128×128元IRCCD成像技术

研制成功了１２８×１２８元ＰｔｓｉＩＲＣＣＤ，获得了清晰的室温目标热像。文章叙述了该摄像机驱动逻辑电路的设计、驱动方式的研究和视频信号、数字信号的处理。     

注水站微机数据采集与控制系统

用工控机组成了油田注水站数据采集系统．给出了系统的组成及测量方法，并讨论了系统的可靠性等问题．     

机载雷达空时二维信号处理自适应权值训练的距离分段递推算法

本文针对机载预警雷达的杂波环境，分析了杂波数据的非平稳性，由此提出在距离上分段实现空时二维自适应处理（STAP）的方法，并通过分析杂波于空间的距离来确定分段的方法。在同时考虑实时性和处理器性能的前提下，给出了一种自适应权值计算的递推算法。理论分析和计算机仿真结果均表明，本文提出的分段递推算法是有效的。     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

Saw and digital technologies in mutlicarrier demodulators

One key technology, for the implementation of future on-board processing payloads, is the multicarrier demodulator (MCD). The MCD is instrumental in allowing FDMA/TDM access schemes which optimize the use of on-board and ground resources in VSAT networks. This paper deals with the analogue and digital implementations of MCD, trying to assess the fields of application of each of the two technologies.     

数字图像边缘检测算子的性能实验比较

本文对数字图像中几种具有代表性的边缘检测算子进行了理论分析，并通过VC编程实验，对各种算法进行实现，通过比较得出了各自的优缺点和适用范围。     

利用光纤数字同步传送网2.048 Mbit/s支路传送高精度标准时间信号

首次提出一种利用光同步数字传送网的2.048Mbit/s信号传送高精度时间编码信号的方法和实验结果。它可以使整个通信网的交换机、计费系统、网管系统、基站控制器等设备实现与UTC的时间同步。目前的实验证明,时间同步的不确定度优于±5μs。     

液晶微位移传感器

液晶微位移传感器的工作原理是以负介电各向异性的向列相液晶材料的动态散射效应为基础的，文中给出了这种传感器的结构，测量方法、精度、应用范围和实验结果；研究了在阈值电压附近光的吸收和散射，讨论了该传感器的稳定性和遥控方法。     

反射补偿式光纤位移传感器的理论分析

概述了反射式光纤传感器的发展。讨论了这类光纤传感器理论分析中所采用的纤端出射光场光强径向均匀分布的假设。给出了纤端出射场的光通量分布函数,并以全光路补偿反射式光纤探头为例,建立了补偿机理的理论分析方法,给出了传感特性调制函数的解析表达式。最后,简要分析了这类光纤传感器的温度稳定性问题。     

Impacts of spectral band difference effects on radiometric cross-calibration between satellite sensors in the solar-reflective spectral domain

In order for quantitative applications to make full use of the ever-increasing number of Earth observation satellite systems, data from the various imaging sensors involved must be on a consistent radiometric scale. This paper reports on an investigation of radiometric calibration errors due to differences in spectral response functions between satellite sensors when attempting cross-calibration based on near-simultaneous imaging of common ground targets in analogous spectral bands, a commonly used post-launch calibration methodology. Twenty Earth observation imaging sensors (including coarser and higher spatial resolution sensors) were considered, using the Landsat solar reflective spectral domain as a framework. Scene content was simulated using spectra for four ground target types (Railroad Valley Playa, snow, sand and rangeland), together with various combinations of atmospheric states and illumination geometries. Results were obtained as a function of ground target type, satellite sensor comparison, spectral region, and scene content. Overall, if spectral band difference effects (SBDEs) are not taken into account, the Railroad Valley Playa site is a “good” ground target for cross calibration between most but not all satellite sensors in most but not all spectral regions investigated. “Good” is defined as SBDEs within ± 3%. The other three ground target types considered (snow, sand and rangeland) proved to be more sensitive to uncorrected SBDEs than the RVPN site overall. The spectral characteristics of the scene content (solar irradiance, surface reflectance and atmosphere) are examined in detail to clarify why spectral difference effects arise and why they can be significant when comparing different imaging sensor systems. Atmospheric gas absorption features are identified as being the main source of spectral variability in most spectral regions. The paper concludes with recommendations on spectral data and tools that would facilitate cross-calibration between multiple satellite sensors.