一种改进的应用于噪声数据中的KNN算法

基于实例的KNN算法不可避免地要依赖于数据的质量,但原始数据含有噪声,因而KNN算法的结果势必会因为数据中的噪声而受到严重的影响。事实上,大多噪声都服从一定的模型,而且模型一般是已知的。充分利用数据中的噪声模型,以减小噪声对KNN算法结果的影响。通过实验结果表明该方法是有效的。     

矢量中值滤波改进算法研究

在众多彩色图像滤波算法中,矢量中值滤波算法应用最为广泛,但VMF算法在处理每一像素时,计算复杂度较高,这就限制了它在一些领域中(例如实时系统)的应用.在保留VMF算法优点的前提下,通过数据的重用,降低计算的复杂度.实验结果表明,一定程度的数据重用能有效提高算法的运行效率.     

Precise identification of moving vehicular parameters based on improved glowworm swarm optimization algorithm

This paper proposes an indirect method for the identification of moving vehicular parameters using the dynamic responses of the vehicle. The moving vehicle is modelled as 2-DOF system with 5 parameters and 4-DOF system with 12 parameters, respectively. Finite element method is used to establish the equation of the coupled bridge–vehicle system. The dynamic responses of the system are calculated by Newmark direct integration method. The parameter identification problem is transformed into an optimization problem by minimizing errors between the calculated dynamic responses of the moving vehicle and those of the simulated measured responses. Glowworm swarm optimization algorithm (GSO) is used to solve the objective function of the optimization problem. A local search method is introduced into the movement phase of GSO to enhance the accuracy and convergence rate of the algorithm. Several test cases are carried out to verify the efficiency of the proposed method and the results show that the vehicular parameters can be identified precisely with the present method and it is not sensitive to artificial measurement noise.     

Hull-form optimization in calm and rough water

The paper presents a formal methodology for the hull form optimization in calm and rough water using wash waves and selected dynamic responses, respectively. Parametric hull form modeling is used to generate the variant hull forms with some of the form parameters modified, which are evaluated in the optimization scheme based on evolutionary strategies. Rankine-source panel method and strip theories are used for the hydrodynamic evaluation. The methodology is implemented in the optimization of a double-chine, planing hull form. Furthermore, a dual-stage optimization strategy is applied on a modern fast displacement ferry. The effect of the selected optimization parameters is presented and discussed.     

基于SQL的多条件选择智能实现算法

B/S架构的信息系统开发中,一般情况下,根据用户的选择,n个条件的输入组合数是2n个。但是,该文中提出的算法,其组合数仅为n到n(n+1)/2,大大简化了编程。     

Optimization of optical lens-controlled scanning electron microscopic resolution using generalized regression neural network and genetic algorithm

A scanning electron microscope (SEM) is a sophisticated equipment employed for fine imaging of a variety of surfaces. In this study, prediction models of SEM were constructed by using a generalized regression neural network (GRNN) and genetic algorithm (GA). The SEM components examined include condenser lens 1 and 2 and objective lens (coarse and fine) referred to as CL1, CL2, OL-Coarse, and OL-Fine. For a systematic modeling of SEM resolution (R), a face-centered Box–Wilson experiment was conducted. Two sets of data were collected with or without the adjustment of magnification. Root-mean-squared prediction error of optimized GRNN models are GA 0.481 and 1.96×10^-12 for non-adjusted and adjusted data, respectively. The optimized models demonstrated a much improved prediction over statistical regression models. The optimized models were used to optimize parameters particularly under best tuned SEM environment. For the variations in CL2 and OL-Coarse, the highest R could be achieved at all conditions except a larger CL2 either at smaller or larger OL-Coarse. For the variations in CL1 and CL2, the highest R was obtained at all conditions but larger CL2 and smaller CL1.     

Development of a sequential robust–tolerance design model for a destructive quality characteristic

Robust design (RD) and tolerance design (TD) have received much attention from researchers and practitioners for more than two decades, and a number of methodologies for modeling and optimizing the RD and TD processes have been studied. However, there is ample room for improvement. Because most existing research considers RD and TD as separate research fields, the primary objective of this paper is to develop a sequential robust–tolerance design method to jointly determine the best factor settings and the closed-form solutions for the optimal specification limits. We then apply the proposed method to a destructive quality characteristic. Finally, a case study and sensitivity analyses are performed for verification purposes, and further studies are discussed.     

An inexact hybrid projection-proximal point algorithm for solving generalized mixed variational inequalities

In this paper, we investigate an inexact hybrid projection-proximal method for solving a class of generalized mixed variational inequalities in Hilbert spaces. We construct a general inexact hybrid projection-proximal point algorithm, in which an inexact relaxed proximal point step is followed by a suitable orthogonal projection onto a hyperplane. Under some suitable conditions concerned with the pseudomonotone set-valued mapping T, the nonsmooth convex function f and the step size λ_k, we prove the convergence of the inexact hybrid projection-proximal point algorithm for solving generalized mixed variational inequalities in Hilbert spaces.     

Growing fuzzy topology adaptive resonance theory models with a push-pull learning algorithm

A new incrementally growing neural network model, called the growing fuzzy topology ART (GFTART) model, is proposed based on integrating the conventional fuzzy ART model with the incremental topology-preserving mechanism of the growing cell structure (GCS) model. This is in addition, to a new training algorithm, called the push-pull learning algorithm. The proposed GFTART model has two purposes: First, to reduce the proliferation of incrementally generated nodes in the F2 layer by the conventional fuzzy ART model based on replacing each F2 node with a GCS. Second, to enhance the class-dependent clustering representation ability of the GCS model by including the categorization property of the conventional fuzzy ART model. In addition, the proposed push-pull training algorithm enhances the cluster discriminating property and partially improves the forgetting problem of the training algorithm in the GCS model.