，建立了打击先后顺序的评判模型．最后，用实例证明了，评判模型对战役战术导弹所打击目标进行价值排序的实用性和可行性。     

ACCELERATION AMBIGUITY FUNCTION OF RADAR SIGNALS AND ITS APPLICATION

High acceleration of radar targets is analyzed using Acceleration Ambiguity Function(AAF). The acceleration resolution based on AAF is defined. The AAF and acceleration resolution of rectangle pulse signal are derivated and the conclusion that its acceleration resolution is in inverse proportion with the square of its duration is drawn. In the end, these conclusions are applied to the parameter designing and performance evaluation for a certain type of pulse Doppler radar.     

溶胶–凝胶法制备ATO-SiO_2抗静电复合薄膜的特性研究

采用两步溶胶–凝胶法制备出 ATO(掺锑氧化锡)-SiO_2复合抗静电薄膜。通过 DTA-TG、XRD、SEM 对 薄膜的结构和形貌进行了表征,结果表明:抗静电复合薄膜表面均匀致密。薄膜中 SiO_2为无定形结构,ATO 的衍射峰 与 SnO_2一致。研究了 SnO_2的含量对薄膜导电性能、结合强度和透过率的影响,发现随 SnO_2含量增加 ?(SnO_2/ SiO_2)从 5 至 12.5,薄膜的表面电阻降低(从 1010ù/□降低到 108ù/□),薄膜的结合强度下降,薄膜的透过率降低(从 89.0%降至 84.2%),结合三方面性能,得出最佳 SnO_2的配比为:?(SnO_2/ SiO_2)=10。     

电解铜箔产业发展趋势

随着技术的进步,电解铜箔在厚度上迅速向薄、超薄方向发展,THE、RCC、CAC等特殊性能铜箔需求比例快速 增加,以锂离子电池为代表的新应用领域正在形成。     

表外储油层酸化防膨剂的评价及效果分析

本文论述了采用不同防膨试验方法评价不同类型粘土防膨剂,并以回归曲线和价值工程分析防膨效果。由分子结构理论提出分子保护膜的防膨机理新观点,论述了酸液中添加具有多种功能的非离子型防膨剂QC—1可提高表外储层酸化与排酸效果。     

电荷耦合图像传感器在细线直径测控系统中的应用

文中给出了一个以氟化氪固体激光器做光源，以电荷耦合图像传感器为光屏，应用夫朗禾费衍射原理，实现对细丝直径在线检测自动控制。该方案对相关企业质量控制的自动化是有意义的。     

Surface tailoring of an ethylene propylene diene elastomeric terpolymer via plasma‐polymerized coating of tetramethyldisiloxane

In the research presented here, we explore the use of a low‐energy plasma to deposit thin silicone polymer films using tetramethyldisiloxane (TMDSO) (H(CH₃)₂? Si? O? Si? (CH₃)₂H) on the surface of an ethylene propylene diene elastomeric terpolymer (EPDM) in order to enhance the surface hydrophobicity, lower the surface energy and improve the degradation/wear characteristics. The processing conditions were varied over a wide range of treatment times and discharge powers to control the physical characteristics, thickness, morphology and chemical structure of the plasma polymer films. Scanning electron microscopy (SEM) shows that pore‐free homogeneous plasma polymer thin films of granular microstructure composed of small grains are formed and that the morphology of the granular structure depends on the plasma processing conditions, such as plasma power and time of deposition. The thicknesses of the coatings were determined using SEM, which confirmed that the thicknesses of the deposited plasma‐polymer films could be precisely controlled by the plasma parameters. The kinetics of plasma‐polymer film deposition were also evaluated. Contact angle measurements of different solvent droplets on the coatings were used to calculate the surface energies of the coatings. These coatings appeared to be hydrophobic and had low surface energies. X‐ray photoelectron spectroscopy (XPS) and photoacoustic Fourier‐transform infrared (PA‐FT‐IR) spectroscopy were used to investigate the detailed chemical structures of the deposited films. The optimum plasma processing conditions to achieve the desired thin plasma polymer coatings are discussed in the light of the chemistry that takes place at the interfaces. Copyright © 2004 Society of Chemical Industry     

基于宽带毫米波工作体制的雷达目标识别方法探讨

对基于宽带毫米波工作体制的雷达目标特征获取和识别方法进行了综合分析和探讨.表明:在毫米波照射下,雷达目标可模型化为由多个散射中心组成的扩展目标;只要发射信号有足够的带宽,就可以从回波信号中获得各散射中心的空间分布、类型等特征;仿真结果说明,这种方法对高频区复杂目标的识别是有效的.     

Effect of temperature on the optical and electro-optical properties of poly(methyl methacrylate)/E7 polymer-dispersed liquid crystal composites

Experiments on the effect of temperature on the optical and electro-optical behaviors of polymer-dispersed liquid crystals (PDLCs) are considered. Composite films composed of poly(methyl methacrylate) (PMMA) and the nematic-type liquid crystal (LC) E7 were prepared by solvent casting in chloroform. The PDLC film contained droplets of E7 from 10 to 80 wt % in a PMMA matrix. Morphological studies illustrated the formation of isolated droplets of LC due to phase separation, and their homogeneous distribution increased with increasing E7 content. Thermo-optical studies showed an increase in the nematic–isotropic transition temperature of composites, which indicated preferential solvation during the phase-separation process. The electro-optical characteristics were studied under the conditions of an externally applied square wave electric field with a He–Ne laser (λ = 632.8 nm) as a light source. The responses improved as the E7 content in PMMA increased. Semipermanent memory effects were noticed in composites at higher temperatures. Changes in the transmittance due to thermal variations provided the possibility of using such a device as a temperature sensor. The results obtained indicate that under these experimental conditions, the output can be controlled to the desired level by the selection of a suitable loading of LC to prepare PDLC electro-optically active composite films with a response time on the order of only a few milliseconds. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

论薄板坯连铸连轧产品质量优势

通过对薄板坯连铸连轧工艺的分析，深入研究了其产品的质量优势，同时还指出了在产品生产过程中需要重点注意解决的一些问题。