基于CB的串行口和接口板端口程序应用

串行口及接口板端口是计算机通信的主要途径 ,也是目前计算机工程测控中通用的基本方法。C Builder (简称CB)编程语言以其功能完备、开发效率高的特点而成为目前流行的程序开发工具 ,介绍了利用CB语言编写串行口和端口通信的程序的方法 ,并对具体的各方法编写了相应的示例。     

Fracture toughness of PAN-based carbon fibers estimated from strength-mirror size relation

Fracture toughness (K_IC) of representative high-strength type PAN (polyacrylonitrile)-based carbon fibers, Torayca™ T300 and T800H, with or without artificial surface defects, were estimated to be ca. 1 MPam^1/2 from the tensile strength vs. fracture mirror size relation, assuming a constant crack-to-mirror size ratio. The corresponding critical energy release rate (Γ) was ca. 7.4 J m⁻², which was close to the value derived from the reported surface energies for a graphite crystal. Similar K_IC values were obtained for the old-type PAN-based carbon fibers from the reported data by the use of the present estimation procedure.     

基于MODBUS协议的激光雕刻切割系统HMI人机交互设备

近年来,国内激光雕刻切割控制器技术发展迅速,基于PC的传统控制器已相当成熟.为了显著提高工业生产效率,适应工业生产规模扩张的需要以及工业对系统稳定性要求的提高,目前国内几家专业运动控制器厂家已经实现了激光雕刻切割控制器的完全脱机运行.本文针对脱机控制器的需要设计一款人机交互设备,该设备采用AT89C55WD单片机为主控制器,采用标准的MODBUS协议实现HMI与脱机控制器的可靠通讯.     

MCF5282的I2C总线在uClinux操作系统下的驱动程序设计

介绍了Freescale公司嵌入式微处理器MCF5282的原理、特点,给出了该处理器在嵌入式操作系统uClinux下通过I2C硬件扩展数字输入的原理,以及I2C总线的驱动程序设计流程.     

遗传算法在GSM移动通信网络频率规划中的应用

应用遗传算法设计和开发了针对爱立信GSM900系统的频率规划软件。在设计中，采用了交叉点存储、变异回退以及分割分步降维的方法，从而提高遗传算法的执行速度。     

Fracture and deformation properties of Ni-Fe superalloy in cryogenic high magnetic field environments

The present paper includes experimental and analytical data on the fracture properties of a nickel-iron superalloy, a ferromagnetic austenite, at 4 K in magnetic fields of 0 and 6 T. The tensile, notch tensile and small punch tests are employed. A finite element analysis is also performed to convert the experimentally measured load-displacement data into useful engineering information. To interpret the results we review the available theory of the influence of magnetic field on the stress intensity factor for a crack in ferromagnetic materials.     

An Improved Immune Genetic Algorithm for Solving the Optimization Problems of Computer Communication Networks

1　IntroductionIndesigningacomputercommunicationnet work ,thenetworkaveragedelayisanimportantpa rameterinthenetworkperformance .Inthispaper,weonlyconsiderM /M/1networks,whichmeansthatthemessageprocessingtimeisaprobabilisticdensityfunctionwithnegativepower,thegroupar rivalandsendingisofPoissiondistributionwithasinglequeue .Supposethatthenetworktopologicalstructureandtheestimatesoftheexternaltrafficrequirementsaregiven ,howtoselecttheoptimalroutestobeusedbythecommunicatingnodesinthenetworksoast…     

基于ISP1581的USB2.0键盘数码管控制设备的固件编程

基于ISPl581的USB2．0键盘数码管控制设备的设计严格遵循USB2．0协议，体现了USB即插即用、易扩展、低干扰的特点，实现了主机和设备之间简单、快速、可靠的连接和通信。文章介绍了基于ISP1581的USB2．0键盘数码管控制设备的硬件、软件的设计方法。     

卷积码的线性系统

介绍了卷积码的线性离散时不变系统模型。从建立卷积码的状态变量方程出发,研究了卷积码的代数结构,并详细论述了基于状态变量方程描述的迭代译码算法。     

X-ray diffraction and Raman scattering in SbSI nanocrystals

Lattice structure and rod-like shaped SbSI nanocrystals obtained by ball milling with rod thickness down to 70 nm, as estimated from X-ray diffraction (XRD) and electron microscopy, is similar to that of the bulk crystals. The dependence of the grain size on the milling duration is discussed in view of the chain-like crystalline structure of SbSI. Possible factors, responsible for the observed Raman line broadening, are discussed, scattering by surface phonons being considered the predominant one.