Electrochemical injection of organic corrosion inhibitors into carbonated cementitious materials: Part 1. Effects on pore solution chemistry

This series of investigations was intended to clarify phenomena associated with electrochemical injection of the organic base corrosion inhibitors, ethanolamine and guanidine, into carbonated concrete. In Part 1, experiments were conducted with laminated specimens of carbonated cement paste, that were specially designed to facilitate analysis with adequate spatial resolution to assess changes in their pore solution phase chemistry after they had been subjected to constant current electrolysis between embedded cathodes and external anodes. The anolyte solutions provided sources of ethanolamine or guanidine in contact with the exterior specimen surfaces. Effects of variations in the applied current density and duration of electrolysis on the concentration profiles of the two inhibitors and the other main constituents of the pore solution phase were determined. The results have been used to underpin the development of a mathematical model, which is described in Part 2.     

Ti9Al合金的氢塑性效应

采用真空自耗电弧炉熔炼制备Ti9Al合金，通过渗氢处理显著提高氢含量，在凸轮塑性试验机ЧПИ-2上以10mm／min的速度进行热模拟试验。研究发现：氢可以降低Ti9Al合金的相变温度，扩大α β区的温度范围；氢作为卢稳定剂会妨碍或完全抑制以Ti3Al为基的α2相的析出；钛合金的氢合金化可促使卢相在更低温度下稳定化，明显地提高了Ti9Al合金塑性。     

2A14-T6铝合金大规格棒材时效制度的研究

2A14铝合金大规格棒材性能不稳定，在生产中抗拉强度常达不到国家标准要求。经过一系列热处理工艺试验，确定了2A14-T6合金大规格棒材的人工时效制度。     

高浓度熟料溶出的工艺研究

优化烧结法生产 ,提高产量、节约能耗是氧化铝生产急需解决的问题之一。实现高浓度溶出可以提高精液浓度 ,减少湿法系统物料流量 ,达到提高产能、增加产量、降低成品成本的目的。本文通过对国内外高浓度熟料溶出发展情况和烧结法影响高浓度溶出的因素进行分析研究 ,提出了提高熟料A/S的必要性 ;指出了适合我国条件的熟料A/S大小和生料配方 ;分析了温度和αk 对溶出和分离的影响机理和规律 ;提出了适合高浓度溶出的溶出条件和浓度大小。对生产有一定的指导意义。     

Importance of initial surface film in the degradation of stainless steels by atmospheric exposure

The surface compositions of stainless steels types 304, 316, 430, and 444 combined with four types of surface finishes, 2B finish, hairline polishing, mirror polishing, and bright annealing, were measured by ICP-AES, EPMA, and XPS before exposure. The surface finish that most enriched the chromic species in the surface film was mirror polishing, followed by bright annealing, 2B finish, and hairline polishing. The order of corrosion-resistance was type 444, type 316, type 304, and type 430. The surface compositions were correlated with the rating number and pitting depth after exposure to atmospheric environments. The rating number had a high positive correlation with the concentration of Cr in the surface film, and had a slight correlation with the near-surface composition measured by EPMA at 12 kV, but did not show any correlation with bulk composition within the composition range covered in the present work. This same trend was observed for pitting depth. It was concluded that the cationic concentration of Cr in the surface film before atmospheric exposure is the prime factor in controlling the resistance of stainless steels to atmospheric corrosion.     

高密度脉冲电流对A356铝合金凝固组织的影响

研究了高密度脉冲电流对A356铝合金凝固组织的影响，实验中对液相线以下溶体的凝固过程在不同阶段进行电脉冲处理。对比实验结果表明：经过电脉冲处理后，A356的合金凝固组织得到明显细化；在同样的电脉冲条件下，凝固组织细化效果与电脉冲放电开始时间有关，凝固过程中放电开始时间越早，凝固组织细化效果越明显；反之，凝固组织细化效果较差；同时，脉冲充电电压越高，凝固组织细化程度越大。定量计算了脉冲电流产生的电磁力并分析了脉冲电流影响凝固组织的作用机制。     

Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

This paper introduces a new titanium alloys surface strengthening treatment by using the arc-added glow discharge plasmas non-hydrogen carburization technique. High purity and high strength graphite is selected as cooling cathode arc source for supplying carbon atoms and particle, which migrate to the titanium alloy(Ti6Al4V) surface and form modified layer. Thus, the hydrogen embrittlement is avoided while the tfibological behavior of the titanium alloy surface is improved in the respects of anti-friction and anti-wear ability.The tribological behavior of the modified layer under dry sliding against SAE52100 steel was evaluated on a ball-on-disc test rig. The results showed that the modified layer obtained a thickness of 30μm at 980℃, 30minutes. The microhardness of the Ti6Al4V alloy surface attained 936 HV, which was much larger than that of the Ti6AI4V alloy. The Ti6AI4V alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface modified layer experienced much abated adhesion wear and scuffing under the same testing condition. This could be attributed to the carbon dement with different modalities exists in the modified layer.The modified layer showed good friction-reducing and fair anti-wear ability in dry sliding against the steel. Using the SEM,XRD and XPS, the phase structure and morphology of the carburization modified layer was analyzed.     

固溶处理对电解制备的A356合金硅颗粒的影响

以电解低钛铝基合金为原料制备了A356合金,研究了在535℃下固溶处理时间对合金共晶硅相细化、球化和分布的影响.测量了硅颗粒的长径和短径,计算了颗粒的直径和长短径比值等参数,分析了上述参数随固溶时间的变化及其概率密度分布.实验结果表明:由该电解合金制备的A356合金经2～4 h的固溶处理,共晶硅就可得到较好的细化和球化效果,具有较高的分布集中度;A356合金的固溶处理时间可有效缩短.     

Continuous cleaning of A356 alloy melt using high frequency electromagnetic field

A set of device for electromagnetic separation (EMS) was designed and applied to process the continuous flowing melt. Tensile test was employed to compare effect of electromagnetic separation with that of the traditional processes. Compared with filtration by ceramic foam filter and process without filtration, multiple process combined with filtration and electromagnetic separation can effectively remove most of inclusions with diameter finer than 10μm in A356 alloy casting, hence improve its tensile properties. After being processed by electromagnetic filtration,the tensile strength of A356 scrap is enhanced by 8.27%, approaching the level of fresh A356 alloy.     

Influence of expandable graphite on fire resistance and water resistance of flame-retardant coatings

Expandable graphite (EG) coating and ammonium polyphosphate-pentaerythritol-melamine (APP-PER-MEL) coating were prepared. Thermal degradation and char formation of the coatings were investigated by differential thermal analysis (DTA), thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results have shown that the anti-oxidation and fire-resistant properties of expandable graphite coating containing EG with size of 74 μm are better than those of APP-PER-MEL coating. The static immersion test was applied to study water resistance of the coatings, and the fire protection test and mechanical test were used to analyse heat insulation and mechanical properties of coatings before and after water immersion. The fire-resistant and mechanical properties of APP-PER-MEL coating were severely damaged by water immersion, whereas EG coating containing 8.5% EG with size of 74 μm could retain the good fire resistance even after 500 h water immersion.