Evolution axiale du coefficient de transfert de matière en colonne à bulles et en lit fluidisé triphasique

Liquid phase volumetric mass transfer coefficients for oxygen are determined in a three-phase fluidized bed and in a bubble column. The concept of exponential decreasing axial variation of volumetric mass transfer coefficient leads to a better representation of oxygen concentration profiles inside the column. Compared to the bubble column, k_la axial variations are more important in the lower part of the fluidized bed column, where solid particles increase the coalescence phenomenum, particularly with viscous liquids.     

Oligomer-Rich Fraction from Polydisperse Sample of Poly(bis(β-phenoxyethoxy)phosphazene)

Poly[bis(-phenoxyethoxy)phosphazene] [PBPEP] had been shown in our previous paper to be a very useful polymer for investigating the crystallization mechanism of polymers, as the crystallization rate of PBPEP is extraordinarily small when isothermally crystallized from the melt. The crystallization of the low molecular weight oligomers of PBPEP was first studied in comparison to the high molecular weight polymers. The oligomer-rich fraction was obtained by fractionation of the as-polymerized sample, which had a broad molecular weight distribution. The fractions thus obtained were characterized by solution viscometry and size exclusion chromatography. The melting temperature and the growth rate of the spherulite from the melt were investigated by differential scanning calorimetry and optical microscopy. The growth rate was one or two orders of magnitude smaller in the oligomer-rich fraction than in the other high molecular weight fractions. A collapsed spherulite appeared in the oligomer-rich fraction at high crystallization temperatures. It is speculated that in the oligomer-rich fraction there is an excess free energy due to defects in the crystal phase. This defect is considerably larger in the oligomer-rich fraction than in the other fractions because a large quantity of short length chains is present.     

Supramolecular π–π assembly of a neutral [Cu(salen)] complex via the templating effect of an ionic inorganic complex Na2[Cu(mnt)2] forming a framework type material having well-defined channels

A classical ionic inorganic complex Na₂[Cu(mnt)₂] (mnt²⁻ = maleonitriledithiolate = 1,2-dicyanoethylenedithiolate), that acts as a template in assembling neutral [Cu(salen)] (salen = bis(salicylidene)ethylenediamine) complexes forming a framework type arrangement, is accommodated in the channel formed in the crystal structure of a new type of host–guest compound [Cu(salen)]₄ · Na₂[Cu(mnt)₂] (1). The non-covalent supramolecular interactions among [Cu(salen)] complexes and between [Cu(salen)] and [Cu(mnt)₂]²⁻ complexes in the crystal lattice of 1 result in weak antiferromagnetic coupling.     

用于电脑磁头生产的电子级NMP质量监控方法

电子级NMP溶剂在电脑磁头生产中用作脱蜡剂、脱脂剂和污渍清洁剂。介绍了适用于电脑磁头生产的电子级NMP溶剂的质量控制项目(纯度、色度、水分、阴离子含量、硅油、微粒、pH值、重金属、有机痕量杂质、腐蚀试验等)和测试方法。     

The Chemistry of Water Treatment Processes Involving Ozone,Hydrogen Peroxide and Ultraviolet Radiation

Advanced oxidation processes are defined as those which involve the generation of hydroxyl radicals in sufficient quantity to affect water purification. The theoretical and (practical yield of OH from O₃ at high pH, 0₃/H₂0₂, O₃/UV and H₂O₂/UV systems is reviewed. New data is presented which illustrates the importance of direct photolysis in the O₃/UV process, the effect of the H₂0₂:0₃ ratio in the O₃/H₂O₂ process, and the impact of the low extinction coefficient of H₂O₂ in the H₂0₂/UV process.     

压挤成形--固化法制备0-3型压电复合材料的性能研究

详细地叙述了室温压挤成形———固化工艺制备 0 -3型压电复合材料工艺 ,使用XRD、SEM和HP42 94测试并分析了样品的结构和性能 ,并与压电陶瓷性能参数进行了对比 ;同时用这种工艺制备可以获得介电损耗小、机电耦合系数为 2 5 .11%、压电应变常数为 3 2PC N和机电品质因数可达到 3 0 2的 0— 3型压电复合材料。     

Suppression of the α → β-nickel hydroxide transformation in concentrated alkali: Role of dissolved cations

The presence of dissolved cations such as Al and Zn in alkaline electrolyte (6 M KOH) suppresses the -nickel hydroxide transformation. The uptake of Al (10 mol%) and Zn (30 mol%) exhibited by the active material likely stabilizes the -phase. Dissolved Al is deleterious to the performance of the nickel hydroxide electrode, whereas, dissolved Zn enhances the specific discharge capacity of nickel hydroxide by approximately 25% showing that the mode of metal uptake is different in the two cases.     

α-Tocopherol alteration of soybean antiherbivory toTrichoplusia ni larvae

The antioxidant vitamin E, -tocopherol, was tested as a candidate elicitor of alterable antiherbivory in soybean plants against cabbage looper larvae. Although a nonspecific antioxidant, vitamin E proved elicitory to the involved sulfhydryl-dependent receptor-energy transducer protein in soybean plasma membrane. Effects of -tocopherol were dependent on dosage, time, and space in the plant. The observed elicited effects were all decreases in herbivory. The best negative phytochemical correlate of looper feeding was the percentage of increased total HPLC peak area of extractables from elicited as compared to nonelicited leaves. Some specific compounds, e.g., glyceollins, were quantitatively major components of the total profile of secondary metabolites.     

The influence of an intermediate MoO3 layer on the solid state reaction of cobalt oxide withγ-Al2O3

In view of the importance for Co_xO_y,-MoO₃/-Al₂O₃ hydrodesulphurization (HDS) catalysts, the reactivity of cobalt oxide layers towards cobalt aluminate formation was investigated on both MoO₃-covered and bare -Al₂O₃ substrates. Co₃O₄/MoO₃/-Al₂O₃ and Co₃O₄/-Al₂O₃ systems were prepared by vapour-deposition of MoO₃ (12 × 10¹⁵ Mo atoms/cm²) and Co (400 × 10¹⁵ Co atoms/cm²) layers onto a -Al₂O₃ substrate, followed by oxidation of the Co layer to Co₃O₄. After annealing at 800°C for 40 h, the interfacial reaction to cobalt aluminate was assessed using Rutherford backscattering spectrometry. The presence of molybdenum oxide appeared to enhance cobalt aluminate formation. The Mo atoms, which spread out over the entire cobalt-containing layer, presumably caused a high defect density, which explains the observed higher reaction rate. The amount of MoO₃ was much too low to stabilize all cobalt atoms by cobalt molybdate formation.     

Assessment of a redox alkaline/iron-chelate absorption process for the removal of dilute hydrogen sulfide in air emissions

The oxidative absorption of hydrogen sulfide (H₂S) into a solution of ferric chelate of trans-1,2- diaminocyclohexanetetraacetate (CDTA) was studied in a counter-current laboratory column randomly packed with 15 mm plastic Ralu rings. The present investigation takes concern about the Kraft pulping situation where dilute H₂S concentrations are omnipresent in large-volume gas effluents. A fractional two-level factorial approach was instigated to determine the significance of six operating variables, namely the solution's alkalinity (pH; 8.5-10.5), the liquid mass flow rate (L;1.73-), the solution's ionic strength (I_C;0.01-), the gas mass flow rate (G;0.19-), the inlet H₂S concentration (C_H2S,0;70-430 ppm) and the initial ferric CDTA concentration (C_Fe,0;100 -). Initially, a Plackett-Burman design matrix of seven duplicated experiments revealed that pH is the leading factor controlling the H₂S conversion rate while the ionic strength and ferric CDTA concentration effects remained negligible within the factorial domain. Surface response analysis based on 11 duplicated factorial experiments plus 10 central composite trials revealed that the H₂S conversion significantly increases with liquid flow rate but decreases with growing H₂S load up. Further examination about the influence of ferric CDTA on H₂S absorption rate was set up over a broader concentration range (C_Fe,0;0- at pH of 9.5 and 10.5. It showed good potential at as H₂S conversion increased by a significant 25% for both pH values in comparison to pure alkaline solutions containing no ferric CDTA.