Oxidation behavior of 2.25Cr-1Mo steel with prior tempering at different temperatures

The oxidation behavior of a normalized 2.25Cr-1Mo steel tempered previously for 10 hr at different temperatures between 873 and 1023 K has been studied up to a maximum duration of 1000 hr in air at 773–973 K. The oxidation resistance of the steel was found to decrease significantly with the temperature of tempering. Tempering of this steel is reported to cause microstructural changes involving precipitation of Cr as carbides and a decrease in the effective (free) Cr contents, that could influence the oxidation resistance of the Cr-containing alloys. Relative compositions across the thickness of the oxide scales, as analyzed by SEM/EDX and SIMS, suggest that a less Cr-rich (and less protective) and thicker scale on the steel formed because previous tempering caused extensive depletion of free Cr.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.     

Intermetallic phase formation in directionally solidified Al−Si−Fe alloy

The present study has been undertaken to better understand the solidification behavior of Al−Si−Fe alloys containing 7wt.% Si and 0.9wt.% Fe, with particular regard to the formation of phase during controlled solidification and influence of growth rates on intermetallic phase selection. The alloys studied were Al-7Si-0.9Fe alloys, which were produced by a modified Bridgman solidification arrangement. These alloys were solidified unidirectionally with different growth rates (1–30mm/min). The solidified microstructure of these alloys consists of the growth of primary aluminum and multiple second phase reactions.     

TYPHOON PROCESS AND ITS IMPACT ON THE SURFACE CIRCULATION IN THE NORTHERN SOUTH CHINA SEA

A severe typhoon Utor,occurring between July 3 and 8,2001,brought heavy rainfall,strong wind and storm surge.Utor was responsible for tremendous destruction and economic losses in Philippines,Taiwan and Guangdong.An air-sea model system (MM5 and Princeton Ocean Model(POM))was built to simulate meteorological dynamics and ocean circulation in the South China Sea(SCS).In the POM the output of MM5 was used as the input data.With an increased number of vertical levels,a high-resolution planetary boundary layer scheme and updated landuse/vegetation data,the accuracy of computing wind,temperature and other meteorological fields are improved in near surface and upper levels in MM5 simulations.The simulated trajectory and wind speed of Utor are close to the observed results.The simulated distribution of rainfall is accorded well with measured data in the Pearl River Delta(PRD)area.At different meteorological stations in Hong Kong,the wind,temperature and sea surface pressure are well simulated.The simulated ocean surface current and surface temperature fields have an obvious rightward-biased response to the typhoon Utor,and the maximum velocity and the lowest temperature region appear in the 30 km of the right side of the typhoon track.The typhoon Utor could make the water 50m under the surface ocean unwell to surface and the ocean surface temperature decrease by about 2°C.     

Small sample improvements in the threshold cointegration test using residual-based moving block bootstrap

A residual-based moving block bootstrap procedure for testing the null hypothesis of linear cointegration versus cointegration with threshold effects is proposed. When the regressors and errors of the models are serially and contemporaneously correlated, our test compares favourably with the Sup LM test proposed by Gonzalo and Pitarakis. Indeed, shortcomings of the former motivated the development of our test. The small sample performance of the bootstrap test is investigated by Monte Carlo simulations, and the results show that the test performs better than the Sup LM test.     

Direct 5-axis tool-path generation from point cloud input using 3D biarc fitting

In reverse engineering, geometrical information of a product is obtained directly from a physical shape by a digitizing device. To fabricate the product, manufacturing information (usually tool-path) must be generated from a CAD model. The data digitized must be processed and in most cases, a surface model is constructed from them using some of the surface fitting technologies. However, these technologies are usually complicated and the process for constructing a surface patch from a massive digitizing data is time-consuming. To simplify the process for getting tool-path information, a simple algorithm is proposed in this paper. The algorithm is used to generate a 5-axis machining tool-path. Instead of implementing any complicated surface fitting techniques, a direct method is proposed for constructing three-dimensional (3D) triangular mesh from the digitizing data with the mesh points considered as the tool contact locations. Depending on the locations of the points digitized, a decimation procedure is applied such that some of the digitizing data will be filtered out. Then, the tool axis orientations which must be determined in 5-axis tool-path are calculated and the tool center locations are determined accordingly. A 3D biarc fitting technique is applied for all the tool center locations so that a complete 5-axis tool-path is obtained.     

Computing presentations for subgroups of polycyclic groups and of context-free groups

Algorithms for solving uniform decision problems for algebraic structures crucially depend on the chosen finite presentations for the structures under consideration. Rewriting techniques have been used very successfully to solve uniform decision problems, when the presentations considered involve finite, noetherian, and ()-confluent rewriting systems. Whenever the class of algebraic structures considered is closed under the operation of taking finitely generated substructures, then the algorithms for solving the uniform decision problems can be applied to the substructures as well. However, since these algorithms depend on the form of the presentations, this involves the task of constructing a presentation of a certain form for a substructure given a presentation of this form for the structure itself and a finite set of generating elements for the substructure.This problem, which has received a lot of attention in algebra, is here investigated from an algorithmic point of view. The structures considered are the following two classes of groups, which have been studied extensively before: the polycyclic groups and the context-free groups.Finitely generated context-free groups can be presented by finite, monadic, and -confluent string-rewriting systems. Due to their nice algorithmic properties these systems provide a way to effectively solve many decision problems for context-free groups. Since finitely generated subgroups of context-free groups are again contextfree, they can be presented in the same way. Here we describe a process that, from a finite, monadic, and -confluent string-rewriting system presenting a context-free groupG and a finite subsetU ofG, determines a presentation of this form for the subgroup U ofG that is generated byU. For finitely presented polycyclic groups we obtain an analogous result, when we use finite confluent PCP2-presentations to describe these groups.This work was performed while this author was visiting at the Fachbereich Informatik, Universität Kaiserslautern, during his sabbatical 1991/92     

Effects of the Si/Al atomic ratio on the activity of Cu-ZSM-5 catalysts for nitric oxide decomposition

A review of literature data for nitric oxide decomposition over Cu-ZSM-5 catalysts leads us to conclude that the turnover frequency depends on the Si/Al atomic ratio in a way opposite to the trend suggested by Iwamoto and co-workers and considered correct by Shelef in a recent letter published in this Journal. In particular we show that the turnover frequency increases with the number of Al atoms per unit cell (i.e. decreasing the Si/Al atomic ratio). This result suggests that the most active sites for NO decomposition over Cu-ZSM-5 catalysts may contain two close copper ions.     

Ship detection based on multi-scale weighted fusion

Ship surveillance plays an important role in ensuring the safety of maritime transportation and navigation. Due to the influence of factors such as waves and special weather, the existing detection methods still cannot balance the accuracy, speed and the parameters of the model in the changeable and complex marine environment. To solve this problem, this paper proposes an improved real-time method based on YOLOv5, which has few parameters and achieves high detection accuracy with little memory and computation cost. Collaborative Attention (CA) mechanism is added to the network structure, which enables the model to more accurately locate and identify target regions. We also design a Spatial Pyramid Pooling module (SPP) and a weighted pyramid network called Bidirectional Feature Pyramid Network (BiFPN) based on the characteristics of the ships to better fuse feature information. Transformer encoder is introduced to capture long-distance dependencies and preserve global and local features to the greatest extent. Furthermore, the ability of our proposed structure to localize objects at each stage is improved through integrating the output of multiple modules. The experimental results show that, the comprehensive performance of this method is better than the existing technology in ship detection on different evaluation criteria.