Modeling air flow in sanitary sewer systems: A review

Current designs of sanitary collection systems normally only consider the transport of wastewater without attention on the air movement in the sewer airspaces. Under anaerobic conditions, hydrogen sulfide (H₂S) can be generated in the liquid phase in sewer systems. H₂S is corrosive to concrete and steel structures and odorous or even toxic to human, which can cause corrosion and sewer odor issues. To develop a feasible sewer corrosion and odor control strategy, it is necessary to understand the mechanisms of air flow in sewer systems for developing practical tools to predict and control the air flow. This paper comprehensively reviewed previous efforts on modeling the air flow in sewer systems and provided recommendations on predicting the air flow for engineering applications. The air flow in a single pipe was firstly reviewed followed by the air flow in sewer structures as well as air flow models in sewer networks. Some other considerations such as temperature driven flow, transient water flow, and wind effect were also reviewed. The knowledge gaps were then identified, and recommendations on the further studies were provided.     

空管系统中键盘快捷功能的研究与实现

目前国内空中交通管制系统人机界面的操作越来越趋于人性化,从可用、能用到好用的人机界面发展过程中,软件提供快捷的功能和方便的操作流程起到了很重要的作用,因此研究软件开发对键盘快捷键的支持就显得尤其重要。本文对可以实现的方法进行比较,分析实现方法的优劣,提出了一种实现键盘快捷功能的方法。     

From ethnographic record to system design

This paper explores the issues involved in moving from ethnographic explorations of work in context to a practical contribution to system design. It does so using the example of an interdisciplinary research project involving sociologists and computer scientists in the domain of air traffic control systems. It forms a pair with another paper (Sommerville et al., 1992) exploring these questions from the perspective of our computer science partners. We characterise ethnography as a research method, and consider the differences between undertaking it for strictly sociological or anthropological purposes by contrast with interdisciplinary and design purposes. We summarise some of our results in ethnographic explications of the work of air traffic controllers, and the sociality which it manifests. We describe the dialogues involved in rendering these observations informative for systems design, and the mutual translations implied in attempting to reconcile sociological with software engineering questions about supporting the work. We conclude by specifying some features of cooperative work which an engineering approach is in danger of overlooking; the ways, and limits, in which ethnographers can form a bridge between users and designers; and some of the conflicts of interest entrained in generating technical change.The research is funded by the UK MRC/SERC/ESRC Cognitive Science/HCI Initiative with the title Social Analysis of Control Systems for HCI Design, grant number SPG 8931598. The computer science partners are Professor Ian Sommerville, Dr Tom Rodden, Dr Pete Sawyer and Mr Richard Bentley. Thanks are due to Val King, Kjeldt Schmidt, Ian Sommerville and Tom Rodden for very helpful comments on earlier drafts of this paper.     

纯电动汽车太阳能辅助空调控制系统的硬件设计

纯电动汽车车载动力电池是其唯一的动力源且很有限,辅助设备消耗的电能减少了纯电动汽车的续驶里程,尤其是空调,所以开发高效的纯电动汽车空调系统是纯电动汽车能够被市场接受的关键。将纯电动汽车顶盖布满太阳电池,可以使空调系统的制冷能力增强,同时还能增加纯电动汽车的行驶距离。对小型纯电动汽车的太阳能辅助空调系统进行研究,设计出适合该空调的自动控制系统,可为纯电动汽车创造出一个更加舒适的驾驶和乘座环境。     

基于FLUENT的烘干机参数优化

为了解决烘干机烘室内气流分布不均匀,导致烘干成品质量参差不齐的问题,采用FLUENT软件和正交试验相结合的方法,以风速为评价指标,对不同参数下烘干房内的气流进行模拟分析。同时用极差分析法和标准差相结合的方法对评价指标进行分析,得出最佳的参数组合,并对其进行仿真模拟分析。结果表明:烘干房烤盘间距为10 mm、出风口大小1 000 mm×230 mm、进风流速为4.5 m/s时,烘干效果最好,为优化烘房设计参数的研究提供了理论依据。     

Review on the effect of heat exchanger tubes on flow behavior and heat/mass transfer of the bubble/slurry reactors

Bubble/Slurry bubble column reactors(BCR/SBCR) are intensively used as multiphase reactors for a wide range of application in the chemical, biochemical and petrochemical industries. Most of these applications involve complicate gas–liquid/gas–liquid–solid flow behavior and exothermic process, thus it is necessary to equip the BCR/SBCR with heat exchanger tubes to remove the heat and govern the performance of the reactor. Amounts of experimental and numerical studies have been carried out to describe the phenomena taking place in BCR/SBCRs with heat exchanger tubes. Unfortunately, little effort has been put on reviewing the experiments and simulations for examining the effect of internals on the performance and hydrodynamics of BCR/SBCR. The objective of this work is to give a state-of-the-art review of the literature on the effects of heat exchanger tubes with different types and configurations on flow behavior and heat/mass transfer, then provide adequate information and scientific basis for the design and the development of heat exchanger tubes in BCR/SBCR, ultimately provide reasonable suggestions for better comprehend the performance of different heat exchanger tubes on hydrodynamics.     

压力机气垫故障分析

介绍分析了机械压力机气垫通常出现的故障现象，以及应采取的排障措施。     

真空压铸的发展

真空系统是压铸过程中排除气体的最有效的方法之一。然而，真空压铸的发展几经起伏，现在则发展到一个新的阶段。从模具中抽出气体是几种抽气方法中较为简便的一种。真空气道的设计与常规气道则有所不同     

COMPARISON BETWEEN THEORETICAL FORMULA AND EXPERIMENTAL RESULTS ON BUBBLE ELECTROPHORESIS

ＣＯＭＰＡＲＩＳＯＮＢＥＴＷＥＥＮＴＨＥＯＲＥＴＩＣＡＬＦＯＲＭＵＬＡＡＮＤＥＸＰＥＲＩＭＥＮＴＡＬＲＥＳＵＬＴＳＯＮＢＵＢＢＬＥＥＬＥＣＴＲＯＰＨＯＲＥＳＩＳ￥ＸｕＪｉｒｕｎ；ＫｅｌｓａｌｌＧＨ（Ｐ．Ｏ．Ｂｏｘ１３９，ＮｏｒｔｈｅａｓｔｅｒｎＵｎｉ...     

用人工神经网络方法预测鼓泡塔气含率

A new correlation for the prediction of gas hod up in bubble columns was proposed based on an extensive experimental database set up from the literature published over last 30 years .The updated estimation method relying on artificial neural network,dimensional analysis and phenomenological approaches was used and the model prediction agreed with the experimental data with average relative error less than 10%.