Oxidation behavior of 2.25Cr-1Mo steel with prior tempering at different temperatures

The oxidation behavior of a normalized 2.25Cr-1Mo steel tempered previously for 10 hr at different temperatures between 873 and 1023 K has been studied up to a maximum duration of 1000 hr in air at 773–973 K. The oxidation resistance of the steel was found to decrease significantly with the temperature of tempering. Tempering of this steel is reported to cause microstructural changes involving precipitation of Cr as carbides and a decrease in the effective (free) Cr contents, that could influence the oxidation resistance of the Cr-containing alloys. Relative compositions across the thickness of the oxide scales, as analyzed by SEM/EDX and SIMS, suggest that a less Cr-rich (and less protective) and thicker scale on the steel formed because previous tempering caused extensive depletion of free Cr.     

Synthesis and characterization of LiNi0.45Co0.10Mn0.45O2 cathode for lithium ion batteries

1INTRODUCTIONAdvanced rechargeable lithium ion batteriesare attractive for use in consumer electronic andelectric vehicle(EV)application because of a fa-vorable combination of voltage,energy density,cycling performance,and have been developed rap-idly worldwide during the past decade[1,2].LiCoO2has been widely used as a cathode material in com-mercial lithiumion battery because it is reasonableeasy to synthesize and shows a stable discharge ca-pacity[3].But due to its high cost and toxic…     

应用软件工程学方法开发智能注塑模CAD／CAM系统

详述了应用软件工程学方法开发注塑模ＣＡＤ／ＣＡＭ系统软件的过程，利用结构化分析与设计思想，建立了注塑模ＣＡＤ／ＣＡＭ系统的ＩＤＥＦ０功能模型。并应用智能技术中的ＣＢＲ方法来辅助实现系统的决策过程，分析了系统设计中的一系列问题。整个系统体现了一种具有生长命周期和新的软件设计思想。     

Beneficial Effects of Rhenium Additions on the Cyclic-Oxidation Resistance of β-NiAl + α-Cr Alloys

This study reports the effects of up to 4 at.%rhenium addition on the cyclicoxidation behavior of-NiAl + -Cr alloys having a basecomposition (in at.%) Ni-40Al-17Cr. Tests were conductedin still air at 1100°C for up to 250 1-hr cycles.The ternary alloy (without rhenium addition) exhibitedpoor cyclic-oxidation resistance, undergoing extensivescale spallation and internal oxidation. Additions of rhenium considerably improved the oxidationbehavior, reducing the extent of both scale spallationand internal oxidation. These beneficial effectsincreased with increasing rhenium content. Rhenium additions improved cyclic-oxidation resistanceby both decreasing the solubility of chromium in the phase and causing the interdendritic -Crprecipitates in the alloy microstructure to become more spheroidized and disconnected. Theseeffects aided in preventing both interdendritic attackand the dissolution of the -Cr precipitates fromthe subsurface region of the alloy. The maintenance of -Cr precipitates at the alloy-scaleinterface decreased the extent of scale spallation byproviding a lower coefficient of thermal-expansion (CTE)mismatch between the alloy and theAl₂O₃-rich scale.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.     

Effect of NiAl Microcrystalline Coating on the High-Temperature Oxidation Behavior of NiAl–28Cr–5Mo–1Hf

The effect of an NiAl microcrystalline coating prepared by magnetron sputtering on the high-temperature oxidation behavior of NiAl–28Cr–5Mo–1Hf was investigated in static air at 1000–1150°C. The additions of Cr, Mo, and Hf changed the single -phase structure into a multiphase structure [-NiAl, -Cr(Mo), and Heusler phase]. The NiAl–28Cr–5Mo–1Hf alloy formed a nonprotective mixed scale of Al₂O₃+Cr₂O₃+HfO₂ and exhibited relatively large weight gains. The large weight gains were attributed to extensive internal oxidation. The sputtered NiAl microcrystalline coating remarkably improved the oxidation resistance of NiAl–28Cr–5Mo–1Hf due to the formation of a compact and adherent Al₂O₃ scale at all test temperatures. It was found that the --Al₂O₃ transformation caused the anomalous behavior of the oxidation–kinetics curves of the NiAl microcrystalline coating in the temperature range 1000–1150°C. A change in the morphology of scales occurred with the transformation.     

The influence of platinum on the maintenance of α-Al2O3 as a protective scale

The influence of externally located platinum on the isothermal stability of -Al₂O₃ scales formed at high temperatures has been examined. It has been observed that a nickel-base alloy forms an external scale of -Al₂O₃ during oxidation at 1200°C, but this scale breaks down isothermally, enabling a faster-growing Cr₂O₃-rich scale to develop. However, in the presence of platinum metal alongside the specimen in the furnace hot zone, the breakdown of the -Al₂O₃ scale is postponed for a substantial period of time. It appears that platinum, as the volatile species PtO₂, is incorporated into the growing -Al₂O₃ scale where it either influences the stress relief mechanism at temperature or reduces oxidation growth stress generation and thus significantly enhances the isothermal stability of the scale.     

某一转炉或精炼炉故障下炼钢-连铸生产重调度方法及应用

炼钢-连铸生产中会出现某一台转炉或精炼炉故障, 目前已有的重调度方法没有考虑多重精炼或只进行了仿真研究, 难以有效应用到具有多重精炼的钢厂, 而采用人工调整方式则容易导致炉次等待时间过长或断浇. 为此,通过引入炉次生产状态参数, 建立0-1 混合整数规划重调度模型, 提出由“未加工”炉次的设备指派、“未加工”炉次的开工时间优化和浇铸时间调整3 部分组成的重调度方法. 将该方法应用于某钢铁厂炼钢-连铸生产调度过程的实际工程应用验证了所提出方法的有效性.

     

A note on semidefinite relaxation for 0-1 quadratic knapsack problems

We investigate in this note solution properties of semidefinite programming (SDP) relaxation for 0-1 quadratic knapsack problem (QKP). In particular, we focus on the issue of uniqueness of the optimal solution to the SDP relaxation for QKP. We first give a counterexample which shows that the optimal solution to the SDP relaxation for QKP could be non-unique. This is in contrast with the case of unconstrained 0-1 quadratic problems. A necessary and sufficient condition is then derived to ensure the uniqueness of the optimal solution to the SDP relaxation for QKP.     

Quantifying requirements volatility effects

In an organization operating in the bancassurance sector we identified a low-risk IT subportfolio of 84 IT projects comprising together 16,500 function points, each project varying in size and duration, for which we were able to quantify its requirements volatility. This representative portfolio stems from a much larger portfolio of IT projects. We calculated the volatility from the function point countings that were available to us. These figures were aggregated into a requirements volatility benchmark. We found that maximum requirements volatility rates depend on size and duration, which refutes currently known industrial averages. For instance, a monthly growth rate of 5% is considered a critical failure factor, but in our low-risk portfolio we found more than 21% of successful projects with a volatility larger than 5%. We proposed a mathematical model taking size and duration into account that provides a maximum healthy volatility rate that is more in line with the reality of low-risk IT portfolios. Based on the model, we proposed a tolerance factor expressing the maximal volatility tolerance for a project or portfolio. For a low-risk portfolio its empirically found tolerance is apparently acceptable, and values exceeding this tolerance are used to trigger IT decision makers. We derived two volatility ratios from this model, the π-ratio and the ρ-ratio. These ratios express how close the volatility of a project has approached the danger zone when requirements volatility reaches a critical failure rate. The volatility data of a governmental IT portfolio were juxtaposed to our bancassurance benchmark, immediately exposing a problematic project, which was corroborated by its actual failure. When function points are less common, e.g. in the embedded industry, we used daily source code size measures and illustrated how to govern the volatility of a software product line of a hardware manufacturer. With the three real-world portfolios we illustrated that our results serve the purpose of an early warning system for projects that are bound to fail due to excessive volatility. Moreover, we developed essential requirements volatility metrics that belong on an IT governance dashboard and presented such a volatility dashboard.