Experimental research on combined effect of obstacle and local spraying water fog on hydrogen/air premixed explosion

In order to reveal the mechanism of water fog explosion suppression and research the combined effect of water fog and obstacle on hydrogen/air deflagration, multiple sets of experiments were set up. The results show that the instability of thermal diffusion under lean combustion conditions is the main influencing factor of hydrogen/air flame surface instability, and the existence of water fog will aggravate the hydrogen/air flame surface instability. When obstacle is not considered, 8 μm, 15 μm, 30 μm water fog can significantly reduce the flame velocity and explosion overpressure of hydrogen/air, 45 μm fine water fog plays the opposite role. When considering the relative position of the water fog release position and the obstacle, the 8 μm, 15 μm, 30 μm water fog has almost no suppression effect when released near the obstacle, but a significant suppression effect occur, when using the 45 μm water fog. In the field of theoretical research, the research results not only provide an experimental basis for the fine water fog to reduce the consequences of hydrogen explosion accidents, and the optimal diameter range used by the water fog, but also provide experimental reference for the numerical simulation of hydrogen/air explosion suppression in semi-open space, and promote the development of hydrogen explosion suppression theory. In terms of engineering applications, this study can provide a theoretical basis for the layout of fire fighting equipment in the engine room of nuclear power plants or hydrogen-powered ships.     

Numerical investigations on flashback dynamics of premixed methane-hydrogen-air laminar flames

Injecting hydrogen into the natural gas network to reduce CO₂ emissions in the EU residential sector is considered a critical element of the zero CO₂ emissions target for 2050. Burning natural gas and hydrogen mixtures has potential risks, the main one being the flame flashback phenomenon that could occur in home appliances using premixed laminar burners. In the present study, two-dimensional transient computations of laminar CH₄ + air and CH₄ + H₂ + air flames are performed with the open-source CFD code OpenFOAM. A finite rate chemistry based solver is used to compute reaction rates and the laminar reacting flow. Starting from a flame stabilized at the rim of a cylindrical tube burner, the inlet bulk velocity of the premixture is gradually reduced to observe flashback. The results of the present work concern the effects of wall temperature and hydrogen addition on the flashback propensity of laminar premixed methane-hydrogen-air flames. Complete sequences of flame dynamics with gradual increases of premixture velocity are investigated. At the flame flashback velocities, strong oscillations at the flame leading edge emerge, causing broken flame symmetry and finally flame flashback. The numerical results reveal that flashback tendency increase with increasing wall temperature and hydrogen addition rate.     

A new adaptation of mapping method to study mixing of multiphase flows in mixers with complex geometries

The main objective of the present work is to modify the traditional mapping method for the simulation of distributive mixing of multiphase flows in geometries involving moving parts such as, internal mixers or twin-screw extruders without a limitation on their geometrical periodicity. The periodicity condition, limits the results of traditional mapping method to tracking mapping mesh between specific discrete time intervals or distances for that geometry is repeated, hence, result is only for fixed orientation of rotors. Imaginary domain method is introduced to track mapping mesh from one state to the next free of geometrical periodicity limitations. In this work the method is introduced and its applicability and accuracy is discussed in details. A two-dimensional (2D) simulation of mixing of two Newtonian fluids with different viscosities in an intermeshing internal mixer is used as a test case study. In this example the key issues of ability to predict mixing state in details for all orientations of rotors is presented. To reduce diffusion errors of mapping method in the boundaries of the rotors, mapping mesh refinement technique that relies upon one single reference mesh is also presented.     

层流冷却在南钢中厚板卷厂的应用

轧后快冷，配合成份优化和控制轧制，可以使钢材获得良好的强韧性和焊接性能。本文介绍了南钢申厚板卷生产线上轧后控冷系统的选型、布置、结构特点、工艺特点和应用。该系统具有维护简单、控制灵活、冷却均匀、冷却能力强的特点，使南钢具备生产综合性能良好的钢板和钢卷的能力。并已经成功生产出X65管线钢和D36高强船板等高附加值产品。     

乙烯裂解炉内传递和反应过程综合数值模拟Ⅱ.反应管内传递和反应过程的数值模拟

采用乙烯裂解炉传递反应过程综合数学模型中的反应管数学模型，对工业裂解炉反应管进行了系统的数值模拟，得到了反应管内流场、温度场和浓度场的详细信息，揭示了反应管内流动、传热、传质和裂解反应的基本特点。模拟结果表明，沿反应管轴向油气吸热升温，裂解反应加剧，产物产率逐渐发生变化；沿反应管径向存在明显的流体流速和温度的变化，而产物产率的变化不如流体流速和温度的变化明显。通过比较湍流粘度和分子粘度的大小，认为29．975～30mm的径向区域为层流层，层流层的存在使得临近管壁的区域内流体流速和温度变化显著。     

Heat and Mass Transfer Analogy Studies of Binary Liquid Mixture in Comparison with Eteanol-n-Heptane Evaporating to Air

An expenmental and theoretical study of heat and mass transfer analogy and a comparison of that to a binary liquid mixture evaporation is presented. Common organic solvents, ethanol and n-heptane, were used to form an alcohol - hydrocarbon mixture. Studies were carried out in a horizontal rectangular channel having air flow velocities of 0.2 - 0.9 m/s. Heat transfer coefficients were measured with a copper plate resistor and mass transfer coefficients with a square pool. The heat and mass transfer analogy is presented for a system having two evaporating compounds with a fixed value of air flow and verified by measuring and comparing mass transfer coefficients for distilled water with air flow velocities of 0.2 - 0.9 mls. An illustrative example of the use of the theory for industrial ventilation is presented.     

板式薄层膜通道中压力行为的实验研究

对层流状态下膜分离装置内膜通道中压力行为的特性进行了研究，理论分析了膜通道中出现该压力行为的原因，并用根式膜进行了验证．实验结果证实了理论分析的正确性。     

Polar and Non-Polar Solvent Permeation Resistance of Blow-Molded Bottles of Polyethylene/Blends of Modified Polyamide and Polyamide 6 Clay Nanocomposite

Investigations on white spirit and acetone permeation resistance of modified polyamide and nylon 6 clay (MPANYC) blends and their corresponding polyethylene/MPANYC bottles were reported in this study. The white spirit and acetone permeation resistance of MPANYC sheets improve consistently with increasing NYC contents present in MPANYC resins after blending nylon 6 clay (NYC) in modified polyamide (MPA) resins. However, the order of barrier improvement of the PE/MPANYC and PE/NYC bottle specimens is not corresponding to the order of barrier improvement of the MPANYC and/or NYC barrier resins added in PE. The blow-molded PE/NYC bottle specimen exhibits similarly worse white spirit and acetone solvent permeation resistance as the PE bottle specimen, wherein no clearly formed NYC laminas but only dispersed NYC droplets or agglomerates were found on the fracture surfaces of the PE/NYC bottles. However, after blending optimum compositions of MPANYC in PE, the PE/MPANYC bottles with demarcated MPANYC laminas exhibit significantly better white spirit and acetone permeation resistance than the PE/MPA bottle, wherein the white spirit and acetone permeation rates of the PE/MPA₈NYC₁ bottle are about 1.3 and 1.4 times slower than those of the PE/MPA bottle, respectively. In order to understand these interesting barrier properties of PE/MPANYC and PE/NYC bottles, rheological, thermal, wide angle X-ray diffraction and morphological properties of the base MPANYC and NYC resins and their corresponding morphology present in the blow-molded bottles were investigated.     

Numerical solution of viscous flow past a solid sphere with the control volume formulation

The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed on improving the accuracy and efficiency of numerical simulation of similarproblems of fluid flow.In particular,the importance of suitable specification of the distortion func-tion to enforcing the far field boundarv conditions is emphasized.     

强化单螺杆挤出机内层流混合的方法

综述了单螺杆挤出机内聚合物熔体层流混合机理的研究进展，对提高混合的措施进行了分析总结，指出了进一步强化混合效果的方法。