钻井参数仪的模块化设计方法研究

文章以模块化设计原理为基础，讨论了钻井参数仪的模块划分，模块化设计准则和主要设计内容。采用模块化设计方法、现场设备网络的开放网络和现场总线解决方案设计的钻井参数仪，具有传输信号稳定、可靠性高、抑制噪声能力强、组建现场网络成本低等特点。     

基于高频高压交流母线多组输出直流电源的研制

本电源是基于高频高压交流母线具有多组输出的直流电源，它具有高达200kHz的开关频率，后级的整流电路由于高频交流母线的存在，使得变压器和电感的设计变得简单，滤波电容的选择也更容易。本电源由PFC电路提供400V的高压直流输入，再由MOSFET组成全桥逆变电路，在固定额率的PWM发生电路和IR2110 MOSFET驱动电路作用下，只加—个谐振电感就可实现开关管的零电压开通，可在大大降低开关损耗和噪声的同时实现直流交流的变换。整流部分采用倍流整流电路以提高原边电压的利用率，可输出低压大电流。由于采用肖特基管，—方面可使得二板管的损耗可以接受，另外—方面还避免了采用同步整流电路所面临的电路结构复杂和驱动困难。     

A concept for the generation of out-of-plane distortion from tailored FRP laminates

The phenomenon of thermally induced distortions in unsymmetrical laminates is well understood, and it may be shown that a square, unsymmetrical 0.90 laminate will tend to form two stable geometries with a snap-through phenomenon between them. This paper discusses laminates in which at each point the lay-up is symmetrical across the laminate mid-plane, but which still exhibit multiple stable geometries. The number of stable geometries can be controlled by the details of the lay-up from the minimum of two to, in principle, an unlimited number. In addition it will be shown how a similar process can be used to generate multiple stable stress states and geometries in unidirectional laminates. This paper represents a very preliminary experimental investigation of the design space available for such composite laminates. Possible applications of composites with multiple stable geometries are noted.     

数字下变频器GC1012B原理及配置方法

数字下变频技术是软件无线电的一项核心技术,其性能的好坏直接影响数字接收机的精度。GC1012B是美国TI公司推出的新型数字下变频器。文中从GC1012B的结构特点和内部功能框图出发,分析其工作原理,并介绍GC1012B几个主要寄存器的配置方法,从而实现对频率、滤波模式、增益大小等参数的设置。最后给出了一个具体配置实例作为参考。     

VME总线评述

ＶＭＥ总线是应用最广泛的国际总线标准之一。本文介绍了ＶＭＥ总线的结构特别，包括信号名的定义及功能等，特别阐明了ＶＭＥ总线的并行性、实时性和高可靠性，突出了ＶＭＥ总线的发展前景。     

自动力套管补贴加固技术及其在B125井的应用

随着油田开发时间的延长，油水井井下套管的损坏将越来越严重，套管故障井将越来越多，为了恢复套损井生产，将套管损坏所造成的损失降到最低，在配套波纹管补贴，水动力补贴，爆炸补贴等专门修套技术的基础上，通过认真调查研究，又配套了操作方便简单，适用套管损坏类型广的自动力套管补贴加固技术，使各种套管变形，套管断错（错开没有位移或位移量不大时）、套管破裂，误射孔井段封堵，已射开水层封堵等修井作业的难度进一步降低，从而进一步提高了修复井综合开发经济效益。     

PCI接口芯片9080及其应用

CI9080是PLX公司开发的支持主从模式传输的PCI接口芯片。介绍了PCI总线的特性和PCI9080的主要特点、芯片内部结构,并详细分析了DMA,Direct Master,Direct Slave的传输特性和总线周期信号响应过程,以及PCI9080的总线工作模式、配置空间加载方式、上电初始化过程。最后给出了一个PCI数据采集卡的硬件设计框图和具体功能模块说明,旨在说明如何通过PCI9080设计PCI总线适配卡。     

Effect of Tongmai Decoction on expression of NF-κB in ox-LDL injured endothelial cells

Objective Study on the effect of NF-κB in ox-LDL injured HUVEC-304 and the intervention with the serum of Tongmai Decoction. Methods Tongmai Decoction herbage-contained serum was made by the serum pharmacology methods, then the HUVEC-304 cells were divided into 5 groups and incubated for 24 h: 1) normal group;2) fetal calf serum group; 3) ox-LDL group; 4) simvastatin group; 5) Tongmai Decoction group. RT-PCR was used to determine the mRNA of NF-κB in the cells, Western Blot Assay was used to determine the protein content of NF-κB in the cells. Results 1) Compared with the cells in normal group and serum control group , the endothelial cells in ox-LDL group are seriously injured, while those in Tongmai Decoction group grow better; 2) Compared with the cells in normal group and fetal calf serum group, the expressions of NF-κB gene and protein are up-regulated in ox-LDL group(P＜0.05, P＜0.01); 3) Compared with the cells in ox-LDL group, the expression of NF-κB gene and protein in Tongmai Decoction group are significantly down-regulated, there is no difference between Tongmai Decoction group and simvastatin group(P＞0.05). Conclusion Tongmai Decoction can protect the injured endothelial cells, up-regulate the expressions of NF-κB gene and protein content.     

基于B/S与C/S相结合的闸门自动调度系统

以上海市淀北片河网闸门为例,开发了以基于Web的B/S结构为主、B/S与C/S相结合的河网闸门自动调度系统,介绍了该系统的整体框架和各子系统的功能。经实践检验,基于B/S与C/S相结合的闸门自动调度系统发挥了B/S与C/S各自的优点,提高了防洪决策的及时性和准确性。