Combustion of methane over palladium ZSM-5 and mordenite catalysts

The effect of Pd-loading on Pd-NaZSM-5 and Pd-NaMordenite catalysts prepared by ion exchange was studied for methane combustion with excess oxygen (1% CH₄, 18% O₂, balance N₂) in the temperature range 40–500°C. Fresh and calcined samples (3 h, 450°C) showed methane conversions proportional to Pd-loading on Pd-NaZSM-5 catalysts, while conversions decreased with Pd-loading on calcined Pd-NaMordenite catalysts. TOF (number of methane molecules converted per second per Pd²⁺ ion) for over exchanged Pd-NaZSM5-116 was low as compared to under exchanged Pd-NaZSM5-80 and Pd-NaZSM5-58 samples. Close TOF's were found for the last two samples at 330°C. TOF differences in Pd-NaMordenite catalysts demonstrate the heterogeneity of Pd⁺² sites due to structurally nonidentical locations of cations. TOF's appear to be related to Na/Pd ratios in both catalyst types. Apparent activation energies for Pd-NaZSM-5 materials are higher than those for Pd-NaMordenite catalysts.     

改性5A分子筛对水中As(Ⅴ)的吸附作用研究

改性5A分子筛是一种高效吸附材料。实验用5A分子筛作为载体,制备了该吸附剂,并表征了其基本性质。结果表明,改性5A分子筛对As(Ⅴ)具有很高的吸附率和选择性;室温下,pH=7时,改性5A分子筛吸附As(Ⅴ)的吸附等温线符合Langmuir型和Freundlich型。     

Electrocatalytic activity of oxidation products of guanine and 5′-GMP towards the oxidation of NADH

We have studied the potential electrocatalytic activity towards the oxidation of NADH of several oxidation products of guanine and its derivative guanosine-5′-monophosphate (5′-GMP) on pyrolytic graphite electrodes (PGE). The distribution of products generated strongly depends on the experimental conditions. Our investigations focused on the oxidation products that are adsorbed on the electrode surface, are redox active and, exhibited electrocatalytic activity toward the oxidation of NADH. These compounds were electrochemically and kinetically characterized in terms of dependence of the formal potential on pH and electron transfer rate constant (k_s). The voltammetric and catalytic behavior of both guanine and 5′-GMP oxidation products was compared with that of other guanine derivatives we have previously studied. Some mechanistic aspects concerning the generation of the catalysts are also discussed.     

Oxidation behavior of 2.25Cr-1Mo steel with prior tempering at different temperatures

The oxidation behavior of a normalized 2.25Cr-1Mo steel tempered previously for 10 hr at different temperatures between 873 and 1023 K has been studied up to a maximum duration of 1000 hr in air at 773–973 K. The oxidation resistance of the steel was found to decrease significantly with the temperature of tempering. Tempering of this steel is reported to cause microstructural changes involving precipitation of Cr as carbides and a decrease in the effective (free) Cr contents, that could influence the oxidation resistance of the Cr-containing alloys. Relative compositions across the thickness of the oxide scales, as analyzed by SEM/EDX and SIMS, suggest that a less Cr-rich (and less protective) and thicker scale on the steel formed because previous tempering caused extensive depletion of free Cr.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.     

Intermetallic phase formation in directionally solidified Al−Si−Fe alloy

The present study has been undertaken to better understand the solidification behavior of Al−Si−Fe alloys containing 7wt.% Si and 0.9wt.% Fe, with particular regard to the formation of phase during controlled solidification and influence of growth rates on intermetallic phase selection. The alloys studied were Al-7Si-0.9Fe alloys, which were produced by a modified Bridgman solidification arrangement. These alloys were solidified unidirectionally with different growth rates (1–30mm/min). The solidified microstructure of these alloys consists of the growth of primary aluminum and multiple second phase reactions.     

Small sample improvements in the threshold cointegration test using residual-based moving block bootstrap

A residual-based moving block bootstrap procedure for testing the null hypothesis of linear cointegration versus cointegration with threshold effects is proposed. When the regressors and errors of the models are serially and contemporaneously correlated, our test compares favourably with the Sup LM test proposed by Gonzalo and Pitarakis. Indeed, shortcomings of the former motivated the development of our test. The small sample performance of the bootstrap test is investigated by Monte Carlo simulations, and the results show that the test performs better than the Sup LM test.     

Direct 5-axis tool-path generation from point cloud input using 3D biarc fitting

In reverse engineering, geometrical information of a product is obtained directly from a physical shape by a digitizing device. To fabricate the product, manufacturing information (usually tool-path) must be generated from a CAD model. The data digitized must be processed and in most cases, a surface model is constructed from them using some of the surface fitting technologies. However, these technologies are usually complicated and the process for constructing a surface patch from a massive digitizing data is time-consuming. To simplify the process for getting tool-path information, a simple algorithm is proposed in this paper. The algorithm is used to generate a 5-axis machining tool-path. Instead of implementing any complicated surface fitting techniques, a direct method is proposed for constructing three-dimensional (3D) triangular mesh from the digitizing data with the mesh points considered as the tool contact locations. Depending on the locations of the points digitized, a decimation procedure is applied such that some of the digitizing data will be filtered out. Then, the tool axis orientations which must be determined in 5-axis tool-path are calculated and the tool center locations are determined accordingly. A 3D biarc fitting technique is applied for all the tool center locations so that a complete 5-axis tool-path is obtained.     

Computing presentations for subgroups of polycyclic groups and of context-free groups

Algorithms for solving uniform decision problems for algebraic structures crucially depend on the chosen finite presentations for the structures under consideration. Rewriting techniques have been used very successfully to solve uniform decision problems, when the presentations considered involve finite, noetherian, and ()-confluent rewriting systems. Whenever the class of algebraic structures considered is closed under the operation of taking finitely generated substructures, then the algorithms for solving the uniform decision problems can be applied to the substructures as well. However, since these algorithms depend on the form of the presentations, this involves the task of constructing a presentation of a certain form for a substructure given a presentation of this form for the structure itself and a finite set of generating elements for the substructure.This problem, which has received a lot of attention in algebra, is here investigated from an algorithmic point of view. The structures considered are the following two classes of groups, which have been studied extensively before: the polycyclic groups and the context-free groups.Finitely generated context-free groups can be presented by finite, monadic, and -confluent string-rewriting systems. Due to their nice algorithmic properties these systems provide a way to effectively solve many decision problems for context-free groups. Since finitely generated subgroups of context-free groups are again contextfree, they can be presented in the same way. Here we describe a process that, from a finite, monadic, and -confluent string-rewriting system presenting a context-free groupG and a finite subsetU ofG, determines a presentation of this form for the subgroup U ofG that is generated byU. For finitely presented polycyclic groups we obtain an analogous result, when we use finite confluent PCP2-presentations to describe these groups.This work was performed while this author was visiting at the Fachbereich Informatik, Universität Kaiserslautern, during his sabbatical 1991/92     

Effects of the Si/Al atomic ratio on the activity of Cu-ZSM-5 catalysts for nitric oxide decomposition

A review of literature data for nitric oxide decomposition over Cu-ZSM-5 catalysts leads us to conclude that the turnover frequency depends on the Si/Al atomic ratio in a way opposite to the trend suggested by Iwamoto and co-workers and considered correct by Shelef in a recent letter published in this Journal. In particular we show that the turnover frequency increases with the number of Al atoms per unit cell (i.e. decreasing the Si/Al atomic ratio). This result suggests that the most active sites for NO decomposition over Cu-ZSM-5 catalysts may contain two close copper ions.