基于非线性规划的指数自回归模型的辨识

讨论了指数自回归模型的辨识问题，证明了该模型最小二乘估计的目标函数的非凸性，并给出了使该函数为凸的条件，最后给出了辨识该模型的算法及该算法的收敛性，并以数值例子加以说明。     

An exploration of the problems of using function points mark II

Abstract. This paper examines critically the function point analysis mark II (FPA mark II) method of measuring the functionality of information systems. Although the focus of the paper is on FPA mark II as devised by Symons, both this and the Albrecht method, from which the FPA mark II was developed, are briefly discussed. The published attempts to validate FPA mark II are reviewed and then the problems encountered by the author in applying the approach are described. The final part of the paper is concerned with the fit between SSADM and FPA mark II.     

Design of pole-assignment controller for systems with algebraic-equation constraint

In this paper we have studied the control of linear systems with algebraic-equation constraint. A pole-assignment controller with two-layer structure for such constrained systems has been presented. The objective of the controller is to assign the desired poles to constrained system and simultaneously force the corresponding closed-loop system to satisfy the constraint. The conditions for the existence of pole-assignment controller are discussed in different cases. The implementation algorithm of pole-assignment controller is also presented. An example is given to illustrate the validity of the method in this paper.     

凸轮机构基圆半径的确定方法及其分析

基圆半径的确定方法，除了用图解法和试算法外，还可用解析法和图解分析法求解。４种方法各有优缺点，设计时要根据具体情况选择。     

可压缩体的滑移线场理论

从理论上建立了可压缩体的滑移线场理论，并给出了解析实例。研究表明：在平面应变条件下，可压缩体内的两族滑移线不仅不正交，而且随着平均正应力的不同而变化；可压缩体的平面应变问题可以直接采用现有的致密体的滑移线场来求出。     

A scheme to randomly generate surface dust points for the 3D complex variable boundary element method (CVBEM)

A scheme to randomly generate dust points on the surface of a three-dimensional (3D) object is proposed. This scheme will potentially eliminate the bias of a density of points which are approximately equally spaced on the surface, as well as eliminate possible weighting requirements for areas of higher density. This method has the potential to reduce computational effort, as fewer points might be required to define the surface area. The global trial function vector can be assigned to these dust points and then entered into the complex variable boundary element method (CVBEM) commercial code. This scheme can be applied to each piece of a system that is comprised of a connected multiple geometry. A noticeable benefit of this approach is that the same problem can be studied several times, using a new random distribution of surface points each time. The smallest error can then be determined and that run selected. The Mathematica code used to generate the scheme is attached as an appendix.     

网格曲面中孔洞的光滑填充算法研究

三角网格模型是几何描述的一种重要形式，有着广泛的应用。但三角网络模型常常会存在孔洞缺陷。这些孔洞的存在一方面影响视觉效果，另一方面会影响许多后续的操作，如快速原型制造、有限元分析等，因此有必要对这些孔洞进行修补。目前绝大多数孔洞填充算法是将网格模型中的孔洞提取成空间多边形，并对孔洞多边形进行三角化。这种处理方法的主要缺陷是没有考虑网格曲面在孔洞附近的几何形态，因而填充部分不能与整个曲面光滑地融为一体。笔者提出了一种三角网格曲面中孔洞的光滑填充算法。该算法根据孔洞周围网格曲面的几何信息来增加孔洞内部的采样点，然后再对增加的采样点进行三角化，较好地解决了填充部分与整体曲面光滑连接的问题。     

川中丘陵区一种新型小流域径流输沙模型的建立与应用

径流输沙模型对定量评价水沙的输出响应具有重要的意义。本研究在已有研究成果的基础上，通过对四川盐亭县林山西沟小流域的径流、泥沙进行现场观测与分析，提出含沙量单位线的定义及其确定方法，建立了适应该小流域的径流输沙模型。并应用实测资料进行比较，表明模型的模拟结果可靠，模拟过程确定性系数达0．8以上，为川中丘陵区小流域径流输沙过程的预测预报提供了一个新方法。     

伪波阻抗反演在准噶尔盆地永进油田储层描述中的应用

永进油田目的层产状平缓,断层不发育,储层厚度小、埋深大、描述困难。运用伪波阻抗技术对该区的储层进行了研究,取得了较好的效果。