一个低电阻率油气藏的测井评价

根据J油田大量岩芯分析资料,应用油藏流体分布理论和毛管压力计算方法,研究该油田低电阻率油气层的形成原因认为:地层水矿化度高(多数>20万ppm);微细孔隙发育,束缚水含量高;粘土矿物含量高且分布在碎屑颗粒表面等是形成低电阻率油气层的主要原因.一般常规测井评价时,对这种低电阻率油气层容易误释而丢弃.依据油气藏流体分布原理,应用毛管压力方法计算原始含油饱和度,可准确地识别出这种低电阻油气层,并可预测其产能.     

气浮池──稳定塘处理造纸废水

叙述了用气浮地→厌氧塘→兼性塘处理造纸废水的试验与设计。经运行后测定，出水达到了天津市水污染物排放标准的要求。气浮池采用３０％的回流比，提高了处理效率，每天可回收纸板原料８．４～１０．８ｔ。     

复合钙钛矿Pb（Fe1／2Nb1／2）O3的弛豫特性

制备了纯钙钛矿相Ｐｂ（Ｆｅ１／２Ｎｂ１／２）Ｏ３（ＰＦＮ）陶瓷，研究其介电性能表明，ＰＦＮ陶瓷无论退火与否都存在弥散性相变（ＤＰＴ）现象，未退火试样εｍａｘ对应的温度Ｔｍ不随测量频率变化，退火试样的Ｔｍ随频率变化，即表现出Ｔｍ频率色散现象，结合ＸＲＤ分析，指出ＰＦＮ应属弛豫铁电体。     

Prediction of the elastic behaviour of hybrid and non-hybrid woven composites

A micromechanical model called MESOTEX is presented for prediction of the elastic behaviour of composites reinforced with non-hybrid weave (plain weave, satin weave and twill weave) and hybrid weave (hybrid plain weave and hybrid twill weave) fabrics. By using the classical thin laminate theory applied to each woven structure, this analytical model takes into account the strand undulations in the two directions and also integrates the geometrical and mechanical parameters of each constituent (resin, fill and warp strands). A representative volume is chosen for each woven composite and the fibre architecture is described by several functions. To determine the effectiveness of this analysis, the elastic properties predicted for each woven composite are compared with experimental results and results extracted from the literature. This correlation shows excellent agreement between measured and predicted values, with a very low calculation cost (CPU time of less than 0·01 s).     

A three-dimensional measurement system for robot applications

This paper presents a 3D noncontacting sensor system designed to measure the position and orientation of a robot end effector. This measurement system includes two parts: a tridimensional object including four spheres placed along the axes of a tetrahedron and a set of three orthogonally pointed cameras. The purpose is to design a measurement system characterized by easy relationships in order to satisfy real-time constraints. The system has been used in two experiments: first, to calibrate a parallel robot and validate the geometrical control performance, then as an exteroceptive sensor in an assembly task. The system computes position and orientation of the tetrahedron in 100 ms time. The position and orientation accuracy are, respectively, 0.6 mm and 0.2 deg in a workspace, being a cube with 0.3 m sides.     

MOCVD生长的CdZnTe／ZnTe多量子附的激子光学特性

用常压ＭＯＣＶＤ方法在ＧａＡｓ（１００）衬底上生长了ＣｄＺｎＴｅ／ＺｎＴｅ多量子阱。在室温下，观测到了ＣｄＺｎＴｅ／ＺｎＴｅ多量子阱的三个谱带发光。根据ＣｄＺｎＴｅ／ＺｎＴｅ多量子阱的吸收光谱和不同激发光强下的发光光谱，分别归结ＣｄＺｎＴｅ／ＺｎＴｅ多量子阱中观测到的三个发光谱带于覆盖层发光、ｎ＝１的重空穴激子发光及杂质发光。     

未知钍—铀比的误差分析

研究了在任意Th、U含量和Th-U比覆盖整个范围(即0≤Th/U≤∝)时总α计数率对年剂量的转换因子及其误差。结果表明,当不测定Th-U比而只测量总α计数率时,最终引起的年龄误差对0≤Th/U≤∝来说为±5.1％-±8.3％,对1.1≤Th/U≤9.5来说只有±2.5％％-±4.1％。     

基于μC/OS的TCP/IP协议栈设计与实现

文章以基于ARM7架构的LPC2124构成的嵌入式硬件系统为平台,设计和实现了面向数据采集领域的精简TCP/IP协议栈,应用于测量数据的远程传输。测试结果表明协议栈运行稳定。已在某型水声信号遥测系统中得到成功应用。     

基于工业以太网的上位机监控系统

该文以自动套色控制系统为例,详述了基于工业以太网的网络控制系统的硬件构成,以及上位机与远程PLC之间的实时监控系统,上位机为基于DOS系统的工控机,采用C语言进行实现,能够实现整个系统的数据采集、数据保存、曲线显示、实时控制等功能,该上位机界面友好,实现了数据的开放性、传输能力和控制器的人机交互性,并通过工程实践验证了本软件的功能。     

从萨沃伊别墅探究勒·柯布西耶的机器美学

文章论述了萨沃伊别墅的机器美学思想,主要结合了勒·柯布西耶在1926年提出的"建筑新五点"来探讨他所主张的机器美学在萨沃伊别墅上是如何得以实现。