The thermodynamic performance of a new solution cycle in double absorption heat transformer using water/lithium bromide as the working fluids

In this paper, a new solution cycle in the double absorption heat transformer is presented and the thermodynamic performance of this new cycle is simulated based on the thermodynamic properties of aqueous solution of lithium bromide. The results show that this new cycle is superior to the cycle being studied by some researchers. This new solution cycle has a wider range of operation in which the system maintains the high value of COP and has larger temperature lifts and operation stability. The relationship between the absorber and the absorbing evaporator is more independent and this makes the operation and control of the system more easier.     

水泥基压电复合材料的制备及极化工艺研究

采用压制成型法，首次以快硬早强的硫铝酸盐水泥为基体制备了水泥基压电复合材料。详细阐述了水泥基压电复合材料的制备过程；通过实验确定了适宜的极化条件，分析讨论了极化过程中出现漏电流的原因，并提出了一些初步的解决途径。结果表明，对硫铝酸盐水泥基压电复合材料来说，适宜的极化工艺参数：极化电场强度为4kV／mm，极化时间为45min，极化温度应低于130℃。     

OpenType字体技术

OpenType字体技术是Type字体和TrueType字体“大战”的产物，也是响应Unicode字符编码标准的产物，更是Adobe与Microsoft公司合作的产物。单从时间概念上考虑，这种字体技术其实并不新，现在重提OpenType字体，是因为CS2套件对于OpenType字体的全面支持，以及OpenType字体具有许多最要的特征。     

Compatibility between Polyamide 6 and Polycarbonate

Polyamide （PA6） and polycarbonate （PC） were prepared by a Brabender mixer （ PLV- 151） at 240℃ with 30 rpm for duration of 8 and 6 minutes respectively. The epoxy resin （E） addition can lead to substantial microstructural changes in the PA6/PC blends. Scanning electron microscope （SEM） was used to observe the mixtures characterized by the domains of clearly segregated homophases and voids between the two polymers. PA6/PC of polyamide 6 and polycarbonate with epoxy resin addition under the composition ratio of 20/80, 20/80/1, 40/60/1 and 40/60, were tested to verify the key role of epoxy in promoting the compatibility of PA6 with PC during blending.     

Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

Effet de la pression sur la transition ruisselant-pulsé dans les réacteurs catalytiques à lit fixe arrosé

The effect of pressure on transition displacement between trickle and pulsed regimes (TPR: trickle-pulsed transition) in catalytic trickle bed reactors (CTBR) is not properly predicted by existing theoretical models and empirical correlations. Based on high pressure TPR data available to date, a modified Charpentier diagram is proposed to quantify directly the effect of pressure in non-foaming systems.     

有机硅聚脲润滑脂的合成

本文报导一种新型润滑脂－ＨＺ－９２０８有机硅聚脲润滑脂的合成、分析了测试数据及应用效果，并就有关问题作了简要讨论。     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

Trade and spatial economic interdependence

Abstract. Regional scientists have had a long fascination with spatial economic interdependence, initially stimulated by the development of a suite of models in Isard (1960). In recent years there have been two major developments; first, a movement towards greater integration in model development not only with large-scale models, but also with careful attempts to make more components of the system endogenous. The second development has been the pursuit of greater integration than in earlier studies between theory and applied regional economic modelling, most notably in the area of trade and economic development. We explore some of the recent developments of this latter approach and provide an assessment of the current state-of-the art of some future opportunities.     

IDEF0与CPN的自动转换方法研究

在大型工程系统的建模与分析中,将系统的静态IDEF0模型转换为动态CPN模型的方法得到大量的应用,但是人工转换既繁琐也容易出错。该文在IDEF0和CPN模型的形式化表示分析的基础上,提出两种模型自动转换的一般步骤和方法。