Lean production system design for fishing net manufacturing using lean principles and simulation optimization

Value stream mapping (VSM) is a useful tool for describing the manufacturing state, especially for distinguishing between those activities that add value and those that do not. It can help in eliminating non-value activities and reducing the work in process (WIP) and thereby increase the service level. This research follows the guidelines for designing future state VSM. These guidelines consist of five factors which can be changed simply, without any investment. These five factors are (1) production unit; (2) pacemaker process; (3) number of batches; (4) production sequence; and (5) supermarket size. The five factors are applied to a fishing net manufacturing system. Using experimental design and a simulation optimizing tool, the five factors are optimized. The results show that the future state maps can increase service level and reduce WIP by at least 29.41% and 33.92% respectively. For the present study, the lean principles are innovatively adopted in solving a fishing net manufacturing system which is not a well-addressed problem in literature. In light of the promising empirical results, the proposed methodologies are also readily applicable to similar industries.     

Model repair — aligning process models to reality

Process mining techniques relate observed behavior (i.e., event logs) to modeled behavior (e.g., a BPMN model or a Petri net). Process models can be discovered from event logs and conformance checking techniques can be used to detect and diagnose differences between observed and modeled behavior. Existing process mining techniques can only uncover these differences, but the actual repair of the model is left to the user and is not supported. In this paper we investigate the problem of repairing a process model w.r.t. a log such that the resulting model can replay the log (i.e., conforms to it) and is as similar as possible to the original model. To solve the problem, we use an existing conformance checker that aligns the runs of the given process model to the traces in the log. Based on this information, we decompose the log into several sublogs of non-fitting subtraces. For each sublog, either a loop is discovered that can replay the sublog or a subprocess is derived that is then added to the original model at the appropriate location. The approach is implemented in the process mining toolkit ProM and has been validated on logs and models from several Dutch municipalities.     

Analysis of the Datagram Congestion Control Protocol’s connection management procedures using the sweep-line method

State space explosion is a key problem in the analysis of finite state systems. The sweep-line method is a state exploration method which uses a notion of progress to allow states to be deleted from memory when they are no longer required. This reduces the peak number of states that need to be stored, while still exploring the full state space. The technique shows promise but has never achieved reductions greater than about a factor of 10 in the number of states stored in memory for industrially relevant examples. This paper discusses sweep-line analysis of the connection management procedures of a new Internet standard, the Datagram Congestion Control Protocol (DCCP). As the intuitive approaches to sweep-line analysis are not effective, we introduce new variables to track progress. This creates further state explosion. However, when used with the sweep-line, the peak number of states is reduced by over two orders of magnitude compared with the original. Importantly, this allows DCCP to be analysed for larger parameter values. Somsak Vanit-Anunchai was partially supported by an Australian Research Council Discovery Grant (DP0559927) and Suranaree University of Technology. Guy Edward Gallasch was supported by an Australian Research Council Discovery Grant (DP0559927).     

Hierarchical intelligent control with flexible AC transmission systems application

A novel hierarchical intelligent controller configuration is proposed using an artificial neural network as a control-mode classifier in the supervisory level and a set of pre-designed controllers in the lower level. Controller outputs are modified nonlinearly by the classifying signals in a structure resembling one artificial neuron with adaptively changed weights. The lower-level local controllers are implemented using neural networks. An illustrative example of this approach is based on the transient stabilization of a single-machine infinite-bus system studied in Flexible AC Transmission Systems (FACTS) research.     

一种网络服务自动部署方法

为满足网络服务使用者对网络服务部署的功能性和非功能性需求,运用Petri网的方法进行了互联网动态多变环境下的网络服务自动部署的研究,建立了一种基于Petri网的网络服务部署网模型,从形式化的角度描述了网络服务功能的部署情况,提出了一种按照服务质量来选择最优网络服务部署的算法。仿真的结果表明,与目前常用的固定部署算法和随机部署算法相比,按照该方法得到的网络服务部署能最好地满足服务使用者对服务的非功能性方面的需求。     

A process-control and diagnostic tool based on continuous fuzzy Petri nets

The use of Petri nets and fuzzy logic in intelligent process control has caught the attention of many researchers. In this paper, a Continuous Fuzzy Petri Net (CFPN) tool which integrates the three technologies of fuzzy control, Petri nets and real-time expert systems is presented. The CFPN approach can deal with real-time continuous inferencing, for the purpose of process monitoring and diagnostics, at a high level in the presence of uncertainty. This tool has been implemented in the G2 real-time expert-system environment and is currently being used by ESSO Canada.     

Modelling of induced aeration in turbine aerators by use of radial basis function neural networks

Gas induction in agitated vessels with turbine impellers can be modelled accurately by means of radial basis function neural nets. The results obtained with the radial basis neural net were significantly better than those obtained by multivariate regression models or standard back propagation neural nets. Moreover, by using the radial basis function neural net model, it was possible to conduct a sensitivity analysis of the variables affecting aeration. Increased medium density showed a strong adverse effect, while variation of the viscosity can cause an increase or a decrease in the rate of aeration, depending on the prevailing process conditions.     

FMS实时控制系统动态建模方法(一)

在建立FMS物理对象的功能模型，状态转移图（STD），面向对象的Petri网（OPN）模型的基础上，本文将着色Petri网与面向对象技术相结合，提出了一种实时控制系统的建模方法－面向对象的着色Petri网（OCPN）建模方法，此建模方法在无锡职业学院的FMS的实时控制系统中得到验证。     

基于时间Petri网的AADL模型

随着嵌入式系统设计日益复杂,对系统的描述也提出了越来越高的要求,特别是实时性能。因此如何描述实时性能逐渐受到重视。在嵌入式系统中,线程的时间属性影响着系统的实时性,因此在设计早期利用AADL描述线程,但是AADL只是一种半形式化的语言,不够精确,并可能产生二义性。因此,把AADL模型转化为时间Pe砸网,但是时间Petri网不能很好地表示AADL的时间属性。故在研究AADL模型的时间属性的基础上,针对时间Petri考虑区域值延时与固定延时,并把固定延时当作区域值时延的一种特殊情况。最后给出针对AADL模型转化为时间Petri网的相应规则。