Effect of hybridizing Biogeography-Based Optimization (BBO) technique with Artificial Immune Algorithm (AIA) and Ant Colony Optimization (ACO)

Hybridization in optimization methods plays a very vital role to make it effective and efficient. Different optimization methods have different search tendency and it is always required to experiment the effect of hybridizing different search tendency of the optimization algorithm with each other. This paper presents the effect of hybridizing Biogeography-Based Optimization (BBO) technique with Artificial Immune Algorithm (AIA) and Ant Colony Optimization (ACO) in two different ways. So, four different variants of hybrid BBO, viz. two variants of hybrid BBO with AIA and two with ACO, are developed and experimented in this paper. All the considered optimization techniques have altogether a different search tendency. The proposed hybrid method is tested on many benchmark problems and real life problems. Friedman test and Holm–Sidak test are performed to have the statistical validity of the results. Results show that proposed hybridization of BBO with ACO and AIA is effective over a wide range of problems. Moreover, the proposed hybridization is also effective over other proposed hybridization of BBO and different variants of BBO available in the literature.     

Realization of active power filter based on indirect current control algorithm using Xilinx system generator for harmonic elimination

Realization of active power filter with Model Based Design approach is presented in this paper. The approach adopts different modeling platforms as well as selection of proper hardware for step wise verification and testing. The active power filter model is developed using the Matlab/Simulink platform for single phase. The efficiency of the control algorithms such as synchronous detection method and indirect current control for active power filter is analyzed. Efficient control algorithm is developed by Xilinx system generator which is incorporated into Simulink as Xilinx tool box. Xilinx system generator provides a virtual platform for easy and effective design of the required system models in FPGA (field programmable gate array) design environments. Optimized automatic VHDL code is generated for the control algorithm which is simulated using ISE 13.2 for the generation of switching signals for the control of IGBTs of the active power filter. Suitable compensation signal is generated from the active power filter for the better elimination harmonics to improve the power quality. THD is reduced to a considered value which is able to satisfy the limits of the IEEE standard.     

Ti对Nb-20Si-5Al超高温合金性能的影响

采用放电等离子烧结法(SPS)制备了Nb-20Si-5Al-xTi(x=0,18,20,22,摩尔分数)超高温合金,研究了Ti加入量对Nb-20Si-5Al合金的室温断裂韧度和高温抗氧化性的影响。结果表明,随着Ti加入量的增加,超高温合金的相组成由Nbss、Nb₅Si₃和Al3Nb相转变成为Nbss、(Nb,Ti)5Si3和Ti相。Ti能明显改善Nb-20Si-5Al超高温合金的断裂韧度和高温抗氧化性能,随着Ti加入量的增加均先提高然后降低,在Ti加入量为20%时,合金断裂韧度最大,为7.41 MPa·m^1/2,相比未加Ti时提高了约56.9%,其高温氧化速率最低,为0.72×10^-4g²/(cm⁴·h)。添加Ti元素后,其氧化产物中出现Ti₂Nb₁₀O₂₉、TiNb₂O₇、TiO₂等,可以提高其氧化膜的致密性,从而提高高温抗氧化性能。     

实用主义代码70后中国建筑师之建筑数字观

文章指出,70后中国建筑师站在计算机带来的新技术变迁的时代前沿从电脑普及化到电脑计算化,首当其冲受到技术革命带来的设计方法和过程改变的洗礼,从而对数字设计具有敏锐触觉。70后受到的教育延续布扎体系,深悉建筑本质：几何形态、空间、质感,光线和建构。＂建房子＂的迫切需求让70后的数字时代的建筑观具有强烈实用主义的特征,这样的特征给在中国建筑实践和教育中崛起的70后带来了产生新建筑形态语言和思潮可能的机会。     

煤基均聚聚丙烯1100N与市场同类石油基产品链结构组成与性能对比分析研究

采用核磁共振仪、傅里叶红外光谱仪、热重分析仪、差示扫描量热仪和力学测试等手段,研究了煤基均聚聚丙烯1100N及对比牌号链结构等微观结构、结晶行为、热性能及力学性能等。结果表明,与市场石油基同类产品相比,煤基均聚聚丙烯1100N具有链结构缺陷低、等规度高、易结晶、耐热性能和刚性好的优势,但抗冲击性能略低于同类产品。     

TACR压力管与排管间辐射换热分析

辐射换热是钍基先进CANDU型反应堆(TACR)压力管和排管间换热的主要途径.本文以灰体辐射模型和电网络分析方法为基础建立了TACR压力管和排管间辐射换热的计算模型,利用该模型计算了给定温度边界和热流密度边界的情况下,压力管和排管间的辐射换热能力.计算结果表明,该模型可以用于TACR压力管和排管间辐射换热能力的计算.     

铁铝红颜料的研制与生产探讨

铁铝红是一种发色鲜艳、生产稳定、价格低廉的颜料，为提高该颜料在基础釉中的适应性，文章通过对比实验数据分析，对颜料的配方和生产方法进行了探讨，并提出了实际性的生产方案。     

第三十三讲:基于工业无线网络技术的智能交通服务平台

随着流程工业的快速发展,设备维护系统在生产过程中的地位日益受到重视。为了克服传统的定期维修的不足,本文提出了一种基于无线振动检测的设备维护系统.文中介绍了系统的组成和各部分的功能,包括无线振动检测仪表、WIA无线通信网络、智能故障诊断专家系统。     

Tribological Behavior of Aluminum Alloys Implanted with Nitrogen,Titanium Then Acetylene

The composition depth profiles, structure and ball-on-disk frictional characteristics of aluminum alloys 2024 plasma-based ion implanted with nitrogen, titanium and nitrogen then acetylene were investigated. The layers implanted with nitrogen then with nitrogen and titanium and finally with acetylene included three zones: a top DLC (diamond-like carbon) zone, a C, Ti and N coexisting intermediate zone which undergoes chemical changes forming TiC, Ti(C,N), TiN, (Ti, Al)N and AlN second phases, and the bottom zone of the substrate. The micro-hardness and nano-hardness of these layers are HK7.8 GPa and 22 GPa, respectively. The layers showed lower friction coefficient and higher wear resistance. The Raman spectra for worn tracks after sliding for different numbers of cycles showed that when the loading was 1 N after sliding 10,000 cycles, a slight graphitization phenomenon of the DLC film is found. If the loading was 20 N, the graphitization phenomenon of the DLC film is more obvious after sliding 2000 cycles. The SEM morphologies of the wear tracks showed that when the load was 1 N, after sliding 7200 cycles the wear is from rubbing and abrasive wear. When the load was 20 N, after sliding 2000 cycles, delamination wear is dominant.     

基于色彩共生矩阵的CBIR方法

介绍了一种基于色彩共生矩阵提取颜色-纹理特征的图像检索方法。在灰度共生矩阵方法的基础上,发展出色彩共生矩阵方法,解决了灰度共生矩阵方法不能有效处理真彩色图像的缺陷,并从色彩共生矩阵中提取颜色和纹理特征用于图像检索。该方法易于实现、特征库简洁高效,且具有较好的检索效果。